similar to: Inconsistency with ANI and channel callerid

I've been trying to use the VMAuthenticate function in 1.2+. This function is supposed to "behave[s] the same way as the Authenticate application, but the passwords are taken from voicemail.conf." The problem is that it always gives the "comedian mail" prompt and requests the mailbox number, even though I provide the mailbox number already. The upshot is that

Is anyone else finding in the new audio files that the longer space at the beginning and end of the files tends to be extremely irritating? An excellent example is when going into voicemail and Allison says how many messages you have, the space between the files is annoyingly long: you have ...... four ...... old ...... messages ..and.. first ...... message ...... received ..... July .....

I have an * box connected to a Nortel SL100 through a PRI (US) using the Digium TE410P (quad-span T1 card). I don't have access to the SL100 - it is handled by another group. The span comes up OK (timing, framing fine). However, as soon as the D channel comes up, I get endless "HDLC Bad FCS" errors. I modified logger.conf to get rid of the messages (so I could see what else was

Hello, We're having some issues with CallerID and I thought someone here might be able to shed some light as none of our carriers seem to know what I'm talking about. The issues is this: A client of ours uses an after-hours voicemail service as mandated by their corporate office. We have a Day/Night setting that lets them turn this on and off. A call comes in from one of their

I receive calls over a T1 with callerid and then *ani*dnis*. I am able to strip out the ani and the dnis in the dialplan but when I try to set the caller ID to be the ani, it looks ok but then if I do a NoOp callerid on the next line, I get unknown. Here is the section of my dialplan: exten => _*NXXNXXXXXX*NXXNXXXXXX*,1,Set(ANI=${EXTEN}) exten =>

Hello All, I'm having problems with international calling via Global Crossing. I'm told I need to send a true ani versus a sudo ani. What is the difference and how can I configure asterisk to do this. Global Crossing is denying calls with sudo anis. Thanks, Keith

I'm running into an issue where subscribers to our service cannot call certain 1-800 numbers if they have a caller id blocked account (restrictcid=yes). This is on Asterisk 1.0.9 and our clients are using Sipura SPA-2002's. Our provider uses a SIP/PSTN gateway, so we hand off SIP to them from Asterisk. The problem appears to be that when an "Anonymous" call goes out, there is

Okay went to: http://wine.dataparty.no/ form there downloaded the rpm, http://wine.dataparty.no/rpm/unstripped/wine-cvs-unstripped-013001-1.i386.rpm downloaded the config file and worked through the install guide. I edited the config file to mirror my window setup: c:\ = \mnt\c d:\ = \temp e:\ = \web f:\ = \documents g:\ = \music h:\ = \mnt\cdrom i:\ = \mnt\zip then as a check did $wine -v and

Yes its a T3 split into seven trunk groups with one D channel and NFAS on each. Can you explain the cut function or point me somewhere please? Thanks, Steve -----Original Message----- From: Alexander Lopez [mailto:Alex.Lopez@OpSys.com] Sent: Mon 4/10/2006 12:51 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Cc: Subject: RE: [Asterisk-Users] ANI and DNIS Seperation on

Hi All, My research indicates ANI is not really supported with SIP Channels or passed between SIP servers, even with setting function CALLERID(ANI). So the only place this applies is on PRI interfaces, when sending calls out a ZAP PRI you can set the ANI to whatever and CID Number to a different whatever so on the other end of the PRI you will receive the two different values? Is this correct or

I've got an interesting problem. I just recently upgraded an asterisk server from a may 9th cvs to a 9/29 cvs. When I did the upgrade I was unable to place calls through the PRI. The calls would process fine, but the provider would reject the call and send me a cause 69 or 77 failure code "Unallocated (unassigned) number". Upon contacting the provider, they told me I was

Good Day list, Need assistance determining the best place to read up on whether Asterisk can help me out. I have a situation where I need to do the following <PRI from Telco> ------- <Analog Channel Bank>------------<Proprietary Box> | | | | | | <PRI Port 1 of Digium Quad T1> <PRI Port 2 of Digium Quad T1> | | | | | |

Can someone in Asterisk'land subscribing to 800 service explain to me how to setup extension.conf to route calls based on the incoming DNIS/ANI. For example I want to route 3 incoming 800# coming across a trunk group to all land in the same queue. So I guess I am asking how to perform DNIS/ANI based call routing? -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, does anyone of you have made it to get the ANI also picked up? I mean: if I fetch a foreign call to me by using the pickup application I want to see the callerID/ANI of the caller to the foreign extension. Is that possible and if yes - how do I achieve that? Regards, Christophorus

Hi folks, I know this isn't an Asterisk question, but I'm really desperate and wondering if someone could help me. I apologise for the off-topic post. Cisco phones connected to CallManager can forward calls. But when they do, CallManager conserves the originating caller's ANI in the new leg that is built. I cannot find a way to get it to rewrite the ANI to be that of the phone.

For our application we want to read the callers number back to them (calling in on a 800# that would somehow point to multiple lines -- figuring that all out still). I was under the impression that calls to 800#'s are unblockable by the caller (irregardless if they have caller id blocked or not). I'm not sure if this is because of ANI or CLID (or if ANI _is_ CLID) or how any of this

We are using TDM40B's to connect some devices to Asterisk which depend on caller information arriving as ANI, rather than as Caller ID. I am unsure if the TDM40B supports this in the first place, and if so, I am unsure how to configure it so. I've searched the wiki but couldn't find anything. Can someone please confirm whether or not this is possible? As a fallback I could reconfigure

OK I am going to do it again. Global Crossing is now sending ANI but it is not in the format I expected. Any one know of a way to get this data into two seperate variables? The first number is ANI and the second is DNIS so it is "*tendigits*tendigits* on one line like below. < Called Number (len=26) [ Ext: 1 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan

Is there a setting somewhere in * to define whether I am receiving callerID or true ANI? Global Crossing claims they are sending ANI but I dont think so. My understanding of ANI is that it is always sent, regardless if callerID is blocked. If I dial *67 and my DID, I get "Presentation: Presentation prohibited of network provided number" and no number. Before I call GC on Monday

Hello, Being totally fed up with the lack of quality and reliability from both VoicePulse and BroadVoice, We are switching to a direct IP connection to Global Crossing. We've installed a local point-to-point T1 into their CO, and they will give/take SIP g729a directly and act as the gateway for us. In setting up the inbound SIP service, they are asking the question, "In what format do