similar to: app_sms not working anymore

Ok, I just thought I'd publicly pat Adrian Kennard (revk) on the back for this application. This is an excellent contribution and gets my vote for app of the year. For those that aren't aware app_sms allows you to send/receive fixed line sms messages from asterisk. ( you can take a look at a quick page showing this http://www.automated.it/asterisk/sms.html ).. I should point out that

Hi, i've been discovering app_sms and it states that it can act as an smsc for landline sms. Receiving SMS from my Gigaset Phones is no problem and the SMS are stored as files on by * box. So far so good. Let us assume that i have a couple of phones which should be able to receive SMS directly from my * box ( and not from an SMSC from BT or Deutsche Telekom ), So all these phones have

Hello, i try to send out a sms, but with no success. The trunk is a E100P, and the sms should go out to the Telekom SM-SC. What i want to to at the first run is, sending out a sms when a certain number is dialed. I tried: In extensions.conf: exten => 35953,1,SMS(${TRUNK}/9350193010,,0179NUMBER,"Hi there") exten => 35953,2,SMS(${TRUNK}/9350193010) exten => 35953,3,Hangup

Hi, ok, I've tried to understand the documentation... and I think it's just bypassing my brain completely... Can anyone offer any assistance... Here's what I'm attempting to do: a) 1. Create a text file in the correct format and put it in the sc-me.<exten> folder where <exten> is the phone extension. 2. Hoping that this would then be parsed and sent to my Panasonic

Is it possible to get a conf.-example? -----Urspr?ngliche Nachricht----- Von: Stefan Reuter [mailto:asterisk@stefan.de] Gesendet: Montag, 20. Dezember 2004 00:40 An: Asterisk Users Mailing List - Non-Commercial Discussion Betreff: Re: [Asterisk-Users] SMS - how to send one > > Um, sorry, but if SMS is not for sending to mobile phones, then what is it > > for (if it matters, I'm

while compiling svn 53132 of asterisk branch 1.2 gcc -pipe -Wall -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -g3 -Iinclude -I../include -D_REENTRANT -D_GNU_SOURCE -O6 -march=i586 -DZAPTEL_OPTIMIZATIONS -DBUSYDETECT_MARTIN -fomit-frame-pointer -fPIC -c -o app_sms.o app_sms.c gcc -shared -Xlinker -x -o app_sms.so app_sms.o make[1]: Leaving directory

Hi does anyone have a definitive list of countries other than those listed on the wiki which are supporting app_SMS on landlines using ETSI ES 201 912 ?? Thanks Tim Robinson Basingstoke, UK

Hiya, I've been doing some testing with SMS in Belgium (Belgacom), sending SMS seems to work fine. (with .call file and a context that handles the sending) The problem is however, receiving.. Hardware and software is quadBRI from Junghanns, bristuff RC8h (asterisk 1.0.8), Debian 3.1. For receiving SMS in asterisk, I am using: [custom-smsrx] exten => s/0171701,1,Verbose(Receiving SMS

A potential client wants to integrate cell phones into his PBX offering. Is anyone able to exchange messages between an * system and a mobile phone? Which gateway are you using and what are the charges? Do you use app_SMS? I know this can be done because I'm receiving spam SMS on my cell phone. Thanks, Mike

Hi, i've been trying to get fixed line sms working for some time now. Can anybody tell me, if he is actualy using this with asterisk in germany? I have followed the instructions found on voip-info. I was successful a couple of years ago with asterisk 1.0.7 and an normal telekom isdn line. Now i want fixed line sms over an Dokom PRI with Asterisk 1.2.9. Here in Germany the Materna

Hello, (I have asked it some time ago in Asterisk-es mailing list, so excuse me if anybody receive it twice.) I am trying to send SMS in Spain using landlines. It seems that app_sms.c only handles Protocol 1, but Spain and Italy are using Protocol 2. I have been searching in Internet without any results... anybody is sending SMS from Asterisk (or any method) using Protocol 2? (so, it seems,

Hi List, Recently I tried sending sms using app_sms (hardware TDM400P) in Singapore with land line telco provider singtel it worked fine and can send sms in Latin characters 7-bits/8-bits but I am unable to send Unicode (UCS-2 or 16-bits) sms in Arabic or Chinese. the problem is that my mobile show the message with invalid character I have managed to capture the outgoing sms data as following

Dear Sir, I'm trying to configure the SMS capabilities of my provider (Telecom Italia) with my asterisk. I tryed with a normal phone (SMSC number 42100) and all is working fine, incoming and outgoung SMS. Now I'm trying to configure my asterisk for support SMS, the incoming messages are working fine (incoming number 042111) dialplan match and SMS recived. I'm getting troubles in

hi there, I've been using sms a few months ago with * v1.0.9, but now I need it, so I'm testing it out again. But for some reason the SMS receiving doesn't work like it should. It receives the "call" from the telecom operator, and it starts the SMS application, but then i get the following error.. Any idea if this is due to bristuff or my implementation of SMS ? (I used

Does anyone have some decent Nagios scripts out there that do more than monitor the proc itself? Rather than reinvite the wheel, figured I'd ask. I already saw the one on the wiki. Matt

Hi all, I wanted to switch from my current setup (mISDN) to the native dahdi with b410p support (wcb4xp). All works fine for normal phone calls but not for faxing. Faxes are distorted, if arriving at all, and hylafax logs the usual bad stuff (HDLC frame not byte-oriented.) Our setup uses a digium b410p card with asterisk 1.6, latest libpri and dahdi, hylafax with iaxmodem, and all this on 1

hi, Just wanted to inform everyone, if you're using the latest bristuff's you might (depends on the country!) have hangup issues. The issue appears every time you dial an external number, and hangup after letting it ring for a few times. Then the remote party keeps ringing. In some situations (we only encountered this while dialing to other * servers) it keeps the line open on the

Hi all, I'm using openvpn to connect to a public server that has Samba v3.0.24 installed on Debian etch. The connection is over the internet (from a standard ADSL connection to a remote server on a 2Mbit LL). The problem is copying somewhat 'larger' files from the client to the server. Copying files of up to 2 megabyte goes well but larger files fail (4 MB, 6MB, or more). The error

Hi,lartc I used iproute-060110 with iptables1.3.4 on gentoo 2005r1 kernel 2.6.14-5. I find some error messages in system logfile: HTB: quantum of class 10001 is big. Consider r2q change. HTB: quantum of class 10010 is big. Consider r2q change. tcf_action_init_1: successfull police HTB: quantum of class 20001 is big. Consider r2q change. HTB: quantum of class 20020 is big. Consider

Hello! Is it possible to run Asterisk as a SMS Service Center and does it work over a directly connected ISDN (CAPI) interface card? Did anyone already use Asterisk for that? Roland Zagler mailto:r.zagler@fog.at @fog smart partners