similar to: Voicemail indication on Mitel 52xx phones

We are using an Asterisk box to do conferencing right now. I have had about sixteen active lines in conference and the quality was acceptable. We now have a need for 50 people to conference at one time. Does anyone have enough experience doing this to give me some pointers. Will it even be reasonable to try this? Is the mixing done on the the hardware, I plan on using a quad span t-1 card from

I have installed asterisk on numerous servers. Every install was done on Fedora and (White box Linux). I now have zap channels in one of the boxes (T-1). No matter what type of channel I call on (sip or zap) I get some really strange artifacts in the sound, almost like a skip in the playback. It seems to always be in about the same place in the recording. Usually in the beginning of playback. For

I have had a lot of complaints about the time it takes to setup a call. I have timed it and it is almost five seconds before it even starts ringing. The SIP device sends the request almost instantly but the channel is taking a long time to pickup and dial. It wouldn't be so bad but they hear nothing. I would like to provide ringback before the zaptel actually starts ringing the channel. Has

I agree with these fella's, this is a piss poor way of fixing it. I only know of one call center that used static agents, mostly because they were sold a peice of crap and they had no idea how to use it the other way. I think you will find the majority of call centers are callback centers. This decision has taken Asterisk out of the realm of providing reasonable call center solutions. VIVA

I have compiled zaptel on Mandrake following everything I have always done on Fedora. It is 2.6 udev so... I had to modify the 01-devfs.rules Make linux26 Make Make install... Everything appears to compile correctly but it says module not found when doing "modprobe zaptel" Is this a rights issue? Jordan Novak -------------- next part -------------- An HTML attachment was

On 6/4/07, Jordan Novak <jnovak@logisticshealth.com> wrote: > I am having a difficult time with the transition from agentcallback login... > Here are a few of the isssues, I am logging in using chan_ local > ie:local/8000 as the extension I'm not sure if this will solve any of your problems or not, but I've found it's often necessary to use the "/n" on the

Hi: Is anybody out there successfully using Mitel SIP sets with Asterisk? I hear they're not the most standards-friendly, and don't play well with non-Mitel switches. I have a pile of them and would like to see if I can use them, but not if it promises to be a hassle. -Stephen-

Hi: I've got a dozen Mitel 5020 IP sets and can't find out if they do SIP, or even find an administrator's manual for them. Mitel has been rather unhelpful. They only deal with "partner resellers." Has anybody used these with Asterisk? -Stephen-

I apologize about doubling these up, I forgot the subject! I have a cisco VPN from router to router over a Data T-1. The ping times are consistently 32ms with random ping responses of 295ms -408ms about every 30 secs to a minute, I have jitter buffer enabled. The connection goes like this... Mitel SIP phone to Asterisk A, IAX trunked to Asterisk B and then T-1 to a PBX, the calls are internal

Hi, folks: I've come into some Mitel 5020 IP phones. A client has made a significant investment in them and we want to see if we can use them in a new system. Are these even SIP sets? I haven't been able to find out. Mitel's site barely covers them (I was only able to find some user guides, which are effectively useless; they say nothing about configuration and provisioning). Has

We are attempting to configure SIP trunking between asterisk 1.2.22 and a Mitel 3300 CX box. The Mitel machine will gateway to the PSTN for us. I found this earlier post about doing this from July: http://lists.digium.com/pipermail/asterisk-users/2007-July/191630.html Unfortunately the promised configs never came ;(. We're having the exact reverse problem: we can register with the Mitel

I am looking at some directions on how to install and it is asking me to edit defines.php, it states that the file should be located in the source directory, but I can't seem to find it anywhere on my machine. Anyone been thru this? Jordan Novak Communications Technician -------------- next part -------------- An HTML attachment was scrubbed... URL:

Has anyone here had any experience with Mitel 5220 IP phones with Asterisk? Basic features are working good, but I'm looking for more advanced features like sending text to the display or having the lights on when an extension is in use via the hint subscription. Thanks.

hallo everyone, fyi ... working SIP Trunk configuration between Asterisk and Mitel 3300 ICP attached. let's refine further, please test and share your feedback, regards, Joseph Okoegwale Abuja, Nigeria -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070709/4f7f15e1/attachment.htm --------------

I have a problem which I need to resolve. We are trying to put an asterisk between a Mitel PBX and the world. We are adding Voip service via Asterisk. Here is are config files for the settings but our problem is the following. We are able to send calls to the Mitel pbx and it's the T1 connections is green saying it's ok. The support department from Mitel said that they use e&M and

Hi All, Our experience with * to date has been a bit limited. It's a 4xCisco 7960 network, linking our head office with a faraday caged datacenter. As a way of putting voicecomms into a sealed room, it was quick and easy to deploy, and works very well. As typically happens, we've now thought about extending the use of asterisk - and a new opportunity has cropped up. In three months

I'm setting up an asterisk server to extend several extensions from a mitel pbx. I'd like to display the caller id that I receive from t he mitel pbx on the sip phone. The mitel PBX person has setup the PBX to send be callerid, but I don't see it. I've set chan_dahdi up with usecallerid=yes cidstart=ring cidsignalling=bell callerid = asreceived cid_rxgain = 0.0 Are there

Hi, I finaly find enough legal stuff, from the French government recommandations, to qualify our CentOS KVM/libvirt as a platform we can use. By the way the legal advisory of KVM is not as the save level as its technical quality : Le 11/07/2018 ? 18:07, Jean-Marc Liger a ?crit?: > > Hi, > > Some Mitel products, which are CentOS 6.x or 7.x servers based with > some telephony

Hi all, Our company has deployed a Mitel 3300 system (only about 2.5 years ago) and we are experimenting with setting up Asterisk in our head office (for business continuity, ie we have a bird flu epidemic and no-one can come in, therefore use SIP softphones at home to co-ordinate activity) and at a remote site in the Isle of Man (connected via 2Mbps SDSL) Ideally we'd like anyone on either

Is there an app or softphone for meetings that displays the hosts screen like webex or intercall. Jordan Novak -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060321/df90d527/attachment.htm