similar to: 2 analogue ports on an Alcatel PBX patched to 2 FXO ports on my *

Hello Fellow Users, This is my first post so please be kind :-) I am using asterisk@home <mailto:asterisk@home> with freePBX talking to an Alcatel 2400 analogue port via a Digium TDM01B - 1 FXO card I can make calls into the asterisk by dialling the asterisk extn number from the 4200. I can dial extns on the 4200 from asterisk by dialling 9(4200extn number) if I don't have any

Hi all: We are looking for someone with experience in Alcatel PBX - PRI - Asterisk integration Please get in touch off list.. We're wanting to hire a professional subcontractor, developer or company to get around some issues like these: Asterisk shows PRI to Alcatel is up, but when trying to dial from Alcatel to Asterisk results in a disc tone (Asterisk do send calls properly into

Hi, Does anyone have any experience connecting asterisk to alcatel 4200 series pbx with bri cards? Does it should work with asterisk bri in NT mode, and alcatel bri with TE mode? Cheers, Igor Neves.

Hi guys, I have an Alcatel 4200 with a ISDN board pluged in the asterisk server with TE110P. Input calls VOIP Proider ---> Asterisk ---> Alcatel Output Calls VOIP Proider <--- Asterisk <--- Alcatel In alcatel phones, users should dial 2 for take a line tone and can dial. At this point start my problems: 1. When users dial 2 on phone (alcatel) they don't received a dial tone,

Hello, I have connected asterisk box with legacy PBX Alcatel OmniPCX 4400 (and also another * box connected to A4200). These PBXes have function to assign name to extensions and display it on phone. Asterisk box is connected via PRI with euroISDN signalling (also I have tried QSIG). Is it possible to set callerid with name and display it on alcatel digital phones? With command SetCALLERID

Dear All, I seem to have stumbled across an AGI problem; I have written an AGI Script (bottom of this email); The script does the following; Makes a CDR entry when called Records the call Updates the CDR Finds a corresponding DNIS from the SMDR table (captured via a serial port logger) Matches up the record and updates the CDR. The script works perfectly in my test lab and has been doing so

if i go off hook and dial 666 from an internal sipura spa-x000 (at extn 141), it rings straight through to extn 666. using the same dialplan, from a cisco 7960 with 7.1 sip code (at extn 142), i have to go off hook hit NewCall punch 142 (or any valid extn in the dialplan) hit Dial then dial 666 wtf? sip.conf for crisco [fiji] callerid="crisco" <142>

Does anyone have any input into integrating asterisk with a alcatel 4400 PBX. Acording to what i've found is that Alcatel uses R2 for E1 -- regards Vikram (http://www.vicramresearch.com)

Hello, For a prospective customer, I need to evaluate the cost of an Alcatel OXE IP trunking licence price. The setup would be: PSTN -----<E1>---- Alcatel ----<SIP>----Asterisk ---------- SIP Phones At the moment, only a couple of simultaneous calls are needed between Alcatel PBX and Asterisk but later, this number will grow.

On 12/25/2014 01:43 PM, Ady wrote: > >> >> >> On 12/25/2014 04:33 AM, H. Peter Anvin wrote: >>> On 12/24/2014 12:16 AM, Robert Yang wrote: >>>> Hello syslinux, >>>> >>>> Merry Christmas! These patches will make extlinux work with umounted >>>> ext2/3/4 filesystem, for example: >>>> >>>> $ extlinux

Are there any Snom 200 users that have two extns defined on their phone? I've been trying to get two (or more) extns defined in such a way that when extn #1 rings, LED #1 flashs; extn #2 rings, LED #2 flashes, etc. (Answer greating will be different depending upon which extension is called.) I can get multiple extns to register and work with * just fine, but regardless of which extn is

Hello everybody, I just buy a X101p clone and i'm new in asterisk. Here is my configuration : ISDN line ---- Alcatel ----PSTN ext 68-----Asterisk with X101p clone ------sip phone ext 200 - 203 ||| ISDN phones ext 60-67 >From sip phone to ext 60-67 it works. 9+extnumber >From sip phone to Land lines it works. 9+0+phone number >From ext

Does anybody has experience with the SIP phone of Alcatel the ST280. I can't make a call with this phone. Everytime I make a call I get the error Jun 12 19:38:38 WARNING[1133718080]: chan_sip.c:497 retrans_pkt: Maximum retries exceeded on call 5624@81.124.191.47 for seqno 1 (Response)

Hello, Since upgrading from asterisk 11 to asterisk 13 (I have tested up to the latest 13.16.0 release), we have a problem with attended transfers to an alcatel pbx in which the call being transferred still has music on hold even after the transfer has completed. Is this a known issue? Any new flags that need setting, etc? Thanks Jason -------------- next part -------------- An HTML attachment

> > > On 12/25/2014 04:33 AM, H. Peter Anvin wrote: > > On 12/24/2014 12:16 AM, Robert Yang wrote: > >> Hello syslinux, > >> > >> Merry Christmas! These patches will make extlinux work with umounted > >> ext2/3/4 filesystem, for example: > >> > >> $ extlinux -i /dev/sdXN > >> or > >> $ extlinux -i file_block

Hi guys, Recentlly i did a asterisk gateway and use it with an alcatel pabx. All is working, i have only two problems. 1. When call incomming to asterisk, it forward to digium card to PABX Alcatel. The user that start the call can't hear the control tone of ring ring ring. Tha calls stay without sound until the called part answer the call. At this point, conversation follow normaly. 2. When

Here is the current dial plan section: [custom-michael] exten => _900,1,Playback(custom/extn-xfer) exten => _900,2,SayDigits(${EXTEN}) exten => _900,3,MixMonitor........... exten => _900,4,Dial(SIP/${EXTEN}|${DEFRT}) exten => _900,5,Playback(custom/extn-xfer2) exten => _900,6,Goto(custom-michael,901,4) exten => _901,1,Playback(custom/extn-xfer) exten =>

Hello everybody I have an asterisk with an integration of alcatel pbx, by sip trunk, all calls are fine, but tha calls calls that originate from a analog line, the recipient is not listening, and that if they hear the call originates, the lines are E1 in alcatel pbx. When a asteris user call to analog line the call is ok. Everyone, has been that problem? I change asterisk version 1.4.21 to

Hi, I'm sorry if this is already asked somewhere on the list but I couldn't find it. We have an old PBX system controlled by our Telecom provider. There are analog phones but also digital alcatel phone's connected to it. These are not ip based but legacy digital phone's. Is there a way how we can connect them to our own Asterisk PBX? The old PBX is going to be removed, so it has

> Hello syslinux, > > Merry Christmas! These patches will make extlinux work with umounted > ext2/3/4 filesystem, for example: > > $ extlinux -i /dev/sdXN > or > $ extlinux -i file_block > > Also it can work with something like: > $ extlinux /dev/sdXN --reset-adv > or > $ extlinux file_block --reset-adv > Thank you. The 'extlinux' command