similar to: HELP!!!! Weird TDM2406E unable to bridge all outgoing calls.

I installed TDM400P and X100P pci cards in a system running mandrake 10.1 official, kernel 2.6.8.1-12mdksmp. I can compile zaptel, libpri, asterisk and modprobe (zaptel, wcfxs, wcfxo) without errors. Except that running ztcfg and asterisk fails. [root@asterisk asterisk]# ztcfg Notice: Configuration file is /etc/zaptel.conf line 3: Unable to open master device '/dev/zap/ctl'

Hi i have a tdm2400p and installed asterisk 1.4.11 with zaptel 1.4.5 im having an error message when in running asterisk with the tdm card in. here's the error from the console of asterisk: [Nov 18 10:30:44] ERROR[5557]: chan_zap.c:7489 mkintf: Unable to get span status: Inappropriate ioctl for device [Nov 18 10:30:44] ERROR[5557]: chan_zap.c:10466 build_channels: Unable to register channel

Hi, I have a box with Debian Sarge, Asterisk 1.2.1 (and zaptel 1.2.1) and a TDM2400P with echo canceller. I installed the card but no echo cancellation is being made...seems like the echo canceller module does not work, infact the software cancellation is working. My zapata.conf has echocancel = 128 and echocancelwhenbridged = yes but no echotraining parameter which gives a warning. I found

hi you, I'm having problem with voice quality on my trixbox using TDM2400B.The trixbox is connected via 20 FXO ports on a TDM2400 with the hardware echo cancel module. Echo cancel almost works, but the users hear what they describe as a 'background crackle/buzz' coming back when they talk. anyone have the same problem? pls help me. thanks a lot. my trixbox and config

We just bougth a tdm2400p with all the modules for FXO, but we are having some troubles with the card, cause it aparently is stripping some digits from the dialed number, we tested the same server with a tdm400 and everything worked as expected. We?ve already added "w" before the dialed number with no results, is there any way to solve, is it a bug thanks

Hi All; To overcome the echo problem, what mainly I have to do in the configuration other than the following line in the system.conf under dahdi directory? echocanceller=mg2,1-16 1) How can I know if the digium card supporting echo cancellator? 2) If I am getting a message in the consol that unable to enable the echo cancelator, then what does it means? The hardware is not supporting echo

Hello. I have a TE212 configured in E1 mode. This is shown in a cat /proc/zaptel/2 and 3 (where the card is configured): cat /proc/zaptel/2 Span 2: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" HDB3/CCS/CRC4 RED NOTOPEN 25 TE2/0/1/1 Clear 26 TE2/0/1/2 Clear 27 TE2/0/1/3 Clear 28 TE2/0/1/4 Clear 29 TE2/0/1/5 Clear 30 TE2/0/1/6 Clear

Hi, I just read a pressrelease from VON that Digium will soon be releaseing a couple of new cards. What got me interested was: "The TE420P and TE415P support 128ms of G.168 (2002)-compliant echo cancellation across their entire 128 channels." Does anyone know when thease will be released and what they will cost when released? Thanks!

Hello, I`ve got a problem which I can`t deal with. I own 2 cards - TDM2400P and TE410P. I`ve put them into a HP Proliant DL380 G4 server, compiled the drivers according to the manual. Unfortunetly there are both cards channels are configured in zaptel.conf file the first module (in this file) sends an error. For configuration: span = 1, 1, 0, ccs, hdb3, crc4 fxsks = 21-24 bchan = 25-39,

A big G'day to everybody on the Asterisk list. I am having a lot of trouble getting the TDM2400P card working in asterisk. I will give the important details below, please let me know if I am doing anything obvious or ideas for debugging this. SUMMARY: I get the right voltages on the line with the phone on or off the hook, but no dial tone, no ringing in or ringing out. INSTALLATION AND

Hi, I'm installing an Asterisk box with a TDM2400P in Brazil. I can make analog phones work while lines are not working. Since I do not know anything about brazilian lines, is there anybody who can tell me what is wrong/missing in my conf files (below)? TIA Giorgio _zaptel.conf:_ fxoks=9-16 fxsks=17-24 defaultzone=br loadzone=br* * _zapata.conf:_ context = inbound_zap echocancel = 128

On 7/5/23 03:17AM, Jim Klimov wrote: > Ah, I thought you missed in my earlier reply the part about a bug with debug printouts in 2.8.0 (fixed on master since), > did not comment on that when you replied with quoting... So, for now options are to bump debugging to 3+ or to build > your own in one of many ways possible :\ I think I'm not following you - with debug 3 -->> it

Ah, I thought you missed in my earlier reply the part about a bug with debug printouts in 2.8.0 (fixed on master since), did not comment on that when you replied with quoting... So, for now options are to bump debugging to 3+ or to build your own in one of many ways possible :\ On Wed, Jul 5, 2023, 06:23 Karl Schmidt <karl at lrak.net> wrote: > On 7/4/23 10:01PM, Jim Klimov wrote: >

Ok - I'm wondering is this is a systemd config bit? systemctl restart nut-driver at malaysia.service Job for nut-driver at malaysia.service failed because the control process exited with error code. See "systemctl status nut-driver at malaysia.service" and "journalctl -xeu nut-driver at malaysia.service" for details. root at malaysia:~# systemctl status nut-driver at

Normally yes - enable and start the target and the particular services relevant to your setup. For the binary you have from packaging (if not rebuilt as suggested earlier), set debug_min=3 in ups.conf section for upscode2, to currently trade driver viability for some storage traffic with more logs :\ Sorry about that, Jim On Wed, Jul 5, 2023, 02:29 Karl Schmidt <karl at lrak.net> wrote:

On 7/4/23 10:01PM, Jim Klimov wrote: > Normally yes - enable and start the target and the particular services relevant to your setup. > > For the binary you have from packaging (if not rebuilt as suggested earlier), set debug_min=3 in ups.conf section for > upscode2, to currently trade driver viability for some storage traffic with more logs :\ > > Sorry about?that, > Jim

A not so technical friend in India is shopping for a laptop. He often travels and stays months in Malaysia and so needs to be able to use the laptop there as well. He typically connects to the internet via wifi, but sometimes must use a telephone line (yes, with a modem). And of course there will be times when he has to plug into mains power to recharge the battery. So to be able to fully use

Dear All, I'm trying to attach a legend outside the plot (Inside plot OK), but failed. Any help is very much appreciated. Thanks. Abd. Rahman Kassim, PhD Forest Management & Ecology Program Forestry & Conservation Division Forest Research Institute Malaysia Kepong 52109 Selangor MALAYSIA ***************************************** Checked by TrendMicro Interscan Messaging Security.

We are setting up an office in Malaysia. We contacted Telekom Malaysia and are surprised to be told that ISDN-30 is no longer available. They are yet to give us information of the replacement technology. Does anyone have any experience and information with this? Thanks in advance.

Dear All, How can I sort a data frame (using one of the column)? Thanks for your support. Regards. Abd. Rahman Kassim (PhD) Head Forest Ecology Branch Forest Management & Ecology Program Forestry and Conservation Division Forest Research Institute Malaysia Kepong 52109 Selangor, Malaysia ***************************************** Checked by TrendMicro Interscan Messaging Security. For any