similar to: FAX + Digium + SpanDSP

Hi, I'm using Asterisk and a TE110P E1 PRI in Chile. When I call to a disconnected number or any not operational number, the telco sends the Hangupcause disconnection code and an audio message notifying the disconnection cause to the user. Asterisk does not allow the user to hear the audio message form the telco, instead it cuts the call. Any other legacies PRI PBX I've tested allow

>Does IAXmodem allows you to receive faxes with any extensions >(auto-detecting incoming faxes). You just let Asterisk do the fax detection for you, and when it hears CNG, send it to the fax extension, and your fax extension would just Dial() one of the IAXmodems (using IAX) >>DRi@b-w-computer.de wrote: >> sure in an small office you can use iaxmodem/hylafax to receive faxes

Hello list. I've been running a Cisco VOIP WAN for the last two years using CallManager V3.2. The remote 1760 routers are set up as H323 gateways. I've got a VG200 that is my PSTN gateway with a full T1 voice trunk to the local CO. I'm also running Unity v3.x for voicemail. We are currently using two ATA186 devices that are using the G.711 codec to pass incoming calls on the T1

Hi Last month, people reported a crash with Asterisk 1.2.13 and spandsp-0.0.3 when receiving a fax using fax detection. Today I've tried 1.2.14 with the latest spandsp 0.0.3pre27 and with the snapshots for app_rxfax.c and app_txfax.c. The problem still happens. Has anyone found how to resolve this issue? I tried emailing Steve Underwood (with crash backtrace) but he hasn't

I am so fed up with Digium cards. My company first owned a TE410P, I installed it in a Dell server and "enjoyed" its instability (we bought it months before Digium warned about the incompatibility issues). Then we switched to a TE411P for the hardware echo cancellation. Now we want to receive fax (< 20/day) on it and guess what ? Since April 2006 (again a few months after we bought

I made a little write-up that attempts to synthesise a lot of the information out there about how to get HylaFAX working with Asterisk by way of IAXmodem for inbound faxing: http://blog.evaristesys.com/?p=24 Of course, there are bound to be some things I've left out or are grossly in need of correction. So, before I link it off the voip-wiki I am extremely eager to solicit the input of

I've searched the list and could not find any solutions even though this question has been brought up. I'm not able to fax out multiple pages of tiff, where only the first page is received but not the other pages at the receivers end. I have no problem with receiving multi pages at my side. I'm using SuSe9.1, asterisk-1.0-RC2, spandsp-0.0.2pre18, tiff-v3.5.7. Please advice. Thanks.

Dear gods of the PBX (flattery works here, right?) - I've been pulling my hair out trying to get Asterisk to receive and decode a fax using spandsp and app_rxfax. It seems like it should be working. The fax machine on the other end connects and Asterisk reports a fax coming in. But when it's done all I have is a 2 or 3 KB TIF (see attachment). The console activity looks completely

I've a stock RH9 system with spandsp 0.18. Faxing out over a PRI to a USRobotics modem on a stock Suse9.3 system with hylafax fails with the following errors in the hylafax logs: Jun 30 19:28:53.23: [ 608]: RECV/CQ: Bad 1D pixel count, row 0, got 595, expected 1728 Jun 30 19:28:53.23: [ 608]: RECV/CQ: Bad 1D pixel count, row 1, got 595, expected 1728 Jun 30 19:28:53.23: [ 608]: RECV/CQ:

I have been attempting to download, compile and configure spandsp to function with * without much luck. I am guessing that some assumptions were made regarding the users knowledge level of Linux. Sadly, I must not live up to those assumptions. My problem begins when after compiling spandsp I look for the app_rxfax.c, app_txfax.c, app_dtmftotext.c and makefile.patch files to place in the

Hi list, I'm running current SpanDSP http://www.soft-switch.org/downloads/spandsp/spandsp-0.0.4pre6.tgz with Asterisk 1.2.22 somewhat successfully. Most Fax machines do work but I have problems with people having Tobit FaxWare and Shamrock CapiFax. http://www.tobit.com/login/mrd.asp?CategoryID=120 http://www.shamrock.de/ I've got black bars over the pages. In Tobit some content is Ok,

OK I see the ponit (although I never said that second page is interrupted - I said that in some combinations of resolutions and TIFF options receiving fax "spits" another blank sheet of paper beside the clearly received first page). I have read someware (some faxing tutuorial) that there is some kind of control code (6 EOLs I belive) that should be in TIFFs between pages and that

Hi all, Ok, I've been bashing my head for a few hours now on this, trying to figure out if I've done something wrong, but everything seems to me hunky-dory. So here's the deal: 1. I've compiled the spandsp 0.0.2pre10 source code successfully and also the asterisk application associated with it. 2. Receiving a fax at asterisk works fine, at least appears to be working

hi does any body know which version combination of spandsp/tx_fax/rx_fax will work with * 1.2.24? i tried different combo. they're either seg fault during runtime or won't compile. very frustrated :/ p.s. i know. hylafax/iaxmodem is far more stable. but i have specific reasons to use rx_fax. -- Edwin Lam <edwin.lam at officegeneral.com> Systems Engineer, Office General, Inc.

Hi everybody, I have a Fedora Core 4 x86 32 bit install, which I recently upgraded from asterisk 1.2 to the office 1.4.4 tarball. In the process of doing that I had to upgrade some autoconf/automake stuff, but it worked fine, and my new asterisk works fine. Except that anytime I receive a fax with spandsp and app_rxfax, asterisk seg faults. I have applied the spandsp

Hello- Firstly thanks very much for the work you have put into SpanDSP and the time you spend to assist people here :-) I am currently running SpanDSP 0.0.5 with Call Weaver. Is there any or sufficient gain to be had from upgrading SpanDSP? Michael

I have a potential client that wants to send many faxes simultaneously, over E1 trunks. How CPU intensive is spandsp's txfax? How many concurrent faxes could be sent by a decent CPU (e.g. Xeon 3GHz) before timing starts to get disrupted? Cheers Tony -- Tony Mountifield Work: tony@softins.co.uk - http://www.softins.co.uk Play: tony@mountifield.org - http://tony.mountifield.org

Hi all, I'm trying to setup an asterisk based fax receiving machine. i'm using asterisk 1.2.18 and app_rxfax with spandsp 0.0.4pre9 I have no problems with a modem-fax, but with the fax machines i have tried almost every fax fails, both in sending and receive. the machines are sending a receiving a lot of faxes every day and working well, so i think the problem is on the spandsp side. i

I have spandsp installed and working, but when it emails using Scotts mailfax, the attachment is a dat file. I tried to rename the file to .tiff or .pdf, but it will not open. In the /var/spool/asterisk/fax folder, that faxes are there as tiffs, and I can open those without any trouble. The problem is in the conversion from tiff to pdf. Is there another package that needs to be installed for

I can't get spandsp to compile. when I go to the */apps directory i continually fails. Makefile:80: warning: overriding commands for target `app_rxfax.so' Makefile:77: warning: ignoring old commands for target `app_rxfax.so' cc -fPIC -c -o app_rxfax.o app_rxfax.c app_rxfax.c:45: error: `PTHREAD_RECURSIVE_MUTEX_INITIALIZER_NP' undeclared here (not in a function) make: ***