similar to: Re: Linksys PAP2: calling tone stops after 5

Hi all, I have a problem with the dialing tone in PAP2: When making a call, I can hear the calling tone 5 times and then it stops. The called party still hears the call but not the calling party. I've playing around with different parameters on the PAP2 web config with no success until now. Anyone has seen the same probelm? Thanks, Jose

I have a handful of Linksys PAP2-NA's all talking nicely to Asterisk using standard telephones. I've been running them for the better part of this year. No complaints whatsoever. We chose the PAP2-NA's mainly due to cost and especially the ease of provisioning. In an effort to inexpensively bridge our office PBX (InterTel Axxess) to our VoIP network, we've opted to connect

Hi, I have 3 PAP2 connected to *, they work fine but there are some things which I would like to improve, some of them are: - double ring tone when placing a call (I hear two tones it seems like the PAP2 is generating it's own tone) - some kind of noise (like glitches or something) when I pick up the phone (seems like some polarity thing) - I'd like to keep the tone after

The best I can do so far (which appears to be a bit of a hack) is (<:0>S0), which says to add a '0' to the start of the string and dial immediately. This gives asterisk an extension dialled of '0', which isn't the 's' that i'd hoped for, but is a good start! (S0) by itself doesn't work, nor does (<:>S0). Any other suggestions? Thanks James >

Is there a way to configure the linksys pap2 to automatically connect to asterisk on lifting the handset (presumably into the 's' state)? Asterisk would then be listening for DTMF tones to figure out what to do rather than having to put a dial plan into each pap2. I think the pap2 is pretty much the same inside as a few of the sipura boxes so the same thing might work if anyone knows...

I am using my first PAP2 device from linksys. Used many polycom phones... I configured the PAP2 device with asterisk. I have the registration, thought I was good to go. Plugged in my Valcom 2924 public address analog connection, called the extension and I got busy... very strange I thought. I then looked at the status page of the PAP2 and it says the following Reg online and hook state OFF.

I've got a Linksys PAP2 on my Vonage account with unlimited usage, but my softphone-addon account only has 500 minutes. Anyone ever try to setup their * to mimick the Linksys PAP2 ? Any comments or suggestions on what problems I might run into if I try? -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, anyone can confirm if the Linksys's ATA and Router (PAP2-NA and RT31P2-NA) have the same limitation of just one G.729 call like the Cisco ATA 186 ? I'm testing both appliances here and found this issue but could not confirm this anywhere (nothing on the manual, no document or post from any user about this). In my tests they use G.729 only on the first call and G.711 on the

I had just found a Dlink DVG-1120 on ebay and I'm curious if anyone has used you it with asterisk. They were only $65. I have tested with the Linksys Pap2 and found that box to be fairly nice except for a lot of backgound/white noise. I was wondering if any else had experienced that? Let me know if I've wasted $65 on the Dlink and also if you had similar experience with white noise on

Has anybody else experienced problems with the Linksys PAP2-NA's? I've now had two of them fail unexpectedly, with no apparent rhyme or reason, having gone into a RED power LED, with a solid blue ethernet LED. No response from the device either on the network or from the phone.... To make matters even crazier, the one that now failed was the one I received as a replacement for the

Hi, I have a Linksys PAP2-NA connectd to my asterisk. I would like the device to add 2 characters in front of the dialled number always when it send the call to my asterisk. I dont know how to do that. I will summarise my requirement. My friend dials 1-210-1234345, i want the asterisk to get 55-1-210-1234345. Can someone help me to add this dialplan. Thanks in advance Dan -------------- next

Hi! Can I use my Linksys PAP2 with asterisk and an analog CLIP phone to show the Caller number on the phone. There's a "Caller ID Method:" option on Regional settings, but I tested all options, and my CLIP phone never shows the Caller number... :( Any idea?

I have a PAP2 with 2 phone ports. When I call them everything works fine until I hung up the call. There is about 30-40 seconds until I can call to that extension again. Before that it gives me busy messages. Extension config: exten => 199,1,Dial(SIP/199,30) exten => 199,102,Hangup Any suggestions? Thanks

My asterisk box doesn't recognize DTMF from my analog phone, plugged into my ATA(linksys pap2 version2). I can make/receive calls fine... it's just that, for example, I cannot login to my asterisk voicemail. Softphones (such as x-lite) are fine. I've turned up a few articles via google where some people have this trouble, but have not seen suggestions on how to fix. I presume

i have the problem in the hardware linksys pap2t, I am install asterisk with asterisk-gui and work fine but the hangup the phone (linksys pap2 t), no tone and sound like tu,tu, tu , tu , tu , tu , tuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu what is the problem with phone ??? add param special??? Note: i am mark number phone and wait ... sesonds and call. thank you. -------------- next

I run a bunch of the Linksys ATA's.. I always use rfc2833 for DTMF. works very well and have never had a problem with it. ..o-------------------------------------------------------o. Brian Fertig NOC/Network Engineer Planet Telecom, Inc. Tampa, FL Office -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of

Here is some info that may allow some "locked" PAP2 and PAP2-NA units to be used with Asterisk: I have a PAP2-NA (from a provider other than Vonage) for which I did not know the admin password, though the "user" pages were accessible to me. The provider had set it up to fetch at startup, its configuration file by HTTP from a numeric IP. It was running 2.0.10(LSc). A search

Hello, We use Asterisk with PAP2 and today we connected the FXS ports of PAP2 to CO ports of our Panasonic KX-TD1232. Problem is that Panasonic doesn't ring - that is doesn't ring every time the PAP2 is ringing. When we reset either Asterisk or the PAP2 it usually rings, but after couple of minutes it stops and only the automatic operator is answering - after 2 rings. We tried changing

Hi, Anybody lucky with this config inside an Asterisk server for dealing with FAX ? FXO_LINE ----> ASTERISK 1.4.2 ---> IAXMODEM ------> HYLAFAX TDM400P ZAPTEL 4.3.1 1 FXO port 1.41 ------------------------------------------------------------------------ I know Fax is not officially supported on TDM400P cards but I did not expect not being able of sending one

Has anyone made this work? For me everything is fine until I switch canreinvite form no to yes. What happens is that asterisk hangs on "attempting native bridge" ... from what I understand "attempting native bridge" means that the RTP is routed through asterisk (just without any codec translation) But it shouldn't do that ... right? ... canreinvite is set to yes ...