similar to: NFAS Not Passing Audio on B-chan 48,72,96

Hi list, Ive got a server with 6 ports on it (4+2 port card) we have a DS3 delivering all voice DS1's to us. Carrier has a trunkgroup for the first 8 span (we only have the first 6 plugged in right now). Everything works fine until we fail the primary D channel (D's are on 24,48) the secondary then picks up and outbound calls do not work, if we reboot Asterisk the D on 48 comes up and it

Please help me test my setup by dialing 800.564.0215 and listen to the queue for a bit. I have a quad port T1 with NFAS setup. I can dial-out but I cannot dial any 800 numbers (Global Crossing says I need LDS service and that will be a couple weeks) so I cant test it myself. I need at least 24 callers to feel comfortable enough that it is working properly. Thanks, Steve Totaro

Hello, I'm running Asterisk@home 2.5 asterisk 1.2.4 zapatel 1.2.2 libpri 1.2.2 on a Dell Poweredge 2850 (1 CPU) with a TE210P I have 2 t1 circuits using NFAS with dchan on 24 and no backup dchan. I am able to receive inbound calls on all channels and can only make outbound calls on channels 25-48. Attempting to make an outbound call on channels 1-23 results in congestion.

We have integrated an Asterisk (TE110P) and a Mitel SX200. We usually get over 500 frame errors and over a 500 slip errors per hour. When the errors reach 1000 per hour the Mitel will take it's T1 card offline. At that point no calls can be routed from the Asterisk server to the Mitel and the TE110P reports a Yellow alarm. What can be causing all these Frame and Slip errors? We have been

Hi, I'm a lab manager / supervisor at our labs. We've had Asterisk in use for over a year directly hooked to the PSTN - a no brainer for configuration (although I had to fix some AT&T specific things in libpri). Right now I have two big challenges. One is to hook our box up lineside to a Lucent Definity G3R. Avaya is chasing this from their end, but we had the highest level of

Can T400P be configured for nfas (one d-channel providing signaling for more than one span)? Thank you. Alex Zarubin -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030522/f2b637a9/attachment.htm

Does anyone have a working NFAS config for Zapata and zaptel for 2 NFAS trunks? First two DS1s on tg 1 and other two on tg2? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050825/95961694/attachment.htm

We've been working for the past 2 weeks to get a new V400P working with our PRIs from the telephone company. We're trying to get the Asterisk server setup as a VoIP gateway for SIP and AIX. We can make SIP-SIP calls, but all calls from or to the PRI fail. This is the applicable entries from the Asterisk log (configuration files follow) for a call coming from the PSTN on the PRI. I

Any ideas? Sangoma support is closed for the evening. I have the latest Sangoma drivers and Asterisk 1.4 everything installed. When I fire up asterisk, I keep getting "Primary D-Channel on span 1 up" repeated over and over. The B channels never come up. There are no errors in any of the logs, zttool, or the wanpipe tools. Intense pri debug output: < Unnumbered frame: < SAPI:

I have a T3 coming from my carrier. From there I want to use an Adtran mx2800 T1 Mux to break the T3 into 28 T1/PRI which feed into seven quad T1/PRI equipped servers. Everything seems very straight forward with the exception of the D channels for the T1/PRI. I am not very familiar with large circuits such as T3s. I know that I can use one D channel per set of quad port on each server. So if

I have searched google and came up with too many options and packages that may or may not work for my needs, most articles seem to be for setting up routers. Maybe someone on the list can give me some better insight. I have monitoring turned on my "shift eight (tm)" (Asterisk ;-)) box for all calls. We have over one hundred agents and tons of recordings in wav format. I also

I have a bit of a weird problem that I'm having great trouble debugging. I have a TDM400P PCI card with two FXO and two FXS modules. Both FXO modules are connected to BT lines here in the UK. Both BT lines have V23 Caller-ID, which works fine with Asterisk. Both asterisk and zaptel are fresh from CVS. Both FXO modules (channels 3 and 4) are in "group 1" for outgoing calls. My

Hi there, Here is my dilema. I have a new small business customer that wants me to put in a VoIP phone system for them. Based on their requirements, I have determined that it needs to be a "set it and forget it" type of thing like a lot of small business proprietary systems. At the same time they would like to be able to do minor dial plan changes themselves so I have determine

Hello team; While am aware and active user of astersk monitor function for recording, i would like to know if i can use asterisk as a pure recording server(like nice or witness) for some other PABX's extensions (both inbound, outbound and internal). Setup PSTN---Legacy PABX(with analogy n digital extensions)--- asterisk(record Legacy PABX extensions.) Sam -------------- next part

Dear, is any way to change , the size of voice packets? I want to increase the quality by decreasing the size of each packets, because of bandwidth failure. ? thanks in advance Mani -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081110/c1b2ed9d/attachment.htm

Does anyone have a good list of links to the various presentations at Astricon, specifically one including a link to the performance analysis by those guys from Belgium? I would love to get a closer look at their graphs because it was impossible to read them, and I was pretty close to the front! -- Kristian Kielhofner

While not strictly Asterisk related this issue could certainly affect some of you: http://blog.krisk.org/2013/02/packets-of-death.html -- Kristian Kielhofner

I am running Asterisk 1.6.2.17.2 with a Openvox A400 card with 2FXO/2FXS modules. I'm trying to set-up things to route analog fax calls from a FXO port to an analog fax machine on a FXS port on the same card. Outgoing faxes work just fine. But incoming faces are routed to the right DAHDI extension, but the call dropped right as the fax machine rings for the first time. The fax machine

Hey, I am here at Astricon and about to go down to registration. Is there any interest in pictures if I take my digital camera? I am sure that someone is already doing this. (Probably someone official). I would take pictures of each day and upload them to my website if anyone is interested. Let me know! -- Kristian Kielhofner

Hello everyone, I just ordered one of these: http://www.marvell.com/products/embedded_processors/developer/kirkwood/sheevaplug.jsp Just over $110 with shipping but they are expecting the price to come down quite a bit: - 1.2Ghz ARM5 - 512MB RAM - Multiple flash storage options - Gigabit ethernet - USB 2.0 - 5 watt power usage They probably won't be shipping until late March but I