similar to: FAX using T38

Hello to all, Is there an "how-to" for asterisk and setting up a t38 fax gateway (SIP) ? I look at http://bugs.digium.com/view.php?id=5090 to patch asterisk chan_sip.c file. What are the next steps to get a t38 fax gateway with asterisk ? Regards Harry PS: I use hylafax server. ___________________________________________________________________________ Faites de

Friends in the Asterisk.org community, There is a lot of cool stuff going on in Asterisk development, things that will change Asterisk and make it work better in your organisation, make it easier to sell in your area or give you more consulting oppurtunities - in short, functionality that will make a lot of sense for you users. However, developers can't really get anywhere without a

Hi, I remember seeing a T38 Gateway application for Asterisk 1.6 floating around, but I can't seem to find it again. Does anyone have any pointers to it? I really want to be able to send an incoming T38 connection directly to the PSTN. Thanks. -- James

Hi I have finished the installation of my VoIP basic configuration ... Actually: - All calls from my E1 are received by a Cisco AS5300 and sent to my Asterisk (in G711 by SIP). - All user are connected by SIP to the Asterisk - All calls from User are sent by asterisk to the Cisco AS5300 Now, i want see if i can supply T38 Fax Gateway .... I am search to: - Cisco Receive all

Gentlemen, I have 3 faxes attached to an Asterisk. Fax - SPA2102 - Asterisk. 0851711201 and 0851711290 is on our WAN, no NAT. 0197673581 is outside our WAN and needs to be NAT'ed. Sending a fax from 0851711201 to 0851711290, no problem, switches to T38 and fax goes through. Sending a from 0197673581 to 0851711201, no problem as long as i dont enable T38 on 0197673581. But, if i enable T38

Hi, I am looking for an Mail-2-Fax and in a second step Fax-2-Mail-solution that works via T38 with Asterisk, currently still version 1.4 but it also should work with 1.6. For Mail-2-Fax I am thinking that you either have to install a special printer-driver on your Windows-PC (Mac and Linux would be good too), where you can print your fax too and where you have to enter the destination number.

Is it possible to force T38 for all invocations ReceiveFAX() ? Receiving fax always worked OK on Callweaver though I could put SipT38Switchover() into the dial plan. I can't with Digium fax, and it always fails at the point it decides to switch to T38.

I have already tried to contact to persons from Digium and I did not receive a response. I was wondering if there is any plan to support fully faxing in Asterisk, I.E.: A "T38 Gateway" of sorts.

How can I get asterisk to work with faxes in my configuration? I have a WAN with Asterisk at the centre and Mediatrix 1104 gateways at the end nodes providing tone to legacy PBX's and fax machines. The Asterisk is connected to the PSTN via a Digium single port t1. The end nodes are connected via frame-relay 128kbps links. I want to use g.729 between the end nodes and the Asterisk box at

Hi everyone, I have been trying to get T.38 Faxing to work with Iristel sip trunks for last few days but havn't been sccussful. I am using Asterisk 1.6.2.8 and SpanDSP 0.6. Here is what I see in the tcpdump capture: 1. Call come in from the trunk as regular voice call with g.711 codec 2. Asterisk answers the call and recognizes the CNG and sends the call to fax extension 3. Eventually

Hi all, I have a question regarding using T38 for fax sending and here is my scenario: fax -> SIP ATA (T38 enabled) -> Asterisk #1 -> IAX TRUNK -> Asterisk #2 -> SIP ATA (T38 enabled) -> fax My question is, how can I know if I'm really using T38? is T38 information coming to the other side (because of SIP to IAX conversion) or just plain g711a data? I'm using Linksys

Hi My call flow is T38 static IP gateway --> Asterisk --> Sip Provider--> PSTN Call is placed in reverse direction - from PSTN to T38 Gateway. T38 GW reinvites with T38, and asterisk passes it along to the SIP provider. The SIP provider challenges it and asterisk reponds to the Challenge with INVITE with Auth credentials...however, the Asterisk changes the SDP and replaces the T38

Hi all.. Im using ABE C3.2.1 version and here Im having the following issue with respect to T38 fax calls. Somehow asterisk when it receives Session modification request with the T38 Codec, is not forwarding the request to the other end. Also asterisk is responding with 200 Ok to this RE INVITE with an audio line rather an media line with image. The session id here strangely matches to that of

Using spandsp-0.0.6-pre17, SendFax on 1.6.1.18 and ReceiveFax on 1.6.2.8. Sip.conf on both sides has t38pt_udptl = yes. -- Executing [s at fax-tx-test:3] SendFAX("SIP/side-sip-00000009", "/var/spool/asterisk/fax/20091113_1455.tif") in new stack [Mar 20 17:05:34] WARNING[6433]: app_fax.c:178 phase_e_handler: Error transmitting fax. result=49: The call dropped

I have problem with fax machine Panasonic DX600. It's connected to Grandstream Handy Tone 386 which is connected to Asterisk. Asterisk is connected to my SIP provider. To some numbers I can't send FAX, and I get following error on CLI. WARNING[2237] chan_sip.c: Unknown SDP media type in offer: image 31358 udptl t38 I believe that Panasonic DX600 machine supports T38. And when I have

Hello List, I think I've discovered a little bug in t.38 bug in 1.6.0.22 regarding the speed (T38MaxBitRate) used to send the faxes. Asterisk always responds with a=T38MaxBitRate:2400. I've tried with Patton and Grandstream devices and the result is always the same. Patton ignores the parameter and sends the fax at 9600.

The scenario we have is fax send/recieve software that ONLY talks T38 and an asterisk box. We have ITSP providers that do NOT talk T38 but G711 only. Does asterisk have the capability to take the T38 call from an ATA or T38 software then bridge/transcode it and do G711 out to the PSTN providers? If not is there another product PAID or FREE software or hardware that can do this easily and

does asterisk support FAX t38 protocol? thanks

Hi, I'm trying to send faxes using Asterisk 1.4 and T38 with sip but Asterisk rejects the t38. Anybody know if is possible to transmit t38 fax with Asterisk 1.4? following settings: --- sip.conf --- [general] bindport=5060 bindaddr=0.0.0.0 disallow=all allow=ulaw allow=alaw context=from-outside t38pt_udptl=yes [operator] qualify=no nat=yes host=189.160.126.201 dtmfmode=rfc2833

Hi All, I have 1.4.9.1 setup, with the compiler flags enabled for T38, and have a Mediatrix 2102 and a Linksys SPA 8000-G1. I can pass faxes between devices but can't seem to invoke T38 pt UDPTL. It's enabled in sip.conf [general] and well as the [peer]. I get an error at the CLI: WARNING[3096]: chan_sip.c:14149 handle_request_invite: RTP re-invite after T38 session not handled yet !