similar to: GXP-2000 w/ 1.1.0.11 firmware

Greetings all Grandstream released a new firmware and it seems like the speaker phone problem has been fixed. However we updated to firmware 1.0.1.12<http://1.0.1.12>to fix the echo problem but found other problems were now created. The worst of these new problems is that the whole phone starts degrading, the volume starts getting lower and lower. The ringing starts fading and the calls

I have upgraded the GXP-2000 to the newest firmware 1.0.1.12<http://1.0.1.12>and the phone is much more usable However, I still have two slight sound quality issues: 1) There is static on the line at all times. It is not that noticable to me, but when I make calls out the PSTN the person on the other end hears it. If I use a Cisco ATA with an analog phone and call the same person again

Hi all Slightly OT but I know a lot of GS experts hang out here - I just upgraded a GXP-2000 to firmware 1.0.1.13 to try out the BLF functionality with Asterisk (which so far works as expected), but as a side-effect the phone won't sync with an NTP server - I've tried different server names (time.nist.gov and pool.ntp.org) and IPs in the config, but it refuses to update the time on

Greetings all I was wondering if any of you have found this problem. I have a setup with 80 GXP-2000s which work great until I decide to stop now my asterisk server. When it comes back up half of the phones (not always the same ones) fail to register with Asterisk. I set up the phones to register and send keep alives (register every 4 minutes, send keep alives every 20 seconds) to no avail.

FYI, spoke with Grandstream this morning, the GXP-2000 release has been delayed again. Looking like April now before these hit the street. -- Cory Andrews Senior Partner VOIPSupply.com +++++++++++++ V: 800.398.VOIP X22 F: 716.630.1548 E: Cory@VOIPSupply.com

Is anyone else having an issue with GXP-2000s and transmit gain? All my other phones are fine on my TDM400P with txgain set at 0, but the GXP-2000 caps at about a third of the scale in ztmonitor. I'm getting people complaining they can't hear me on my GXP-2000s, whereas my Snom 320 and Polycom 301 are great, and my Budgetones are overmodulating. Is there any conceivable fix on the

Hi, I have a lot of GXP-2000 phones not registering with Asterisk server. After two days of attempts, it seems that problem is due to the fact that phones and server are not on the sme network. Do you know if this is known issue? -- Domenico Viggiani

Guys. I just downloaded the recent firmware for GS GXP 2000 and I must say the phone works great but... How do you make the conf button work?????? Anybody done that? Also, with great dissapointment I must ask, where is ILBC support? GS web page mentions it and the manual says it supports it almost using bolds :) soooooo where is it???? Any light on this?

I have a client with 20 GXP-2000s. Everything seems to be working fine. However, after a couple of weeks of use, the client is having a hard time adjusting to the new IP based phone systems and only misses one feature from their old Lucent system. That is, they had 8 analog lines before and all their old Lucent phones showed a button for each line. So, it was easy for anyone to say,

Hi When I make a call with the Grandstream GXP-2000 through Asterisk (and SER) to landline using VSP, after I hang up the call the other party are still connected for another 30-40 seconds. I've notice that the SIP BYE is sent to Asterisk, but Asterisk sends no SIP BYE on to VSP. When I use the SPA-941 the call terminates on the other right away soon as I hang up. I have updated the

I'm using a few GXP-2000 with firmware 1.0.2.13 and everything seems to be working fine. However, there are a couple of issues I'd like to know if are possible: 1) Even though the phone has 4 line appearances, if I am speaking on a line, the phone can no longer receive phone calls. I can manually select another line and make calls, but when Asterisk tries to send a call to it, I

I have about 30 GXP-2000 phones running 1.0.1.9 which have all been configured using the provisioning feature so the configuration is all identical. The problem I am having is that they randomly seem to stop registering with asterisk. When they stop registering they can still make calls but oviously asterisk cannot ring the phone so all incoming calls go to voicemail. Has anyone else had similar

Hi, I'd set the daylight saving option to yes on all the GXP-2000 phones, but apparantly it doesn't move it an hour back on last sunday of October. So now I am stuck will all the phones showing the wrong time. Isn't there an option so that it'll automatically update daylight savings? Thanks -- Zeeshan A Zakaria -------------- next part -------------- An HTML attachment was

Hello I'm about to order a GrandStream GXP-2000 and a Linksys SPA-921 I'd like to have some user feedback about how those phones perform, and whether their LCD screen displays both the caller ID name and number (The GrandStream BT-100 only displays numbers, which isn't very helpful). Thank you.

Hi folks, Just a quick question. Does the GrandStream GXP-2000 phone support presence (hints)? Cheers, Richard. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060109/26c4a63c/attachment.htm

I've done some googling and searched voip-info but I'm not able to find a good answer about how to provision the GXP 2000. Based on questions I've asked before it seems like a lot of people are using the grandstream phones so I figure provisioning can't be that hard. Is everyone using the web interface for *every* phone? Or is there a better, more automatic, way? TIA!!! Thanks,

I have had 2 GXP-2000 for a while now and been slowly following the firmware releases made by Grandstream and am now up to 1.1.0.13. This version works really well on these 2 original phones (MAC's 00:0B:82:06:xx:xx), so I went ahead and ordered another 2 phones (MAC's 00:0B:82:09:xx:xx). One of these I upgraded to 1.1.0.13 (it came with 1.1.0.5) and pressed it into use. The Speaker

Can someone explain me attended transfer with Grandstream GXP-2000? Hitting TRNF button, I get: Dial number (BLIND) or Select line (ATTENDED) What's the exact meaning of 'Select line'? Thanks Mimmus

Does anyone know the secret to get the GXP-2000 Message waiting lamp to illuminate? Or can point me toward some docs that might explain it? Thanks! --Jeffrey -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060501/7ffc668f/attachment.htm

>From the usual place, http://www.grandstream.com/BETATEST/GXP2000/ Note, there are two (and it took me a bit of a while to figure out) images to be loaded. Copy the ...a.bin's and the .bin's to your http provisioning directory, and reboot. The phone _must_ load the .bin files before it understands the ..a.bin files. After it loads the first one, the phone does lock up with the