similar to: Re: Can I enter an extension to dial whilevoicemail is playing?

I have a very, very simple Asterisk setup in my house. I have a Sipura 3000 with a PSTN line connected and one analog phone connected. The [incoming] context looks like this: exten => s,1,Dial(SIP/50,23,r) exten => s,2,VoiceMail(u50@default) exten => s,3,Playback(vm-goodbye) exten => s,4,Hangup As you can see, when somebody calls in if I don't answer in 23 seconds then they are

Hi! I am currently working on setting up an Asterisk system, and I was wondering if anyone has worked on an alternate mp3 player to mpg123. We have a library of MP3 files that we would like people to be able to select and play over the phone -- and this will require pause & resume, as well as fast forward / reverse (jump forward / jump back). It doesn't seem like mpg123 can do this. Is

We've been running an Asterisk-based phone system here in our office for a year and a half, and it's pretty much been running smoothly. One employee who works out of the office has a problem that she can't make outgoing calls on a temporary basis every so often (a few times a day). No one else has this problem, her settings are fine, and she regains the capability spontaneously with no

Hi, I'm running asterisk 1.4.22 on a debian server. I have php5 installed and it works correctly command line. When trying to run a php script via AGI, I get messages such as: GI Tx >> I> AGI Rx << #!/usr/bin/php5 -q AGI Tx >> 510 Invalid or unknown command The scripts are completely executable and owned by asterisk -rwxr-xr-x 1 asterisk asterisk Googling is not helping

I'm trying to setup Asterisk on my Linksys WRT54G router and it appears to startup successfully (no errors) and it says it is listening on 0.0.0.0 port 5060, but I am unable to connect to it. I've tried "telnet localhost 5060" but it just says connection refused. I've also tried connecting from another machine on my network (eg. telnet 192.168.0.1 5060) but it also says

Regarding this message, I've actually been told one caller who has consistently had this problem was using Vonage, but calling from his Verizon line, it worked. This skewed my survey. Therefore I do believe it's the same callers having the issue, and in which case, I think Vonage is to blame. I found this thread:

Hi, we're running Asterisk 1.2.10 and have been randomly being left blank voicemails with long messages that we can't hear. I've searched and searched but cannot find a solution. This is what happens: Internal Server runs Asterisk 1.2.10 where our mailboxes are Incoming Server (behind a firewall) runs Asterisk 1.2.13 and calls are bridged between this server and our internal server.

Hi, For a few weeks now, our asterisk server has been experiencing something very odd. From time to time, voicemail.conf would go blank. We finally tracked it down to happening when someone attempts to change their password. It seems the file is touched, but not written to, and we're left with a blank voicemail file. Permissions seem to be fine: -rw-rw-r-- 1 asterisk asterisk 12707

Ok, I've done some more research and I don't think I want an FXO box... What I'd like to do is use BroadVoice (with their BYOD plan) and then run Asterisk on my WRT54G router. I'd also like to use my regular home phones without having to use a special "SIP" phone... (eg. I like my Vtech normal cordless phones) What do I need to buy to get this working? It sounds like I

Asterisk seems to register just fine with BroadVoice (asterisk -r, and then sip show registry shows sip.broadvoice.com is "Registered") ...but when I try to call my broadvoice number (from a cell phone), it rings one single time and then says "The party you are trying to reach is not available to take your call." This doesn't seem to be an Asterisk message but seems to be

If I understand this correctly, this is a user outside your firewall dialing in to your office over the Internet. Always, inbound calls work, but sometimes, outbound calls do not work. So if you have replaced the hardware totally, and you still have the same problem, it could be a routing issue with an upstream ISP. The way to test for this is to do a traceroute from her LAN to your office. Then,

First off, I'm sorry for sending so many messages to the list-serv. Hopefully this will be my last for a while! I was going to use my WRT54G router as a small Asterisk box, but I forgot that I had a spare eMachines computer (Intel Celeron 633 MHz, 20GB HD, 64mb RAM). Will this machine work OK for a very simple dedicated home Asterisk box? Also, what is easiest linux distribution to use and

Incoming calls from my Sipura 3000 don't seem to be correctly routing to Asterisk (or something?) Here is my Asterisk configuration for my incoming PSTN line: Code: [1000] type=friend host=dynamic context=incoming secret=6769 dtmfmode=rfc2833 disallow=all allow=ulaw insecure=very Inside of extensions.conf, I have this: Code: [incoming] exten => s,1,Answer( ) exten =>

I am using Trixbox 1.0(Asterisk 1.2.7.1)at a customer site. They whishes to change the default Voicemail behavior. Standard behavior No answer/Busy -> send to Voicemail Requested behavior No answer/Busy -> message that if you press 9 you will instead be cent to reception -> send to Voicemail or Reception if 9 pressed. I want this to always happen when Voicemail is invoked. How

Do you have a bounced email, we can look at for clues? > On Jul 10, 2015, at 12:49 AM, Manuel Klimek <klimek at google.com> wrote: > > Ok, apple addresses still bounce without a reason - the sendgrid folks say this is completely controlled by apple.com <http://apple.com/>'s mail servers - do you have somebody you can ask? > > On Thu, Jul 9, 2015 at 10:10 AM Manuel

Those seem to be comments by the original author? Is this a problem? On Wed, Jul 8, 2015 at 10:31 AM Tamas Berghammer <tberghammer at google.com> wrote: > Hi Manual, > > Since the Phabricator update I noticed that the username of the reviewer > isn't displayed for some comment added to the review (e.g.: > http://reviews.llvm.org/D11016). Can you check it out what is

Files '.arcconfig' still contain reference to http://llvm-reviews.chandlerc.com/, so arcanist doesn't work. Thanks, --Serge 2014-04-06 3:11 GMT+07:00 Manuel Klimek <klimek at google.com>: > On Sat, Apr 5, 2014 at 8:42 PM, Manuel Klimek <klimek at google.com> wrote: > >> Short update - the sending to the *-commits lists doesn't work yet - I'm >>

On Thu Dec 11 2014 at 10:52:05 PM Duncan P. N. Exon Smith < dexonsmith at apple.com> wrote: > Manuel, I'm getting another problem: every commit I make, Phabricator > sends me an email with "[Diffusion]" in the title. This is just the > last day or so, so I figure it also has to do with the update. > Yea, that's a new feature we got with the update. You can

On Mon, May 19, 2014 at 1:48 PM, Alex Bradbury <asb at asbradbury.org> wrote: > On 12 May 2014 08:35, Manuel Klimek <klimek at google.com> wrote: > > On Mon, May 12, 2014 at 9:34 AM, Manuel Klimek <klimek at google.com> > wrote: > >> > >> It seems that we cannot execute svn commands against llvm-project any > >> more: > >> $ svn

Can you point me at an example? I've spot checked stuff and cannot see anything out of the ordinary... Thanks, /Manuel On Thu Dec 11 2014 at 9:17:40 PM Robinson, Paul < Paul_Robinson at playstation.sony.com> wrote: > What I'm seeing is that Phabricator emails double-space *everything* > (not just the diffs). > > --paulr > > > > *From:* cfe-dev-bounces at