similar to: Kirk IP600 V3 DECT Wireless server

Hi list! Is anyone using the Kirk IP600/3 with SIP firmware connected to Asterisk? Any experiences / caveats? If anyone would be willing to share the dump of their IP600 config file, i would really appreciate it. Is there anything special i should put in my asterisk config? Thanks !!! Remco

I'm going to try, Thanks very much Giordano -----Messaggio originale----- Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Remco Barende Inviato: luned? 30 gennaio 2006 20.04 A: Asterisk Users Mailing List - Non-Commercial Discussion Oggetto: Re: [Asterisk-Users] Kirk IP600 Hi! Yes, it works (sort of) but I still have some issues.

Hello, I had had some echo issues. I purchased a digium echo canceling card, and the echo issue seems to be reduced but not eliminated as I hoped it would be. I currently have it set to 128 'yes'. I've tried 256, but when I try 256 what happens is that instead of getting better echo canceling I get AWEFUL echo. Can anyone enlighten me? I am running 1.2.6 with a 4 port PRI card.

Hi List! Does anyone have experience setting up this beast with Asterisk using Skiny/SCCP? I know that somebody on the list managed to get it working with H32H but in this setup it's not possible to transfer calls, quite annoying. I tried to set it up using the Cisco protol. With Skinny the phones register properly at * but I cannot get a handset to ring on an incoming call. The calling

Hi all, has anyone tryied to configure asterisk with Kirk IP600 Dect-IP gateway? Could it works using the skinny channel ? Thanks Giordano -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060130/07ec3c90/attachment.htm

Hi, I just got some interesting information from Kirk Telecom (www.kirktelecom.com). This company has been in the business of providing DECT solutions (IP gateway, base stations, repeaters and handsets) either to be used with Cisco CallManager (SCCP protocol) or with the Innovaphone IP PBX system (H.323). Two important elements: 1. It seems they foresee a SIP version of their product in Q1

Anybody tried one with Asterisk yet ? Views ? Best Regards, -- This message has been scanned for viruses and dangerous content and is believed to be clean. SplatNIX IT Services :: Innovation through collaboration

Hi All I am having a problem setting the outbound callerid number on a PRI E1 in South Africa. The outbound number keeps on appearing as the main PRI number. How does it work between Asterisk and the Telko? More importantly how do I get it working? Kind Regards Garth -- Garth van Sittert BSc (Physics & Computer Science) ----------------- Mobile: +27 (0)83 791 6662 Email:

Hello everyone, this is my first post to the list, so hello again. We're a small company in Romania and we're trying to set up a really small version of "call center". That is, we want to get a few land-lines from our telco in different countys and "bridge" all calls to our HQ, in order to make it cheeper for our clients to call us. Unfortunatelly there's no ISP

Hi, I am trying to send "404 Not found" reply, without any luck with the following: exten => 555,1,Playback(you-dialed-wrong-number,noanswer) exten => 555,n,Playback(check-number-dial-again,noanswer) exten => 555,n,Congestion() However the above results in "500 Service Unavailable" being send out. What would be the correct application/function to generate "404

I am trying to set up a linux based faxing solution for a client, and have found that the modem they have (ancient dataplex external unit) just isn't up to the job. It talks to some remote fax machines but not others. A new external modem ranges from AUD$75 to AUD$400, which got me thinking of other possibilities... #1 FXO PCI card (more expensive for 1 port, probably cheaper for 2+) #2

In the list I found some messages that *8 doesn't work so well. Is there any possibility to create a extention that you can call, and if you are fast enough, pick up a number? (Also if you are outside your callgroup) like pseudo code: exten => 888, 1, EnterPhoneNumber() exten => 888, 2, EnterPass() exten => 888, 3, TransferCallToThisPhone() exten => 888, 103, Invalid()

Have a strange problem... When a C7960 calls the Polycom ip600, the ip600's first line button blinks, the ip600 display shows the proper callerid, but the phone does not ring at all. If I call the same ip600 from a bt102, the ip600 rings properly. If I call the same ip600 from another C7960, the ip600 rings properly. All phones and asterisk are on the same lan within a few feet. The

As the subject line says: Is PING a good indicator of network latency? If not, how can I measure latency? Thanks, Cosmin Prund

Sip to sip calls are fine, both local on Asterisk and over a SIP gateway, however some people who call on the PSTN line say we are very queit and vice versa, can the volume be turned up on the PSTN line? The volume buttons on the VoIP phones only turns up the others voice, so this is a fix for us, but how do I make our voices louder for the people on the PSTN line? Thanks. Paul.

Hi list! I'm trying to configure the Kirk IP 600 wireless (DECT) system. The wireless phones are regular DECT phones, the Kirk IP 600 is doing the voip part by registering/gatewaying the phones to a callmanager server. The phones do not work and I think the problem is that they do not register at asterisk but I'm not sure because I don't understand a thing of the sccp/skinny

Breeze to set up, too. To monitor and transfer to SIP/1000 / ext 1000: 1. Insert exten => 1000,hint,SIP/1000 into your default context (the context the extension is in) 2. In the monitoring phone's web interface, click Function Keys, pick a key, change it to Destination and type in SIP/1000. Once you submit the form it will change to a SIP URL, that's OK. 3. There is no step 3.

Hi, I need to subscribe and use several Polycom-Kirk 5020 handsets along non-Polycom-Kirk handsets on a one-cell Polycom-Kirk 600/3 base station. Has anyone tried this ? Which values did you pick for Subscription mode (with or without Account Code) and IPEI ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi! I have two, not too related questions: - the probably simpler one: if anyone can help me out using a Cisco 7905G with chan_sccp? I did already managed to get it working with a SIP image, I'd just like to see it work with this one as well. It's probably something I screw up with the configuration, as the phone registers, only I don't get any lines with it, although I have it

Hi, I'm testing a Polycom IP600. With firmware version 1.1 the phone reboots at any time. With firmware version 1.2, the first reboot was an endless reboot. Then I moved the phone to another lan port, then it worked fine. Then I installed again in the initial lan port and the phone works well. However after some time of inactivity (1 hour?), the IP600 stops to send and receive calls.