asterisk users - Sep 2005 - RE: Asterisk with Meridian1 option11 in the UK

Hi,

The PBX recives alarms from the TE110p card and are mainly pointing at frame
errors and Loss of signal.

Asterisk is configured as

Zapata.conf
signalling=pri_cpe
switchtype=national
rxwink=250
channel => 1-15,17-31

Zaptel.conf .... This is what I need to know - the SPAN is currently set to
E3 - does anyone know what I need to use for a E1 ?
span=1,1,0,esf,b8zs
bchan=1-15,17-31 # set this to 1-15,17-31 for E1
dchan=16 # set this to 16 for E1

loadzone	= uk
defaultzone	= uk

I am currently trying to connect a Meridian1 OP11 (card in the meridian box
is a NTBK50AA 2mbPRI (E1)) with a asterisk server (TE110P card) however we
are experiencing problems in the communication between the two.

The pin outs are as follows
PRI CARD PINS (rj45)
1 w/orange
2 orange
3
4 blue
5 w/blue
6
7
8


NTBK50AA has a Telco 50 connector
PROVIDER PINS - as per the op11 DTI/PRI install/maint manual
48 blue
24 w/orange
23 orange
49 w/blue

Any help will be greatly appreciated

Thanks
Chandra Mistry