similar to: Dell PowerEdge 1650

Hi All Before I go out and buy a DELL PowerEdge 2850 has anyone had problems (or any other useful experience) getting a TE411P to work with it. I also have a legacy TE110P. Has anyone had problems with this combo. -- Dr. Rodney G. McDuff |Ex ignorantia ad sapientiam Manager, Strategic Technologies Group| Ex luce ad tenebras Information Technology Services | The

I too had a server room fry and need to replace h/w. So what specific Dell servers did/do you deploy? Where is the link w/Digium/s Dell caveats? I'm using the Digium TDM400 card w/* > Date: Thu, 13 Apr 2006 19:19:13 -0500 (CDT) > From: Aaron Daniel <amdtech@shsu.edu> > Subject: Re: [Asterisk-Users] Digium cards, so disappointing ! > To: Asterisk Users Mailing List -

We have a customer that has Asterisk 1.4.12.1, Zaptel 1.4.5.1, Asterisk-Addons 1.4.3. running on a Dell Poweredge 1900 server (Dual Core Xeon, 4gb RAM, 500gb Raid 5). Until a month ago they had two TE120P cards and everything was working fine. Since they needed to add a third E1 line we decided to change one of the TE120P cards with a TE210P. After the change we had a couple of crashes (server

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I am stuck in a situation where I have two te110p's and really need a te210P. Anyone interested in a trade? They are in working condition guaranteed. If this is the wrong forum for this, I am sorry... I will take it off list. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (MingW32) Comment: Using GnuPG with Thunderbird -

Can anyone comment or share experences with using Dell 2850's with Asterisk. Proposed config is 2850, 2 x 3.6g procs, 2 g's of ram, 4 x 36g 15k rpm drives raid 10, Digium TE411P ( the echo cancelling cards ). Expected load is 1 or 2 pri's (most likely 1 ) 100 Polycom phones on the local network, 15 phone on a remote T1. 6 phone remote via the internet using IAX, Voicemail for

OK... maybe I got a little anxious and ran out and bought a Tyan GX28 with dual Opteron (dual core) processors. (It is a nice server ;) ) I did neglect to find out that you can not manually set the IRQ's on this motherboard. I am now stuck sharing an IRQ with the ethernet controller and no foreseeable end to my dilemma. I have a Digium TE210P and zttest consistently runs at 99.97% which

Hello, I'm just starting out with asterisk and I'm playing around with the system. Currently I have a Digium TE210P connected to a PRI on the Asterisk server. I have a SIP soft phone on my laptop for testing that is working fine. When I try to place a call from my soft phone I get this from Asterisk: May 1 09:11:41 NOTICE[20098]: app_dial.c:1029 dial_exec_full: Unable to create

I just implemented a system using a TE411P hardware echo cancellation card. Per Digium, I setup zaptel.conf, and zapata.conf the same way as I always have. To my surprise calls out to the PSTN had a terrible echo. 1 - 2 second delay, and quite clear. The echo was so bad that I had to remove the hardware echo cancellation module from the card. We are only using the 1st span of this card right

Hi, I found E400P quad PRI card quite cheap (749USD): http://www.govarion.com/product_info.php?cPath=1&products_id=2&osCsid=68cdd6e3d08754 in comparison to te410p (approx 1500 USD ) http://www.digium.com/index.php?menu=product_detail&category=hardware&product=TE410P Now newer generation with HW echo canceling emerged (te411p). I'm not sure in what things those two cards

I just wanted to see if any one else has seen this or could help point me in the right direction on this problem. I have a TE411P card in my * box. I am running FC4 x86_64. I used to have two TE110 cards in the same box that worked without any problems. Since changing to the TE411P cards, I am getting random DTMF tones being produced on a bridged connection through the same Channel Bank that I

Hi all, Our asterisk PBX, randomly restarts all the channels of the E1 connection. It sends this message "There is no D-Channel, using channel 16 anyway".Then the asteisk recive (or it thinks it recives) yellow alarms at all the B-channels, after that it restart all the channels. When restarting the B-channels it cut all the conversations that is handling at that moment. Does anyone

My TE411p does not seem to like to have two PRIs from different telcos (span 1 and span 2). I can get one working, but not the other. However, if I use vpmsupport=0 when loading the wct4xxp module, they both work. But here is the problem, vpmsupport=0 disables the on board echo cancellation. Any ideas? BTW, here is zaptel.conf span=1,1,0,esf,b8zs span=2,2,0,esf,b8zs bchan=1-23 dchan=24

[Cross-posted to the asterisk forums, so if it seems familiar...] My company is looking to implement 100% recording of inbound and outbound calls. We're pondering using Asterisk as a trunk-side monitoring system sitting between our Avaya Definity switch and our mixed bag of 6 T1 and PRI circuits. I've read with interest Matt Roth's thread on the Asterisk mailing list, however, since

Evening, My latest asterisk box is having a difficult problem. It is configured with one TE210P and TDM400P with four FXO modules. I'm running FC6. The TE210P only has a single PRI. When the system boots, it is completely random what order the zaptel modules will get loaded in. Sometimes zttool shows the FXO as the last span, sometimes as the first. When it does load as the first, which

Hi Guys, I need your recommendation which card to buy?The TE411P or TE406P do they have any difference?I check their brochures they are differ only when it comes to PCI slot voltages.Which card best to use?Btw,Il be using supermicro board with 3.3V and 5.5V?Will il be experiencing problem during the implementation later on if i choose the wrong PCI voltage options?Will it depends on

Hi all, 1. Just bought a new TE411P and about to install it replacing the existing TE410P. I am assuming I need to set echocancel=no and echocancelwhenbridged=no now that it will be done in hardware, correct? 2. Is there any way to monitor hardware echo cancellation to ensure it is working (apart from being on a call)? 3. The Digium webite says "By supporting 16ms with 128 channels or

Hello everyone. I have server with 2E1 PCI card, asterisk 1.4.35, dahdi 2.4.0, libpri 1.4.12-beta2. One PRI trunk looks to PSTN and take a clocksource from telco. Another trunk looks to PBX with DECT system. Some outgoing calls from asterisk to PSTN drops. The last message that exists before hanging up process is: DEBUG[28467] channel.c: Got a FRAME_CONTROL (8) frame on channel DAHDI/... This

Hi list! I'm trying to setup a new * server with a TE210P in a Dell 2850 box. I'm using zaptel version 1.2.5, the linux flavour I'm using is CentOS 4. In a previous thread I read about the results I should expect from zttest. On my home box (using the crappy Asus A7V600) I got really bad results from zttest (just over 97.5) but I know that this motherboard just sucks. To my

I am getting ready to purchase my first Digium card to start experimenting with Asterisk. Before I make my purchase, I wanted to make sure I'm not going to have issues with these cards (need to see what the specs are on my box, 5V or 3.3V PCI ). I will be using Asterisk @ Home, so will be Asterisk v1.0.9. I took a quick poke at the lists, and it appears several people have been having

Every once in a while calls get interrupted with a brief silence followed by a DTMF tone on our T1 lines. We are using a TE411P card. It does not happen on SIP connections, just the T1. Has anyone experienced this or know a possible cause? Thanks, -Bill