asterisk users - Oct 2006 - Linksys PAP2: calling tone stops after 5 tones

Hi all,

I have a problem with the dialing tone in PAP2:
When making a call, I can hear the calling tone 5 times and then it
stops. The called party still hears the call but not the calling
party.

I've playing around with different parameters on the PAP2 web config
with no success until now. Anyone has seen the same probelm?

Thanks,
Jose

Sunday, October 29, 2006, 10:00:22 PM, Jose Limeres wrote:
> I have a problem with the dialing tone in PAP2:
> When making a call, I can hear the calling tone 5 times and then it
> stops. The called party still hears the call but not the calling
> party.
> I've playing around with different parameters on the PAP2 web config
> with no success until now. Anyone has seen the same probelm?
You may have some mistake in dialplan of pap2. I have had the same
problem when I put || (two pipe) in dialplan of the line (in advanced
admin setting). In this situation the timeout depends on interdigit
short timer on regional settings tab.

-- 
Best regards,
 Csibra Gergo                            mailto:gergo@csibra.hu