similar to: Sound breaking. Because of Tormenta2 PRI Interface Card or something else

Hi list, I have a asterisk box with an E400P that was running ok until last week. The machine just stop responding and after a reboot, the module (tor2) doesn't load anymore. anyone could help? regards Eduardo modprobe returns this: asterix:~# modprobe tor2 Zapata Telephony Interface Registered on major 196 Detected Tormenta 2 Quad T1/PRI or E1/PRA at 0xfe121800/0xfe121000 irq 7

Hi, After upgrading to new version of Asterisk and Zaptel, my Tormenta2 card has stopped working. Zaptel doesn't detect it. What should I do to make it work again. It is enabled in /etc/sysconfig/zaptel. Where else I have to enable it so zaptel can detect it and make it work. zaptel.conf and zapata.conf are the same as I had them before. I tried googling but couldn't find any help. --

Hello guys! I hope you bare with yet another newbie on the list! :-) I am trying to setup an asterisk installation in between a Siemens HiPath 3800 and my local carrier (Telefonica/Brazil). Both running R2. ISDN is not an option on the carrier. :-( I could apparently setup both E1s just fine according to zttool (both OK with no alarms) but, and this is where it starts to get

Ok. I just got a TDM10B and it is in with my X100P. So as it says in the provided instructions, I used the command modprobe tor2 I get an error message saying that there is no such device. My zaptel.conf looks like this: fxsks=1 fxoks=2 So I load the X100P first. (modprobe wcfxo) Then I load the TDM10B (modprobe tor2) Then I'm told that the device doesn't exist. Please help

Good day everyone, A Solution now exists for those of you still looking for the first model of Quad T1/E1 Interface Cards - the T400P and E400P. The T400P and E400P were manufactured by Digium until a few months ago, and were designed and released under the GNU Public License as the Tormenta II by Zapata Telephony. Varion, Inc. is now in full production manufacturing these boards. With the

(I'm producing a writeup on all the things one run into building an * box. Which after a couple of boxes is showing up aplenty.) So this uses the working h/w and config's from another box. All I do is build in a new computer. Loading the modules I got: __________________________________________________ Zaptel Configuration ====================== Channel map: Channel 01: FXS

I have an old zapata tormenta 2 quad port pci card. I'd like to get it working and play with it but was curious to see if that was possible. Does anyone know if it will work for 2.6 kernels, or where I can find decent drivers? I tried getting the tor driver from http://www.zapatatelephony.org/linux-zapata-current/ installed, but didn't get very far. Any input is appreciated.

I upgraded from Tormenta2 to Sangoma A101. I followed the instructions, and installation was successful. zttool, ztcfg, all show card is installed properly. I copied the parameters from my old working zaptel.conf, zapata.conf and zapata-auto.conf. Verified on Sangoma website that these files are correct. Also configured wanpipe1.conf. But doing all this didn't start the PRI channels. It says

Hi there, my * has no Zaptel or Tormenta hardware at all, also no ztdummy. However dmesg is full of Zapata Telephony Interface Registered on major 196 No ISA tormenta card found at d0000 Zapata Telephony Interface Unloaded and /var/log/messages shows tons of this: Nov 25 21:28:28 localhost kernel: Zapata Telephony Interface Registered on major 196 Nov 25 21:28:28 localhost kernel: No ISA

Hello there! I've problem with setting up unicall / mfcR2. can't find proper notation for channel, trying unicall/1, unicall/1/1001, unicall/g1, unicall/g1/1000 and still having no luck. klaudia*CLI> !cp call /var/spool/asterisk/outgoing -- Attempting call on Unicall/1001 for application Dial(363) (Retry 1) Mar 25 09:29:34 NOTICE[19920]: channel.c:2429 __ast_request_and_dial:

Hi, I have just begun working with TDMoE running between 2 fiber nics the dynamic span works great. In my main asterisk box's startup file I just 'modprobe tor2', then start asterisk. The zaptel, ztdynamic & ztd-eth modules all load by themselves when tor2 is loaded. If I stop asterisk then 'modprobe -r tor2' the tor2 module is removed but the other three remain. If I

Greetings, I have a quad port Tormenta 2 PCI card (uses the tor2 driver), which I have been successfully using for some time on an older, power-hungry Intel machine. I recently moved it to a newer machine with an Intel Atom D510 CPU in an effort to save on energy costs, but I cannot seem to get it to work there. Both machines are running Ubuntu 13.10 x64, with DAHDI support coming from the

Hello: I have a "Tormenta ISA Card, Rev. A" and wanted to know if somebody knows like integrating it with Asterisk. It would thank for any information on the matter. Thanks!!!! -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040907/df5cccd6/attachment.htm

Just installed Asterisk 1.2 on a brand new clean machine running RedHat 9.0. I have a TDM400 card inside. When I boot, the card seems dead. When I do: modprobe wctdm modprobe Zaptel the lights come on and all seems fine, until I reboot that is... After a reboot I have to repeat the modprobe. I shouldn't have to do a modprobe every re-boot should I? How do you get the drivers to load

Hello all After install the Asterisk, setup the configuration file in the sip.conf and extensions.conf and type "asterisk" with start program. I don't have line card yet. But I found following error in the /var/log/messages. localhost insmod: /lib/modules/2.4.18-5/misc/torisa.o: init_module: Input/output error localhost insmod: /lib/modules/2.4.18-5/misc/torisa.o: insmod

Hi everyone (Mark, Jim). I am new to the list but thanks to both Mark and Jim, I have being using "asterisk" since summer 2001. I am just updating my version that was a year old. Yes, I know, I got busy with other things like paying bills so I don't have to sleep with the dog anymore. Anyway, one of the frustrations I have been dealing with (keep in mind that my version of

Hi all, New user to asterisk having just got it compiled and installed. Running with no digium hardware (yet) and no soundcard in asterisk box. Problem is using the sample configs with a sip phone added as follows [2203] type=friend username=2203 secret=2203 host=dynamic defaultip=192.168.0.2 dtmfmode=inband canreinvite=yes the console on * when running with -vvvvc says :- (whenb trying to

Greetings fellow listers, I have an application where I have approximately 300 files that I playback individually or in blocks to simulate "text-to-speech" in a "less mechanical" voice than normal Allison files provide. These files are presently in GSM format and sound pretty good when I play them on my computer speakers or on my in-house

Hi, Some days ago I spent about US$700,00 in a Tormenta III board in www.govarion.com. I used credit card. I didn't receive any answer for my emails and there is no telephone number to contact them.. Now, I'd like to cancel this order, because I couldn?t wait so long, and my credit card was billed. Is www.govarion.com a fraud ???? Does anybody know something about them ?? Thanks.