similar to: installing asterisk for Ubuntu Synaptic

Hello group I just update to the newest CVS now I'm not able to get asterisk to start. No error during the make or make install I did a make clean before the make;make install Any help would be great!!!! Here is the output asterisk -vvvvvgcd Parsing /etc/asterisk/asterisk.conf Parsing /etc/asterisk/extconfig.conf == Binding realtime_ext to mysql/realtime/extensions_table == Binding

Anyone have any idea what this is talking about. Here is my zapata.conf [channels] switchtype=5ess signalling=pri_cpe echocancel=yes echocancelwhenbridged=yes echotraining=400 callerid=asreceived group=1 context=default musiconhold=default faxdetect=incoming channel => 1-23 Here is my zaptel.conf span=1,1,0,esf,b8zs bchan=1-23 # set this to 1-15,17-31 for E1 dchan=24 # set this to 16 for

Looking at the error I tried moving chan_modem* out of the modules folder and asterisk started and its working again... Not sure what changed in the chan_modem_i4l.so but removing it from the folder fixed my problem. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Eric Hall Sent: Sunday, January 23, 2005

Installing DevkitLite hardware (Very similar to John Lange's post on Tue Oct 08 2002) I cannot get anything to work on the phone connected to the s100u. I dont know what to do. Can someone please help me? I used the sample configuration files from digium documentaion that was supposed to be "sane" defaults for the kit. Very similar to John Lange's post on Tue Oct 08 2002 Here

Folks, I've just successfully set up Asterisk (as part of the Asterisk Management Portal installation). When I say "successfully", I mean that I have gone through all the steps detailed for the installation of AMP and not hit any snags there. I can connect to my asterisk server via ssh and can also connect via Http to the portal to change settings in AMP. Now I'm trying to

After upgrading from asterisk-10.5.0 to asterisk-11.1.2, I am getting a Segmentation fault. [root at localhost asterisk-11.1.2]# asterisk -vvvvvvc Asterisk 11.1.2, Copyright (C) 1999 - 2012 Digium, Inc. and others. Created by Mark Spencer <markster at digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components

I have a pretty basic Mandrake 10.2 w/KDE 3.2 and I installed Asterisk-1.0.1-2mdk. I installed the source of main and contrib from ftp, so at the install time I accepted all the packages needed to be installed too. The installation went smooth, but when I try to execute asterisk (#asterisk -vvv) I encounter few warnings I end with an error. At this point I didn't touch any conf file, I was

Hi: I deleted old modules in /usr/lib/asterisk/modules before make install. I built zaptel and libpri before asterisk. Modprobe zaptel and modprobe -v wctdm executed witiout complaint. Starting asterisk produced the output below with several warnings and a failure. Can someone help, please. I double-spaced the warnings in the text below. The first warning is about music on hold because it

Hi, Ive been struggling with asterisk for a few days now. I understand pretty much how it works and how to tie things together (SIP -> SIP internally works fine etc), but just cannot get asterisk to work with an X100P clone (its a Ambient MD3200, if that means anything to you guys). I have tried (initially) asterisk 1.07 with zaptel 1.07, and now Asterisk CVS-HEAD with zaptel cvs. Both give

Hi, First i would like to thank the kind people of the list who have answered my previuos mail, but i am still stuck as asterisk still crashes upon startup, i have read the install article at http://www.voip-info.org/wiki-Asterisk+Step-by-step+Installation and i have search the asterisk archives, but i still cant get asterisk to work, i have tried reinstalling asterisk but it still complains and

Hello all, HI i am very new to asterisk and my boss needs me to investigate setting up asterisk for a new client. I have downloaded and installed (make, make install and make progdocs)asterisk on my personal computer and when i try to run it (./asterisk -vvvc) i get the following output below: NOTE: i am running REDHAT 9.0 on a 796MHz cpu machine: I am excited to be able to work with asterisk

Trying to config the latest Asterisk/zaptel with an Digium Wildcard and a single X100m FXO interface connected to a POTS analog line. Build and install of both work ok - I'm using Suse 8 on a dual Pentium box. I load the driver with "modprobe wctdm" and the LED on the wildcard lights up. Then I start Asterisk with "asterisk -vvvgc" and asterisk fails to start. The

When I do a 'asterisk -vvvvvc' I get following, but asterisk does NOT stay up: == Parsing '/etc/asterisk/asterisk.conf': Found == Parsing '/etc/asterisk/extconfig.conf': Found

Hi: I deleted old modules in /usr/lib/asterisk/modules before make install. I built zaptel and libpri before asterisk. Modprobe zaptel and modprobe -v wctdm executed witiout complaint. Also, ztcfg shows 4 channels configured, as it should. Starting asterisk produced the output below with several warnings and a failure. Can someone help, please. I double-spaced the warnings in the text below

Asterisk don't running, because show this message WARNING[6949]: chan_sip.c:8865 reload_config: Section 'authentication' lacks type WARNING[6949]: chan_iax2.c:7491 load_module: Unable to open IAX timing interface: No such file or directory WARNING[6949]: chan_skinny.c:2587 reload_config: Unable to get our IP address, Skinny disabled WARNING[6949]: chan_oss.c:239 sound_thread: Read

Hello! Asterisk "CVS-HEAD-08/06/04-14:55:13" won't start on two of three different Gentoo machines. This is the output of gdb: ultra asterisk # gdb /usr/sbin/asterisk GNU gdb 6.0 Copyright 2003 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions.

Greetings I was getting bad static crackle on a phone, so I reload from the latest CVS and did a make clean ; make install on zaptel, libpri and asterisk Now I get this error [chan_skinny.so] => (Skinny Client Control Protocol (Skinny)) May 28 13:59:42 WARNING[16384]: chan_skinny.c:2541 reload_config: Unable to get our IP address, Skinny disabled Urgent handler [chan_oss.so] => (OSS

After doing an update from SUSE 9.2 to 9.3 and Checking out the latest from CVS, Asterisk crashes on startup with an apparent MySQL (res_config_register) error: # asterisk -vvvgc > asterisk_startup_error1.log asterisk: symbol lookup error: /usr/lib/asterisk/modules/res_config_mysql.so: un defined symbol: ast_cust_config_register The log is shown below. I've seen the posts

Has anyone had any luck with PostgreSQL and Realtime? The realtime instructions on voip-info seem pretty straight forward... just not woking for me. I've included all of my config files below, and my console output. Entire console bootup output: [root@abox asterisk]# /usr/sbin/asterisk -vvvvvvc == Parsing '/etc/asterisk/asterisk.conf': Found == Parsing

Hi I?m a new user and I do test with my hardware . I have a x100p and telephone vozip. And when I run this command asterisk ?vvvvc for to test it . My computer show it ?warning? [chan_iax.so] => (Inter Asterisk eXchange) == Manager registered action IAX1peers == Parsing '/etc/asterisk/iax1.conf': Not found (No such file or directory) Apr 2 07:45:12 ERROR[16384]: