similar to: FW: asterisk and nortel meredian option 11c

Skipped content of type multipart/mixed-------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 186 bytes Desc: OpenPGP digital signature Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20061103/b35592e2/signature.pgp

Anyone interfaced * to the Nortel option 61c pbx via T1's, pri, etc? Need to begin planning the implementation, purchase cards, etc. Any recommended approaches, configuration problems, etc? Off-list is fine if you'd like. Rich radamson @ routers . com

Does anyone know if Asterisk can function as a voicemail system for a Nortel Option 11 PBX? We will be connecting Asterisk to act as an IVR before sending calls to the Nortel and as a Voicemail system in case the user does not answer. That part is trivial, the only problem we have is that the customer wants the Voicemail light on the Nortel phones to light up when a user gets a new message.

Greetings to one and all on this fine list; We have the current system: Meridian 1 Option 11 +-------------------+ | | ISDN/30 (DASS/2) ===> |NTAK79BB (2MB Pri) | | |<-->4x16 port Digital / 1x16 port Analogue ISDN/30 (EUROIDSN) ===> |NTBK50AA (2MB Pri)

I've tried to do it myself, but my head is now bleeding from hitting it on the wall so much. We need someone who knows asterisk and Meridian PRI cards to help! If required, we will pay for a day's consultancy in order to get this thing working. Or, do I need to scrap my plans to keep the meridian system (60 phones ...) ... Please say no .. :) Please contact me offline

Hi, The PBX recives alarms from the TE110p card and are mainly pointing at frame errors and Loss of signal. Asterisk is configured as Zapata.conf signalling=pri_cpe switchtype=national rxwink=250 channel => 1-15,17-31 Zaptel.conf .... This is what I need to know - the SPAN is currently set to E3 - does anyone know what I need to use for a E1 ? span=1,1,0,esf,b8zs bchan=1-15,17-31 # set this

<p>I am new to the group but have searched the doc's FAQ's etc before posting here.</p><p>&nbsp;We are attempting tie our asterisk server/service to the building's PBX, the building is in the UK and the local PBX is a meridian option 11 installed and mainteined by BT.</p><p>BT Have installed a NTBK50AA E1-PRI card in the meridian with daughter cards

Hello all, I have Asterisk 1.2.1 and a TE110P connected to a Nortel Meridian Option 81C system. The PRI line is currently setup as DMS100. Here are the relevant lines from zaptel.conf and zapata.conf: zaptel.conf: span=1,1,0,esf,b8zs bchan=1-23 dchan=24 loadzone = us defaultzone = us zapata.conf: [channels] language=en context=from-internal musiconhold=default switchtype=dms100

Hi, I need make a VPN between a FreeBSD and a Nortel... The IPSec of FreeBSD is compatible for this ? I will have that to use racoon to make ISAKMP or I can make without it? -- [ Diego Linke - GAMK ] System/Network/Security Administrator E-Mail/Site: gamk@gamk.com.br - http://www.gamk.com.br Public Key: http://www.gamk.com.br/gamk.asc Phone Number: (+5541) 9967-3464

Hi, Was wondering if anyone had any tips or experience in getting a Nortel CS1K and Asterisk 1.4.19 to talk to each other via NRS? So far I've gotten asterisk to place calls to the CS1k via the NRS, however calls originated by the CS1K get rejected by the NRS with a 404 Not Found message. If I take the NRS out of the equation by replacing the IP address of the NRS in the CS1K with that

folk, I see from the archives that the issue of nortel handsets not sending dtmf tones to asterisk has been discussed a couple of times, but there is something I quite havent seen answered yet. Is this dtmf issue a problem with the nortel handsets or the PBX itself? If the handset were changed to another one, would this issue be solved? Or must the PBX be changed completely? rgds eb

Well I am entering into a realm that I don't know. 3 sites with Asterisk 1 site with Nortel Asterisk/Sip calls working fine between the 3 sites. Asterisk to Nortel set calls working fine. (call comes from asterisk to nortel and rings telephone, people answer and talk happens, hangup call clears) Nortel to Asterisk. Set on Nortel gets a busy signal. Any suggestions on what to look

I am connected with 5ess to a nortel switch. Running dahdi 2.1.04 and libpri 1.4.7 and asterisk 1.4.22 Everything is working for a short time. The other side reports back to me that he is getting slip-r errors from the TE122P card. After to many errors (like 11) the d channel shuts down on their side. Any idea what to do about this? I have not ran into it before. Jerry

Hi all, I have asterisk 1.4.26 (and I tried 1.4.29) connected PRI all 23 lines and for the most part everything works. Dialing out on 23 lines to phones works fine. I have to use the Local channel to call the intercom system (from call files). If I only call 1 intercom system at a time so it uses DAHDI/1 everything seems to work as I can call all 8 intercom systems and play a message. The

An HTML attachment was scrubbed... URL: http://brouwer.uvt.nl/pipermail/tinc/attachments/20030609/b06d1073/attachment.html

We have 40 nortel ip2002 phones connected to asterisk 1.6, the problem I have is that the phone looses the connections with the server and then drops calls, we can reconnect but the customers don't like it. Anyone has the same problem? /ralf ________________________________________________ Ralf Tr?skman, IT AdLibris AB, Sveav?gen 56C, 111 34 Stockholm, Sweden Dir: +46-(0)707548074, vxl:

Hi, I need to integrate my Asterisk with a Nortel Meridian 11, but I can?t use PRI, Analog lines, etc. It has to be via SIP protocol, and there is few information about this type of integration. Could someone please help me?? Thanks, Pablo -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi Folks, I'm trying to send CallerID Name information out to the PSTN via a PRI with Bell Canada with no success. With inbound calls (originating from the PSTN) CNAM is received successfully, and we've not had any similar problems with other Telco PRIs, so I'm stumped.

Hello, is it possible to connect a Nortel i2004, (i2002) IP Phone to an * PBX? I have seen on the net that there should be an SIP firmware aviable for the phone, anyone an idea where to get it? Because orginally they use a own protocol to connect to an Meridian, BCM or CSE1K. Another idea is to write a module for * that can handle this protocol. bye SLiME

Howdy- Has anyone on the list implemented Nortel IP telephones (the exact name escapes me at the moment) with *? Doing some work for a small trading firm which needs a phone to have the ability to dial into a improvised hoot-n-holler system (* conference), so it needs speakerphone, and multi-line capability. Also, I'm open to cisco phones, going to look at those now. Thx, -cedrick