similar to: VoIP GSM Gateways

Hi everybody I have installed a TrixBox with Asterisk 1.2.14 and relative upgreaded software. I Bristuffed it with last version of bristuff to use a Hemlet PCI ISDN CARD in a normal Italian EUROISDN installation. The * works fine except for the ISDN CARD. It is always Channel D down, but if a Call comes in, it works perfectly for some time, both inbound and outbound. It prompts Channel D UP!

Hello All * users. I have been looking for a way to allow GSM termination through Asterisk to occur. I am not a Telekom fundi and I have set up IAX2/IAX/SIP on asterisk with the ZAP channels via the Digium TDM 400P. I am unable to find any place that can tell me the cost of the VoiceBlue with a currency to I can calculate the cost of buying one. Alternativly - or just out of interist - I

Just a warring for everybody regarding this company. I emailed 2n.cz to buy 2 gateways to integrate 3g network and GSM with my asterisk box. They emailed me back to contact the local dealer for them. So I did and I bought the 3G analog gateway (bought from the local dealer) and BLUEVoice gateway(I bought it from a dealer in Serbia when I was there for a meeting) too. Having problems setting them

Hi, I have recently started a job as a system administrator, and as part of my responsibilities I have to look after an asterisk system. Quite impressed with it, but have one or two niggling issues. One of the last things my predecessor here did, was install a VoiceBlue mobile gateway unit, and though it seems to work ok, nearl 20 seconds pass from dialling a number to the call connecting, which

Searching through wiki and google. http://www.2n.cz/products/gsm_gateways/voip/voiceblue.html but there are also other products on the market. --- Wondering if its possible to connect as follows: Extension -> Asterisk -> ZyxelAnalogTelephoneAdapter -> GSM gateway. The best way would be to make the ZyxelAnalog.. to be a channel. But I don't think that is doable.. or ? ---- So i

Hi All, I am looking for a GSM VoIP gateway for use with Asterisk. I have come across VoiceBlue by 2N but it's price is beyond my reach. Are there any other alternatives out there? I've scanned across the mail achieves for an answer to this without much success, if the question has already been answered kindly point me to the resource. Allan.

I have successfully placed a call into and out of the card from Asterisk using vISDN. The current vISDN snapshot now contains the PCI id's for the card so no patching should be required. Most of the initial testing failure was due to misconfiguration of vISDN by me and a bad entry in my sip.conf resulting in one way audio. So I have established that at least 1 channel of 1 port works in TE

Dear Forum Members, I just purchased two VoiSmart GSM cards. Tried to install one of them on my Fedora Core 5 system, The compilation was not smooth, as expected, but after a small fix, it went through. Then I put two SIM cards in the card's slots. Then I loaded the modules. Then I started the Asterisk. After all I configured the vgsm.conf file according to my settings, that is just changed

Hi all, I've been working with * for a long time now, but only with analog FXS/FXO systems. I am venturing towards setting up a box in Germany now and I believe that requires a Fritz card? Do I even have to use the Fritz cards? Why not a Digium card.... We have 2 ISDN lines ( --> 6 handsets) so I'm guessing that will require 2 Fritz PCI cards (they have 1 port only). Then

Hello, I switched from my PSTN provider to a voip provider. (Voicedata in the Netherlands) >From the moment i switched all inbound calls are terminated after aproximatly 1 minute. The provider tells me it's not their issue since I have no other configuration than all their other users. What can I do. I removed all asterisk functionality by forwarding the inboud call directly to a local

Hi, I am trying to setup a GSM-Card for Asterisk. I currently use a "vgsm I" from voismart (http://www.voismart.it/) but the driver is very bad (compile-problems and no echo cancellation). Is there anybody out there who can recommend me another piece of hardware (pci card)? I need 1 or better 4 gsm-ports. Should be stable and have an echo cancelltaion feature. And of course it

Hi, I have a strange problem on some isdn modem channels. (* 1.0.9 / chan_modem / 2xHFC-S cards). Everything works fine but when the 2nd (and 3rd etc..) call comes in and * answers and there is about a 1/2 second of sound from the previous call (ivr) before the sound from the new call is heard. It just sounds bad and is quite annoying. I am assuming this is sound that is still in a buffer

Hi all I don't manage to get asterisk 1.2.5 or 1.2.6 running with the zaphfc driver.... The scripts from junghanns.net do download a very old libpri and asterisk version which is too buggy for me to use. Isn't there an acutal patch to get zaphfc support in *? -Benoit-

Because the VoiceBlue is only 4 channels and I am supporting 100 cell users, I needed a way to overflow calls to the PRI of all 4 channels are full. Unfortunately, there seems to be no built-in mechanism to determine if the gateway is full, so this script parses the output of "asterisk -rx sip show channels XXX.XXX.XXX.XXX" to determine the number of channels currently in use. Hope this

I may have found a source of an A-Ticked HFC 4BRI PCI adapter in Australia, and will be testing one next week if all goes well. I don't want to post the details of the reseller online unless invited to do so, so if nobody replies and says they are interested then I won't :) I'll follow up once I've tested it. Let me know if you want the details. James

Hi: Say I want to build an IVR application which sends an SMS message to a mobile telephone when the caller responds to a prompt in certain way. I think I can manage the part about generating the message and building something to actually send it. The part I'm foggy about is: how would I actually get the SMS message to the carrier? Discussions with the carrier have led absolutely nowhere

Hi all, I am probably missing something ultimately obvious, but I have a problem configuring freepbx... Using Edgy Eft with the cvs freePBX 2.2.1 and followed the Ubuntu installation guide on freepbx.org. System pxe-boots from a server with NFS root on same Using * 1.2 current (from source, not .deb's) Using mISDN-streams (from source, not .deb's) Using freePBX-2.2.1 (from source, not

Hi.., we have two asterisk server interconnected to each other through IAX2 trunk in two separate office. with this bellow configuration do we need to have Licensing for using G729 codec???? Office A --------T1 ----- Astrisk TE05P----------------IAX2----------------Astrisk Box -2 | |

Simple as that please email me direct. voipviews@gmail.com Also looking for a U.S. DID provider as well as orig provider.

I'm trying to use a Teles (netjet) ISDN BRI card with asterisk 1.2.9.1 Anyone was able to use this card with asterisk? I couldn't find much information about it. Any help?