similar to: "I can hear them but they can't hear me" with VoipBuster

Hello, I'm trying to receive a fax to my inbound number from voipbuster. Asterisk receives the call and starts the rxfax application successful, but then nothing happens. The calling party is still hearing a ringing tone, or sometimes nothing. Voicecalls are working correct and without problems. For testing I've add a local number (300) to the dialplan. When I call this number

I am trying to move from IAX2 to SIP for voipbuster, moving at the same time to sip1.voipbuster.com. When I try calling out, I see that there is SIP exchange, and in many cases also RTP data being exchanged. Hover in a very large number of attempts the connection is not established. Half of the time there is no RTP, the rest of the time there *is* RTP data flowing in two ways, but no ringtone is

Hi, all I am reallty pissed with their service. I wonder if this is common problem. Firstly, all of my calls are terminated after 30s. And termination happens in a strange way. My local asterisk server does not see the disconnection, but remote party is disconnected. Basically, I am still on the phone, while remote party was disconnected. When I hang up, I get something like that: Apr 20

I would like to put srvlookup=no in my SIP conf, so that I don't get DNS issues (Asterisk stops responding). I use VoIP Buster and in sip.conf I use sip1.voipbuster.com. When I do sip show peers in CLI I get voipbuster/tomo 194.221.62.207 5060 OK (27 ms) And when I ping sip1.voipbuster.com [root@tomo ~]# ping sip1.voipbuster.com PING sip1.voipbuster.com

How to set-up LCR ? a. which companies can be used with LCR? b. how to set-up & maintain LCR? c. multiple connection to one gateway? Example: +886223456789 could be reachable via a. ENUM free b. Dundi free c. Voipstunt free d. Voipbuster free e. Nufone $ f. Voipstunt $ g. others with 4 concurrent connections $$ h. others with 3 concurrent connections $$ I am looking

Hi, I am new here on this list, and have a problem of which I hope that somebody here can help me with it. I have a Voipbuster account, with which I would like to make phone calls via my Asterisk PBX. If I let X-Lite register directly at voipbuster.com, everything is OK, but if I let Asterisk register there, it says "registration for XXXXXX@sip.voipbuster.com timed out, trying again",

Does anybody else see the same behavior for VoipBuster connections? When I trace one of the other SIP peers, I see it sends this message: ---------------------------------------------------------------------- <--- SIP read from 82.101.62.99:5060 ---> SIP/2.0 180 Ringing Allow: INVITE,ACK,BYE,CANCEL,PRACK,SUBSCRIBE,NOTIFY,UPDATE Call-ID: 740540ee64fa957513ce89f03ef5e3f2 at sip.xs4all.nl

I have something like below in my sip.conf. How can I put this into Real-time? [voipbuster] type=friend ; (or "peer" if we don't need incoming calls, or if there is a separate section with "type=user") host=sip1.voipbuster.com disallow=all allow=ulaw allow=alaw allow=gsm allow=g726 username=abcd1 ;={{YOURUSERNAME}} fromuser=abcd1

Hi, I'm using voipbuster at work, and I've got 2 questions: 1) Is it possible to send faxes using voipbuster connex? 2) Is it possible to cut off or cover the voice that say the charge per minute?(I've payed the '5' euro, and from that moment I've got it!). Of course I understand that is to let me know how much I'm going to spend, but I do not like it, expecially when

Hi, all I am still battling to connect * and voipbuster. What protocol does it use? Ethereal capture shows UDP traffic, but no SIP or IAX traffic when using their client. VoipBuster client connects to connectionserver.voipbuster.com on port 11112 for authentication. Call itself is placed on different server. I have tried to connect using SIP and IAX and it seems that no authentication is

Hi, all, I got my * to work with voipbuster service. And it works quite well when I am calling USA or Europe. However, for local calls, I am experiencing long delays (About 1s). As far as I know, voipbuster application does not have this problem. I am using IAX and gsm codec. Any ideas on how to combat this? Thanks, Rudolf

Hi All, Any VoipBuster SIP users on this list that'd be willing to test VoipBuster outbound VoIP to PSTN? All numbers I tried from my (*) server are supposedly being connected, but no phone rings! Also their new WebStart function doesn't cause my phone to ring either... TIA! -- Francesco Peeters

Hi, all Here is a something I found on the web: http://www.voipbuster.com And it works OK too. Now, I want to use it via asterisk, so I ccan use my normal phones instead of PC application. Did anyone try to connect astersisk and VoipBuster? Thanks, Rudolf

Hello, I am using voipuser.org service, and am trying to make a SIP call. Everything seems to work fine, except I can't hear anything on my end. When I make a SIP call, the other party can hear me, but I can't hear anything. I am using asterisk + Digium TDM board with an FXO port where I connect a regular telephone. Can anyone assist? I believe I have some asterisk

Hello everyone! I am using wine 0.9.30 with openSUSE 10.2 I've tried to install and run VoipStunt, and program installs with no error, but fails to start with the following output: dodo@Locutus:~> wine "C:\Program Files\VoipStunt.com\VoipStunt \VoipStunt.exe" preloader: Warning: failed to reserve range 00000000-60000000 err:module:import_dll Library gdiplus.dll (which is needed

Hi, does any know why? i can make call out with my asterisk and voipstunt but i can't get call in on my voip in number i get rejected. if i use Sipura without asterisk i get in calls here is my sip.conf ---------------------------------------------- [general] useragent=nedi port=5060 context=default ;tos=lowdelay disallow=all allow=ulaw allow=alaw allow=gsm allow=g726 language=de

The following is my dialplan for outgoing international call. What I want are: - when people dial 9011604xxxxxxx , 9011605xxxxxxx, 90114411xxxxxxx, 90114421xxxxxxx, use voipstunt to dial out - otherwise, use my pstn to dial out. What I've found is when i dial 9011604xxxxxxx , 9011605xxxxxxx, 90114411xxxxxxx, 90114421xxxxxxx, it always use the pstn to dial out. Anything wrong with my dial

voipstunt: "Forbidden - wrong password on authentication for INVITE to ...." I have paid, the password was not changed, ... I have no idea why. Is there anything what I can do to get this "failed" call over to another provider, so that the user can complete the call? (Dialstatus was an idea, but the line does not show up in CLI) [Apr 5 09:22:36] -- Executing

I've got a strange situation with musiconhold. It works if I dial my extension 6000: >From extensions.conf: exten => 6000,1,Answer exten => 6000,2,MusicOnHold() Debug output if I call 6000: -- Executing Answer("SIP/gs1-b6ee", "") in new stack -- Executing MusicOnHold("SIP/gs1-b6ee", "") in new stack -- Started music on hold,