similar to: SIP Jitter buffer. What version of Asterisk PLEASE?

Hi, I have a SIP client which is registered to asterisk. Asterisk is registered to a SIP trunk and also handles the media. Now since my client has some issues in its RTP Tx, which seems to have some amount of jitter (mean jitter as per ethereal trace is about 17ms, max jitter is 20 ms and max delta is 85 ms), to over come that I have enabled jitter buffer in the SIP channel by setting sip.conf

Hi, I know that there was a jitter buffer patch (for sip) for the 1.0.9 branch some time agin. At this time, we can not upgrade to 1.4.x. Is there a useable, fairly stable INCOMING sip jitter buffer patch? That is.. I want Asterisk to jitter buffer incoming SIP packets. -------------- next part -------------- An HTML attachment was scrubbed... URL:

We have a customer on a wireless connection that has very bad jitter. They can hear people fine, but people have a very hard time hearing them. They are connected via a SPA-2102. It is a SIP client going to a SIP trunk. Something like this in sip.conf [general] would be in effect for all SIP clients: jbenable = yes jbmaxsize = 150 jbresyncthreshold = 1000 jbimpl = fixed jblog = yes I only want

hello all, I'm overlaying numerous scatter plots onto a map (done in PBSmodelling). In this case I'm placing each plot by setting par(fig) to the centroid of map polygons. The location/mapping part is not so important. There are cases of small overlaps for some plots (ie figures) so I'm keen to write or find a function that moves my small scatter plots so they don't overlap. A

This is kind of a repost of one part of a previous question I have had. Peer Username Call ID Seq (Tx/Rx) Lag Jitter Format 213.137.73.178 xxxxxxxxxx 3705df0a5f7 00103/00000 00000ms 0000ms 4 1 active SIP channel(s) I see that there is 0ms Jitter set. How can I set a Jitter buffer for use with sip channels? I can't seem to find any documentation about this.

This might be a better question for the dev list, but I don't think they want to be bothered by my silly questions. Does anyone know when we can expect to see a jitter buffer for SIP channels? I know they've been working on a generic jitter buffer since around last summer, just wondering if there's been any progress.

Hello, I'm running into a few situations on lossy network links where a SIP jitter buffer w/ some PLC would be helpful. My main TDM gateways are running 1.2 (which is solid, stable, reliable and very very very well behaved when you know it's limitations), but I'm considering upgrading them before the end of the year to 1.4. Two of the main reasons that I would do this are Variable

What is SIP jitter buffer how can i test it ??? ----PGP Signature-- Satish Patel mobile:- +91-9818875535 http://www.linuxbug.org --------------------------------- Get easy, one-click access to your favorites. Make Yahoo! your homepage. -------------- next part -------------- An HTML attachment was scrubbed... URL:

I'm assuming asterisk does not have a SIP jitter buffer in place? Any ideas on how to help with this going over a data T1 where VoIP is shared with regular traffic? Problem is when people are downloading the voice is jittery, even lossy. Matt

Hi Jean-Marc, Thanks for your response. Given a worst case scenario, what is the "worst case" latency (in terms of Speex frames) that the jitter buffer algorithm will incur? We're trying to determine the worst case hard number. Sorry for unclear question below; what I was trying to ask is that given a worst case latency (which I'm asking in the first question) inherent in

Hmm, I tried... I completly understand an idea of jitter buffer and I know there is a lot of kinds of this solution (eg. AJB - Adaptive Jitter Buffer). I simply want to know what type is used in speex codec and how could I use that. What is the reason for using jitter buffer implemented in speex against to my own (implemented at lower layer - transmission layer - eg. rtp). Kapul On Tue, Sep

Hi, I really want to start using 1.2.5, but I also really need to have the jitter buffer. Can anyone offer a suggestion of how to go? I've looked at the SIP_JB patch and there seems to be no indication of a patch for the 1.2.5 release.

Good question. I'm coming to the conclusion that using plain UDP and "home-grown" packet construction for transmitting the speex data (with timestamp/sequence counter) and implementing jitter control on the receiver end is an adequate implementation for a VoIP application. Assuming of course that I don't care about any interoperability issues with other applications etc. I was

Hi All, I have a question regarding the nominal jitter buffer configuration: The call was setup as G.729A (annexb=no), ptime=20ms and nominal jitter buffer size = 50ms, and round trip delay is 200ms, the TDM side will experience intermittent one way voice during the call, but IP side can always heard the voice from TDM side. My question is, should this possible caused by the nominal jitter

Hi, Our project is using the jitter buffer feature built in Speex. We noticed there are some latency when using the jitter buffer. Does anyone know what is the "worst case" latency inherent in the jitter buffer algorithm? I believe someone already mentioned that it's adaptive but is there a worst case hard number (in terms of 20ms Speex frames)? I'm not familiar with the

I use the speex version of your jitter, and in speex_jitter_get, you always call the jitter_buffer_update_delay. -----Original Message----- From: Jean-Marc Valin [mailto:jean-marc.valin@usherbrooke.ca] Sent: dimanche 18 mars 2007 13:06 To: Ouss Cc: speex-dev@xiph.org Subject: Re: [Speex-dev] Problem with the svn jitter buffer > I think that the new Jitter Buffer have a problem. > >

Greetings list, Some time ago (probably about a year ago now) we disabled IAX jitter buffering on all our boxes because it was causing issues in a mixed 1.0 and 1.2 environment. One thing I've noticed over the last few months as more and more clients have moved from the 512k/1mb/2mb ADSL connections they were using onto "up to 8mb" connections is that whilst overall throughput is a

Hi Jean and Steve, Can you tell me whether the jitter filter / buffer is adaptive type, I saw the description of speex_jitter.h say it is "adaptive", anyone of the group has implemented it and confirm it. Thank you all. Regards, Danny Chan -----Original Message----- From: speex-dev-bounces@xiph.org [mailto:speex-dev-bounces@xiph.org] On Behalf Of Jean-Marc Valin Sent: Tuesday,

Hi List, I have a question regarding jitterbuffer in Asterisk 1.4.24. I see that jitterbuffer is only effective on the receiving channels. My asterisk has only SIP accounts + 2 SIP trunk accounts to our branch office. Questions: 1. To enable jitter buffer on SIP channels it seems I have to enable and force it, right? 2. If I enable and force jitter buffer, Asterisk would always have to stay

Since r12660, the speex_jitter_get with high latency doesn?t works, I have no sound. Before this release, the speex_jitter_get works in all conditions. speex_jitter_get return void, then I cannot know the reason of this problem. Regards Ouss -----Original Message----- From: Jean-Marc Valin [mailto:jean-marc.valin@usherbrooke.ca] Sent: dimanche 18 mars 2007 23:07 To: Ouss Cc: