similar to: Problems with 7960 + callwaiting

ala cisco 7960 -----Original Message----- From: Matt Schulte Sent: Thursday, December 16, 2004 10:34 AM To: 'Paul A Brown' Subject: RE: [Asterisk-Users] Cisco 7960 (SIP) hold problems Sure thing, the biggest problem I had was getting the SIP filenames working correctly for updating the firmware (blah, I love Cisco but these phones are a joke for support). This works for me! Good luck.

Hi, I am upgrading a Cisco 7960 phone from SIP V.5.1 to 6.0 and then will to go up to 7.5 However in my first attempt to go from V.5.1 to 6.0 this is hat happens: - The phone reboots - The phone then reads the file OS79XX.TXT from the TFP server. In the file I added the version "P0S3-06-0-00" - It starts upgrading firmware - Then I get the following message: (Upgrade Failed -

I recently updated my phones Cisco 7960 phones (3 of them) in a high volume call place, where the Secretaries use the 7960 phones to answer inbound calls, as many as 15 simultaneous calls between all three of them. Since then I have had only constant problems, mainly that after 3 calls on a phone, if they try to xfer or do any ohter things (sometimes just answer the 4th call) the phone freezes,

I've searched around and found a few similar situations where the phone will call out when using a Asterisk server but not receive inbound calls. My issue is a little stranger. If I call out from the phone then the phone will receive the next inbound call. The phone will not receive another inbound call until a call out again from it first. Any ideas? I am using SIP and am using the latest

Hi, I can't upgrade an old 7960 from SCCP 3.0 to SIP 7.5. Could you help ? From http://www.cisco.com/en/US/tech/tk652/tk701/technologies_tech_note09186a0080094584.shtml#sccptosip2, I got the following: 1. Copy the desired binary image from Cisco.com to the root directory of the TFTP server. 2. Specify the image in the configuration file image parameter for the protocol

Typo in your OS79XX.TXT P00 ? instead of P0S !? -----Original Message----- From: Michael L?jtnant [mailto:ml@zyxel.dk] Sent: 17 August 2004 13:31 To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] Cisco 7.2 firmware for SIP 7940/7960 released Hi Shaun, Saw you post, and rushed to their ftp-server and downloaded it :-) But, I can't make my phone (7940) upgrade, so maybe you

I've got a Cisco 7960 that I'm trying to convert to SIP. Here's what "Firmware Versions" says: App Load ID: P00305000300 Boot Load ID: PC03M030 Version: 5.0(3.0) The files that I have are: P003-07-1-00.sbn P003-07-1-00.bin P0S3-07-1-00.loads P0S3-07-1-00.sb2 If I put "P003-07-1-00" in OS79XX.TXT, the phone tries to tftp XMLDefault.cnf.xml. I've

Hello all, I know this isn't strictly Asterisk, but I'm sure that there are more people here using the Cisco 7960 w/ SIP, so I thought I'd post here. I've just bought a Cisco 7960 phone to use with Asterisk. It came with the CallManager image on it. I've got the 4.4 SIP images (P0S3-04-4-00). If I put "P0S3-04-4-00" in the OS79XX.TXT file, the phone downloads this

Hi, I have been trying to get my 7960 & 7960G to register with two seperate * servers. Asterisk box 1 is on out on the Internet running: Asterisk CVS-10/30/03-20:08:15 Asterisk box 2 is on the Lan running: Asterisk CVS-12/19/03-19:28:30 7960 is on the LAN running: P0S3-04-4-00 7960G is on the LAN running: P0S3-06-0-00 In sip.conf I have nat=yes to get the phones to register properly.

Hi all, i have a problem with some cisco 7960. Yesterday i did a firmware-upgrade from 3.1 (1.2) with P0S30203.bin as described in the most documents. Now i get the message Phone unprovisioned and in TFTP-Log i find the following line: 07.03.2005 19:58 :Timeout error sending P0S3-07-3-00.bin to 192.168.0.83, 0 bytes So i think it now wants to load the file P0S3-07-3-00.bin. But i have not

2 new Cisco 7960 phones are requesting a CTLSEP file, seems like I triggered the universal application loader. I want to load the sip image 7.2 According to this Cisco information: http://www.cisco.com/en/US/customer/products/sw/voicesw/ps4967/products_upgr ade_guides09186a008022a968.html#wp1047292 If the CTLSEP MAC file is not present or is empty, the phone proceeds in nonsecure mode with the

Dear All, I'm trying to configure my new phone Cisco 7960 to work with asterisk. I followed http://www.asteriskguru.com/tutorials/cisco_7960_ip_phone_configuration.html and I got into the point where I can see on the the display line indication showing "55 <phone icon with x>" so it looks like the phone is not registered. The phone and the asterisk are in the same local

Here's a clip of comments lifted from a Cisco bug list. This will be perhaps useful to those of you who have just purchased a Cisco phone off eBay. JT ------------- (1) Short problem description: Documentation on how to load SIP image on phone with skinny software (2) Longer problem description (what happens): If the phone is loaded with the Cisco Skinny code, then there is a small

Hello List, I am looking at implementing auto callwait on my asterisk box ( has single FXS to which my phone is connected). Is there a way to terminate the current active call (soft-hangup) and auto accept the new incoming call ? (I don't care for call indication). Please advice, -Akshay -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello all, I've got myself into a bizzare situation that I can't seem to get myself out of... Was wondering if anyone had some advice that might get me 'over the hill' on this... Some background: PBX consists of an Asterisk box (running TrixBox), 4 Cisco 7960's, 2 Polycom IP500's, and now an additional Cisco 7960. The phones are all on a separate LAN. There is

When I try to flash my 7960 with SIP I get messages like this in the tftp server logfile: Aug 27 02:01:17 home tftpd[32590]: tftpd: trying to get file: P0S3-03-0-00 .bin and the phone says something similar on the display for a brief moment and puts a funny char where the space in the filename above is. Seems like around 1 in 4 of the 7960's I have flashed with SIP have this problem. Anyone

Hi all (is a bit of a Cisco question, but perhaps it's already been asked here). I'm trying to setup a TFTP server for dynamic configuration of my 7960 Cisco phones. Cisco docs suggest I download the following files from their web site: * OS79XX.TXT * SIPDefaultGeneric.cnf * SIPConfigGeneric.cnf * RINGLIST.DAT * P0S3xxyy.bin * P0S3-xx-y-zz.bin * dialplan.xml * syncinfo.xml I only

Hello, and thank you for your time answering my question. I have a Cisco 7960 running SIP firmware POS3-06-X-XX. If I want to upload SIP configurations via *.cnf file from my tftp server, do I need to include the OS79XX.TXT and P0S3-06-X-XX.bin to the tftp server root directory to be uploaded every time the phone reboots? Thanks again for your help. Oliver

Hi, I got a problem of having to upgrade 35 Cisco 7960 phones from default firmware of 3.1 to 7.5. The problem I get is that when trying to upgrade I see on the tftplog that it can't seem to find the file (8 character issue). So I renamed the files to suit what is supposed to be in them. I am trying incremental upgrades from 3.1 -> 5.3 -> 7.5, with no luck. It goes to

This for the archives in case it may help someone: I was able to upgrade two Cisco 7940's from firmware P0030301MFG2 to SIP 7.1 as follows: 1. Installed 7.1 images from the Cisco zip file to the TFTP server. 2. Specified "image_version: P0S3-07-1-00" in SIP<MAC>.cnf and SIPDefault.cnf 3. For the older of the two phones, renamed P003-07-1-00.bin to P0S3-07-.bin, making it