similar to: echo in Snom 360 phones

I'm trying to get call parking working with the lighted buttons on the SNOM 200. I have set the 5 buttons to "Park Orbit", for extensions 700-704. Pressing the first button (x700) does park the call. However, the remaining buttons (x701-704) don't allow me to pick up parked calls, or show parking status via the LEDs. I can only pick up parked calling by manually dialing the

With Asterisk 1.4 I could use commands like: /usr/sbin/asterisk -rx "sip notify reboot-snom mjc_home" to reboot a snom phone. Now, with 1.6, when I try that, I get: Unable to find notify type 'reboot-snom' Command 'sip notify reboot-snom mjc_home' failed. Do I need to add some magic to sip_notify.conf? I haven't quite figured out how to make it work. - Mike

Good day all I have asterisk on a box with one network card I have a 2 companies setup on the system. To keep all apart I binded a different ip to the interface,i,o,w eth0 192.168.0.254 and eth0:1 192.168.1.254 And in sip.conf I took the bind setting out So each company's phones are on a different ip range,and all worked well So we decide to pull the snom190 out and exchange it with a snom360

Is anyone using the SNOM 360 as a reception console with Asterisk? We are trying to have the ability to view whether an extension is on or off hook, or ringing with the Snom, which seems to work fine. The issue is that we are having difficulty picking up calls and transferring. Anyone have experience / insight? Darrell S. Long Director of Technology BestWeb Corporation Phone 877-777-2932

Hi, I want to pick up a call with the snom's programmable buttons(snom190 -SIP 3.60x, snom360-SIP 4.1) with asterisk server (v 1.2.0), I tried with the option 'Destination' and when the incoming call arrive to another snom phone the button blinking. In this way I can only pick down it pressing the blinking button. The solution is call the *8 or parcking the call but my pbroblem

Hi, I am using SNOM phones with Asterisks for few years. They used go occasionaly NR, and I would reregister them from the phone web interface. But it started doing frequently for last few months. Here are SNOM Phone and the firmware version; snom190-SIP - Version-Code: snom190-SIP 3.56m snom320-SIP - snom320 jffs2 v3.36 snom300-SIP - snom300-SIP 6.5.2 Asterisk version - Asterisk

Hi all, I'm running 1.6.2.0-rc6, and I'm running into a problem: sometimes the audio vanishes in the middle of listening to an IVR background prompt. This happens with both analog (Digium card) and IAX2 incoming calls. The prompts are stored in ulaw format (and the IAX2 calls use ulaw). The asterisk console claims that the IVR prompts are proceeding in the expected fashion, but I

Hello Although not stictly a asterisk issue, any help would be apreciated. Firstly a few notes on the snom 360, which I have had on a test bed for the last week. Its a great phone, with a good user interface, both physically and its web based one. At its lastest firmware it does have a few quirks, with regards to the way it handles usernames and passwords on the physical interface. These have

Hi, Is it possible to use the hint priority to allow call parking slots to be monitored on (for example) Snom indicator lamps? How do you refer to the slots (i.e., what is the "channel") in the hint? - Mike

Hi all, I currently have an Asterisk test server behind a TZ170 Sonicwall firewall / NAT box, with several DIDs. I've found that inbound IAX2 calls don't work reliably (i.e., I get a busy tone) unless I enable "Use Consistent NAT" in the Sonicwall. This feature is poorly documented by Sonicwall, so I thought I'd pass it along. Has anyone else run into this, or figured

Has anyone got this annoying sidecar to illuminate when users are on the phone? In my function key settings I have: Context: Active Type: Extension Number: <sip:4000@serve.address.com;user=phone> (4000 is the extension I want to see/dial on the key). I can press the key and it will dial the extension, it just won't illuminate when the user is on the phone or on DND Since I have

I have a client that has 5 Snom 320s. 4 work great, one does not. I upgrade the firmware to the latest (6.5.2) and the problem goes away, but then comes back a couple days later. There is a slight packet loss on the phone (about 1%), though there is no packet loss on any of the other phones. I determine the packet loss by the Linux command "ping -f -c 10000 192.168.2.10". Outgoing

We have a large install of 360's running rev 4.1 with zero problems. I did another, smaller install couple weeks ago with 40 360's running rev 5.3. In both cases, the install was identical, same Asterisk version, same dialplan, everything the same except the differences were: 1. Different firmware rev 2. Different physical LAN Guess what? On the smaller install, lockups and reboots.

Hi, everyone: I'm in the processing of deciding what IP phones we should use with our Asterisk server, and I wanted to get feedback from the user community on the quality, reliability and ease of operation of Snom phones. What do you have to say about these phones? Are there other phones you'd suggest along with or instead of Snom? Thanks, -Stephen-

I recently got a SNOM 360 and have been trying to get the extension lights to work. I can see the subscriptions with sip show subscriptions but I don't see any notifies when a call is made. I must be missing something because I've tried looking to see if anyone else has had this problem but the only solutions I've seen have been to put hints in and I have those. Any suggestions?

Hey Everyone, i am using Asterisk 1.4.21.1 with a old Patton SN1400 and some SNOM 300,320,360 Devices. In the combination with asterisk and the patton, there are occuring some strange behaviour, due to the calling and answering everything works good, clear voice, great availability. All the devices have to use ulaw, alaw and slinear is available but never the first choice since i use my

Hi every body, can someone please tell me about a SIP phone that support more than 10 extension (free or not free ;) ) wich will be used in my company, i've bought a SNOM but it just support 5 sip extension Kind regards

We recently deployed 10 SNOMs as part of a PBX hosted solution. We have one phone setup as the receptionist phone, using hints to show busy office lines. This all works as expected. This is a new installation, and people are just starting to setup their phones. For those of you not familiar with SNOM phones, there is a row of keys on the right side of the phone which SNOM calls function keys. In

Anyone have a Snom they're happy with? How did you manage that? :) I have a system of: Asterisk 1.2.3 2 Wildcard TDM400P Rev I and E/F 1 Snom 360 + sidecar ~15 Sipura/Linsys SPA-841 ~15 Grandstream 101 Everything (currently) is on the same network, not a router to be seen between any two. Also everything, except the snom, is working sweetly. The main problem is ECHO.. awful echo and

I have a preoblem with my snom 320 phones. I have 5 snom phones installed and all of them have 5.2 firmware. All have same settings in the advanced panel. On 2 phones when I press the hold or transfer key nothing happens and * does not start the musiconhold. In the The hold and transfer keys are set as F_R and F_TRANSFER correctly as the others. Other snoms and gxp-2000 work ok. Any ideas?