asterisk users - Jul 2005 - Linksys PAP2-NA failures...

Has anybody else experienced problems with the Linksys PAP2-NA's?

I've now had two of them fail unexpectedly, with no apparent rhyme or
reason, having gone into a RED power LED, with a solid blue ethernet
LED.  No response from the device either on the network or from the
phone....  To make matters even crazier, the one that now failed was the
one I received as a replacement for the previous dead one - and no, they
were never installed in the same location either....

Grrr....

Kris

I have found my PAP2-NA's to be picky about their DHCP server.  My PAP2-NA
appears to lockup if it is set for DHCP and the server is my Netgear RP614
Websafe router.  The fix for this is to unplug the ethernet from the unit,
plug in an analog handset, power it on, using the handset perform a factory
reset and then set it for static IP settings.

Craig

----- Original Message ----- 
From: "Kris Stark" <Kris.Stark@goDataflow.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users@lists.digium.com>
Sent: Wednesday, July 20, 2005 6:24 AM
Subject: [Asterisk-Users] Linksys PAP2-NA failures...

> Has anybody else experienced problems with the Linksys PAP2-NA's?
>
> I've now had two of them fail unexpectedly, with no apparent rhyme or
> reason, having gone into a RED power LED, with a solid blue ethernet
> LED.  No response from the device either on the network or from the
> phone....  To make matters even crazier, the one that now failed was the
> one I received as a replacement for the previous dead one - and no, they
> were never installed in the same location either....
>
> Grrr....
>
> Kris
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users