similar to: outgoing works, incoming fails on asterisk passthrough to inter-tel

I tried to add a couple of SIP phones (polycom 601s) to my existing asterisk installation. I can successfully make a call from the SIP phone to any other phone (inside or outside), but I can not make any calls to a SIP phone. Attached are the pertinent parts of sip.conf and extensions.conf. The log starts off normal with: Mar 26 09:51:15 DEBUG[4885] chan_zap.c: DTMF digit: 2 on Zap/55-1 Mar

Hi All, i want to configure voice mail on Asterisk 1.4 for multiple users. let me explain you the scenario. i have 10 users with the name of 1000,2000,3000,4000,5000,6000,.......and these user can call to each other. Now i want to configure separate voice mail box for separate user. my extensions.conf ..... settings below.. [voicemail] exten => _X.,1,Dial(SIP/${EXTEN}) exten =>

I've been trying to figure out if it's possible to connect Asterisk to a parent Inter Tel Axxess system through the MGCP protocol. The archives for this list aren't searchable and I'm wondering if anyone has a simple answer... Dustin Moore

Hello - I have (finally) obtained a fair amount of success in connecting my Intertel Axxess PBX to an asterisk box via a T1 PRI. I can place calls from the Intertel side through the T1, out to an IAX2 softphone and the calls get routed correctly and all of the CID information stays intact. However, when I call from the IAX side to an extension which should route back through to the Intertel

I'm having trouble getting the manager interface to behave properly; specifically the Originate event. If I create an originate event as below, the calling phone will auto-answer (as it's supposed to) but the receiving phone never rings. It will timeout at 20 seconds. Action: Originate Channel: Local/201@from-sip2 Context: from-sip Extension: 154 Priority: 1 CallerID: John Doe

Hullo :) Can someone help me untangle a bit of a mess? I'm trying to set up a demo * server to show off how useful it can be to our business (as an IVR system and VoIP backup if our ISDN30s fail). I've not been able to get NT mode working with our InterTel Axxess PBX, so I've resorted to using normal TE mode and working on the basis the people dial one of the ISDN BRI extension

I have Asterisk running with a combination of SIP and H323 clients. I am using the OH323 module instead of the H323 one. When the SIP clients ring each other, they can hear a ringing noise in the ear peice to let them know that the other parties phone is ringing. However, when the H323 client rings a SIP client, there is no ringing sound at all, although as soon as the called party picks up the

Hi Guys, I am not so familiar with asterisk and hope to get help here. I am having now some stupid errors. My goal for the first, is to create a simple pbx with different context. As long as I use only the contex 'default' everything seems to work perfect. Now I tried to add another context i.e 'internal' and the asterisk is complaining for not finding the required extension in

I am trying to set up a Grandstream GXV-3000 Video phone to Asterisk ver 1.2.21.1. The problem I'm having is that it can call other SIP phones, but not vice versa. Can someone tell me where is the problem? TIA! Here's part of my configurations: ---------- sip.conf ---------- ; 113 is the Grandstream phone [113] type=friend username=113 secret=secret context=default dtmfmode = rfc2833

Hi list, We're trying to set up a phone number that customers can call to get a hold of anyone of a group of sysadmins (and not their voice mails!). We found the findme example ([1]) that makes the callees press 1 to accept the call. It almost works, but it doesn't work correctly when one of the callees, the sysadmins, hangs up after accepting the call. We're using this

Hi all, My office recently purchased an InterTel Axxess system with the IPRC card for VoIP. To our suprise, this card allows the InterTel endpoints and MGCP endpoints to work, but not SIP clients. I was really expecting to get a SIP softphone working with this setup, but that appears to require our vendor to sell us a SIP gateway and licenses at a not yet determined price. With this

Greetings all - I'm interested in using an asterisk box to supplement and add VoIP capabilities to our legacy InterTel Axxess PBX. After searching through the list archives and through google, it seems that the best way to go about this is to connect the two systems via a T1. Is this correct? The PBX currently doesn't have any VoIP capabilities, so that's not an option for

Hi! For demonstration purposes I try to bridge an incoming video call from a 3G mobile handset to another 3G mobile handset using asterisk as "switch". On the incoming call leg I see all expected bearer capabilities (Digital, 64k Transparent, G.7xx 384k video) but on the outgoing call leg the bearer capability G.7xx 384k video get lost and therefore the call is dropped from the mobile

Hi all, I'm running a stable Asterisk on a HP DL380G2 1.4Ghz 0,5GB RAM equipped with 1x TE410P and 2xJunghanns QuadBRI running in NT-mode. Connected to the BRI-Ports are 12 Fax-Modems (Elsa MicroLink ISDN/TL V.34) which are only operating in dial out analog mode to deliver fax messages. After a while of running fine (50-200 dial out connections) on some S0 spans the following message occurs

Hi All, i want to configure voice mail on Asterisk 1.4 for multiple users. let me explain you the scenario. i have 10 users with the name of 1000,2000,3000,4000,5000,6000,.......and these user can call to each other. Now i want to configure separate voice mail box for separate user. my extensions.conf ..... settings below.. [voicemail] exten => _X.,1,Dial(SIP/${EXTEN}) exten =>

Hi all, I just posted this question before last week. Meanwhile after upgrading Asterisk 1.0.7-BRIstuffed-0.2.0-RCg to 1.0.8-BRIstuffed-0.2.0-RCh the same problem occurs, but seems to be more seldom. Attached is now the output of "zap show channel" . - I'm running a stable Asterisk on a HP DL380G2 1.4Ghz 0,5GB RAM equipped with 1x TE410P and 2xJunghanns OctoBRI running in NT-mode.

I am currently a new asterisk user I have worked with the old rolm systems in the past. I have been asked to look around and find out how to do a few things in asterisk, either in asterisk itself or with third party software. The features that I am looking for are: 1. A good management application for setup and edit the .conf files for both the exten & voicemail. 2. A receptionist software

Hi all, this time with the complete configuration files... We need help with our SuSe9.2 asterisk box We have one QuadBRI and one TDM40B in an ASUS pundit R-2 barebone. We have downloaded the bristuff (0.2.0-RC7j) and installed it without problems. once we downloaded and compiled asterisk, zaptel and all other stuff, the module installation succed in this order: modprobe zaptel modprobe qozap

Hello... I have a big problem with asterisk. Every time i make a call asterisk does not bridge the zap channels. The zap channel from which i'm calling remains in state:ring and applicaton:dial and the zap channel with the external line configured remains in state:dialling an Application:AppDial. Zap/20-1 agentie s 1 Dialing AppDial (Outgoing Line) 09399 (None) Zap/9-1 int_omg 09399 5 Ring

Hi all, We need help with our SuSe9.2 asterisk box We have one QuadBRI and one TDM40B in an ASUS pundit R-2 barebone. We have downloaded the bristuff (0.2.0-RC7j) and installed it without problems. once we downloaded and compiled asterisk, zaptel and all other stuff, the module installation succed in this order: modprobe zaptel modprobe qozap modprobe wcfsx then the ztcfg output this: Zaptel