similar to: Printer Registry

Hello List, sorry, that I have to repost my question a third time (last postings on June 23.), but unfortunately my problem remains unsolved. Here we go again: In short: I can print from any application except wine. My systems (first try): Workstation ray (192.168.99.10): Gentoo 2006.0 wine-0.9.15 Cups-1.1.23 no /etc/printcap no local printer connected /etc/cups/client.conf contains the line:

Well, I thought I had the problem solved. Ported everything over to PJSip and build RDNS records for the phones and the server, but I am still experiencing the problem on incoming calls. ** On 6/7/2016 1:00 PM, Faheem Muhammad wrote: > I've faced the same issue. The issue was related to DNS, the reverse > lookup query failure caused the delay around(7-9 seconds). The purpose >

I am having an issue with a couple of phones where they ring, but there is a long delay after the phone is picked up before the audio starts. My setup: * Server running Asterisk 13.9.1, Dahdi 2.11.1 w/ OSLEC * Server is CentOS 7 * Quad core CPU with 16GB Ram * 2 Snom 300 phones. * NO NAT. Server and phone are on the same subnet with only a gigabit switch between them. * Digium

We're deploying an asterisk-based phone system at all of our branch offices in an effort to eliminate long-distance costs incurred from the constant branch to branch calls. We're using the Snom 300's at all offices for the desk phones and X100P cards to interface to 2 analog lines. I'm having a problem tuning all the echo out of the system. So far two branches are using the

I'm having an issue with some Snom 300s on a server running Asterisk version 13.9.1, Dahdi 2.11.1 w/OSLEC and pjsip 2.5.1. There is _*NO NAT*_ involved. Phones and server are plugged into the same network switch, all on the same IP range. The server is running a Wildcard AEX410 analog card with 2 FXO modules receiving incoming analog lines. Occasionally, in the middle of a call, the

Is there any possibility of DAHDI supporting Automatic gain control on TDM ports? I'm having issues at a couple of offices where calls made to local numbers are fine but a when a calls from or goes to a large percentage of long-distance or 1-800 numbers the person at the remote end cannot hear the person in my office. Boosting the gains in zapata.conf (I'm still using 1.4.21) to 8

I've got multiple satellite office all linked back to the main office via VPN. Each office has their own asterisk server which registers back to the main office's Asterisk server. Each office also has a 1Mb downstream / 384k - 768k upstream connection. The branches are using Speex for their connections back to the main office. The issue I'm having is that there are times that

I would like to hire someone to help us tweak our asterisk system for Snom phones. We would like to enable things like: One touch recording One touch park orbits Presence Please contact off-list if you will be able to help. Thermal -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have several branch offices, each with their own Asterisk server (version 1.4.22.1) handling their PBX functions. All of these offices need to talk to each other. In sip.conf I created a peer entry for each office with a username of branch-user and a friend entry for every branch-user with the username being just the branch, for example: [Office2] username=Office1-user host=10.10.80.253

I'm having a major problem at one of my branch offices with "Phantom Rings" on their asterisk-based phone system. The system was originally built using 2 X100P cards and was recently upgraded to a Rhino R4FXO-EC card. The upgrade severely increased the frequency of the phantom rings. I've read everything I can find on-line about automatic testing and noise on the line and

If I have a global variable in my dialplan and I change it, does that change immediately take affect for all calls that are active? Here is my situation. The company I work for has two office groups that share a building. The two offices are separate companies but support one another and want to be able to transfer calls as if they were all on the same phone system. Each company has 4

I am using Ubuntu Hardy, using the latest release of wine from the wine repos. I have an nVidia 7600GT with 256MB of video memory. One windows game i installed, Medal of Honor Allied Assault, has a simple config utility that sets game settings based on your hardware. This utility is detecting only 64MB of video memory. I tried setting it using wine regedit, HKCU>Software>Wine>Direct3d

I'm having an unusual problem at one of my branch offices. Every now and then they will make a call and the person they call is unable to hear them, but they are able to hear the person. The Asterisk server has only one ethernet interface and is on the same physical network as the 2 snom 300 phones and is connected to the PSTN lines with a Rhino R4FXO-EC card. Usually hanging up and

Hello. I'm trying to find wine that can make use of DGA (with new Linux distros like my Debian 4.0). I need it because I want to run Fallout 2 with acceptable speed - right now it is unplayable (without DGA). So far I tested wine 0.9.15 and some above - and no luck. I guess I should look for older Wine but which one exactly? Thanks in advance and sorry for my English. -------------- next

I'm trying to get Wine to print through it's PS driver, without success, on a HP DeskJet 694C, configured on Linux with the cdj670 driver. What I get to see on screen after I attempt to print are three windows with exclamation marks on a yellow triangle and garbled text. The first window is titled "Printer name", the second "Device name", the third "Output".

Trying to get one Samba server to serve several printers through CUPS and host a virtual PDF "printer" at the same time. I've gotten them working separately, but not together, and I think I know why. In the smb.conf man page under "print command": "With printing = cups, and if SAMBA is compiled against libcups, any manually set print command will be ignored."

I think I have my echo problem solved, now i need to tackle the MWI. I can't seem to get it to light up. I'm using Asterisk 1.4.14. Here's a section from my sip.conf for my test phone: [general] context=internal allowguest=no allowoverlap=no allowtransfer=yes notifyhold=yes bindport=5060 bindaddr=0.0.0.0 srvlookup=yes pedantic=yes vmexten=9998 at internal ;vmexten=*97

If I have an application running under wine, and it, in turn, calls a system command, could it call that command in the Linux format, or would the command be spawned in "wine space" for lack of a better term? I'm trying to solve a printing problem where my application cannot correctly print TIF files under wine due to errors in the way the database framework it's built on

Still grasping at straws trying to solve DTMF detection issues with one of my asterisk servers. This particular server is now running Asterisk 1.4.18.1 and Zaptel 1.4.9.2 in runlevel 3 (console only) with 2 X100P cards. I have tried adjusting channel gains, turning call progress and relaxdtmf on and off, switching echo cancelers, just about everything that Google turns up and I can't

I need some help. I'm trying to work with the registry by following this guide: http://wiki.winehq.org/UsefulRegistryKeys I am missing quite a few keys. I no it says you can add them and set the values but I havent a clue as to whether or not im doing it correctly. The whole reason im doing this is so i can get winamp to play music. I keep getting "Device not found. Please select