similar to: Linksys PAP2 dial plan help please

Hi all, I have a problem with the dialing tone in PAP2: When making a call, I can hear the calling tone 5 times and then it stops. The called party still hears the call but not the calling party. I've playing around with different parameters on the PAP2 web config with no success until now. Anyone has seen the same probelm? Thanks, Jose

Hey guys, just thought I'd let you know that I'm giving away a copy of "TrixBox Made Easy" on The Asterisk Blog <http://www.asteriskblog.com>. Check it out. -- www.AsteriskBlog.com Your home for easy to learn Asterisk stuff. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I have a queue with one agent added using AddQueueMember (FAO|Local/1001 at from-sip|0||Agent/602). My extensions.conf is [general] static=yes writeprotect=yes autofallthrough=no clearglobalvars=no priorityjumping=no [from-sip] exten => 100001000,1,Dial(SIP/100001000,,t) exten => 1001,1,Dial(SIP/1001,,t) exten => 1002,1,Dial(SIP/1002,,t) exten => 1003,1,Dial(SIP/1003,,t) exten

Hello I have just set up Asterisk Asterisk 1.4.21.2 on a CentOS 5.2 machine. I am using the OpenVox B200P ISDN card. My problem is that even though chan_misdn module seems to be loaded correctly with Asterisk (I can see it using 'module show' command) the misdn commands are not available to me in the CLI so I cannot tell if my box is correctly interfacing with the ISDN card Any ideas

Good Afternoon, Can someone please explain what Y-cords are available out there and how they can be used with Aastra or other VoIP phones? Maybe with or WITHOUT headsets? Isn't a Y-cord traded for soft Barge in these days? Thanks, Bruce -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I have 3 PAP2 connected to *, they work fine but there are some things which I would like to improve, some of them are: - double ring tone when placing a call (I hear two tones it seems like the PAP2 is generating it's own tone) - some kind of noise (like glitches or something) when I pick up the phone (seems like some polarity thing) - I'd like to keep the tone after

The best I can do so far (which appears to be a bit of a hack) is (<:0>S0), which says to add a '0' to the start of the string and dial immediately. This gives asterisk an extension dialled of '0', which isn't the 's' that i'd hoped for, but is a good start! (S0) by itself doesn't work, nor does (<:>S0). Any other suggestions? Thanks James >

Hi, anyone can confirm if the Linksys's ATA and Router (PAP2-NA and RT31P2-NA) have the same limitation of just one G.729 call like the Cisco ATA 186 ? I'm testing both appliances here and found this issue but could not confirm this anywhere (nothing on the manual, no document or post from any user about this). In my tests they use G.729 only on the first call and G.711 on the

Hi all, I've got a device that seems to become unreachable for about 2 minutes, every hour. From what I can tell, it isn't due to network or server issues. Any ideas? TIA. -- Mike Diehl Diehlnet Communications, LLC. Voice: (505) 903-5700 Fax: (505) 903-5701

Has anybody else experienced problems with the Linksys PAP2-NA's? I've now had two of them fail unexpectedly, with no apparent rhyme or reason, having gone into a RED power LED, with a solid blue ethernet LED. No response from the device either on the network or from the phone.... To make matters even crazier, the one that now failed was the one I received as a replacement for the

Hello asterisk-users, My SIP phones are in pickupgroup, and if some of them ringing from other phone can pick up with *8 as usual. But I want to know if this happen. I've tried the a extension, but seems not working. Any other idea? -- Best regards, Gergo mailto:csibra at gmail.com

Is there a way to configure the linksys pap2 to automatically connect to asterisk on lifting the handset (presumably into the 's' state)? Asterisk would then be listening for DTMF tones to figure out what to do rather than having to put a dial plan into each pap2. I think the pap2 is pretty much the same inside as a few of the sipura boxes so the same thing might work if anyone knows...

I've got a Linksys PAP2 on my Vonage account with unlimited usage, but my softphone-addon account only has 500 minutes. Anyone ever try to setup their * to mimick the Linksys PAP2 ? Any comments or suggestions on what problems I might run into if I try? -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, With the gamut of FXO cards out there, I'm looking for a recommendation for home use. I have a nicely working Asterisk 1.4 system that just requires an FXO card to connect my NTL PSTN to it. My previous X101P clone seems to have kicked the bucket. Any suggestions would be greatly appreciated. Regards Kyle -- Kyle Gordon kyle@lodge.glasgownet.com http://lodge.glasgownet.com

I am using my first PAP2 device from linksys. Used many polycom phones... I configured the PAP2 device with asterisk. I have the registration, thought I was good to go. Plugged in my Valcom 2924 public address analog connection, called the extension and I got busy... very strange I thought. I then looked at the status page of the PAP2 and it says the following Reg online and hook state OFF.

I had just found a Dlink DVG-1120 on ebay and I'm curious if anyone has used you it with asterisk. They were only $65. I have tested with the Linksys Pap2 and found that box to be fairly nice except for a lot of backgound/white noise. I was wondering if any else had experienced that? Let me know if I've wasted $65 on the Dlink and also if you had similar experience with white noise on

Hi! Can I use my Linksys PAP2 with asterisk and an analog CLIP phone to show the Caller number on the phone. There's a "Caller ID Method:" option on Regional settings, but I tested all options, and my CLIP phone never shows the Caller number... :( Any idea?

I have a PAP2 with 2 phone ports. When I call them everything works fine until I hung up the call. There is about 30-40 seconds until I can call to that extension again. Before that it gives me busy messages. Extension config: exten => 199,1,Dial(SIP/199,30) exten => 199,102,Hangup Any suggestions? Thanks

My asterisk box doesn't recognize DTMF from my analog phone, plugged into my ATA(linksys pap2 version2). I can make/receive calls fine... it's just that, for example, I cannot login to my asterisk voicemail. Softphones (such as x-lite) are fine. I've turned up a few articles via google where some people have this trouble, but have not seen suggestions on how to fix. I presume

I've read alot of comments on the SPA-3000, many if not all saying they had echo issues, but I've not seen anyone comment on the SPA-3102. Does anyone have any comments or issues with these? Tim