similar to: TDM2400P

A big G'day to everybody on the Asterisk list. I am having a lot of trouble getting the TDM2400P card working in asterisk. I will give the important details below, please let me know if I am doing anything obvious or ideas for debugging this. SUMMARY: I get the right voltages on the line with the phone on or off the hook, but no dial tone, no ringing in or ringing out. INSTALLATION AND

Hi all, I'm confused, in digium website, it says: TDM2400P: It supports a combination of up to 6 FXS and/or FXO modules for a total of 24 lines. 6 plus 6 is 12, how come it's 24? if I have 24 PSTN lines, i'll be needing 24 FXOs. Pls. elaborate. thanks. Lito -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi i have a tdm2400p and installed asterisk 1.4.11 with zaptel 1.4.5 im having an error message when in running asterisk with the tdm card in. here's the error from the console of asterisk: [Nov 18 10:30:44] ERROR[5557]: chan_zap.c:7489 mkintf: Unable to get span status: Inappropriate ioctl for device [Nov 18 10:30:44] ERROR[5557]: chan_zap.c:10466 build_channels: Unable to register channel

Hi, I have a box with Debian Sarge, Asterisk 1.2.1 (and zaptel 1.2.1) and a TDM2400P with echo canceller. I installed the card but no echo cancellation is being made...seems like the echo canceller module does not work, infact the software cancellation is working. My zapata.conf has echocancel = 128 and echocancelwhenbridged = yes but no echotraining parameter which gives a warning. I found

Hi, I'd like to change 3 TDM400p with one TDM2400p to avoid echo (my intention is to use a TDM2400P echo cancel module). It TDM2400p working good with asterisk 1.2.1? Or I need to install a new asterisk version? TIA Giorgio Incantalupo

For example, how much power would a server with 3 of the TDM2400P fully loaded cards draw? We're trying to figure out what APC power we should have to achieve approx 30 minutes back-up time. Would appreciate any learnings or methods on calculating the power draw and determining the appropriate back-up device. Thank you. Melisa.

I am having issues with a TDM2400P. It appears when the ZAP channel dials out, it randomly chops the first digit off of the number. I have tried relaxdtmf=yes, turning up and down the txgain, turned off and on the echo cancellation, generated new zaptel (with updated spinlock.h)... I am at a loss. Can someone please offer some help? Thanks. TJ

Hi list, I have this problem: when someone is making a call, with asterisk and a TDM2400P connected to 8 fxo lines, the sound is good, but if three, for people are calling at the same time the sound got worse and worse. Using other voip cards the sound is much better even with all user calling at the same time. What can be, the problem? Someone else has having the same

Hi, I have a problem with TDM2400P card. The card is detected ok, I can make a call but only with pulse dialing (not tone dialing) without hear sounds from the headset. When I receive a call, I can to establish a communication, but without hear sounds from the headset. When I dial any phone key, I can hear dtmf tone. I'm using Elastix 1.5.2. These are my configuration files:

Hi, I cannot make my TDM2400P (with Echo Canceller module) detect faxes. I tried with a TDM400P and it worked at 80% (20% of faxes were lost). My test conf.files are: _zapata.conf_: context = inbound faxdetect = incoming language = it musiconhold = default signalling = fxs_ks callerid = "call_or_fax" channel => 1 extensions.conf: [inbound] exten => s,1,Answer exten =>

Do the zaptel drivers need to be told >NOT< to use the software echo canceller when using a TDM2400p card with hardware echo canceller, or does the driver figure this out by itself? Thanks, Andrew -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061117/7dc52295/attachment.htm

Hi Francois, Thank you for your interest. I tried the card alone so I don't think is an IRQ problem (anyway is there a way to be sure?) To be sincere, in all systems I saw (even working ones) there is an IRQ balance failed where Linux boots. The system is new, I tried different processors (P4 and Celeron) with SMP kernel and without. The card has the echo module, could not be

hi you, I'm having problem with voice quality on my trixbox using TDM2400B.The trixbox is connected via 20 FXO ports on a TDM2400 with the hardware echo cancel module. Echo cancel almost works, but the users hear what they describe as a 'background crackle/buzz' coming back when they talk. anyone have the same problem? pls help me. thanks a lot. my trixbox and config

How many TDM2400P cards can I safelly install in one PC? I'm loking for answers from whoever has a working scenario with * and a number of cards higher than one. Thx, Juan __________________________________________________________ Mensagem enviada usando o Webmail da ViaLink ver. 2.7.8

Hi, I'm installing an Asterisk box with a TDM2400P in Brazil. I can make analog phones work while lines are not working. Since I do not know anything about brazilian lines, is there anybody who can tell me what is wrong/missing in my conf files (below)? TIA Giorgio _zaptel.conf:_ fxoks=9-16 fxsks=17-24 defaultzone=br loadzone=br* * _zapata.conf:_ context = inbound_zap echocancel = 128

Hi All; To overcome the echo problem, what mainly I have to do in the configuration other than the following line in the system.conf under dahdi directory? echocanceller=mg2,1-16 1) How can I know if the digium card supporting echo cancellator? 2) If I am getting a message in the consol that unable to enable the echo cancelator, then what does it means? The hardware is not supporting echo

I have an Asterisk box running Fedora Core 4, Asterisk 1.4, Lippri, 1.4, and Zaptel 1.4 The Digium cards installed are TDM2400 and TE110P. Everything was working fine until I upgraded to zaptel 1.2.12 from 1.2.9 Now when I run ztcfg I get the following error message: (CAS signalling on span 2 conflicts with Clear channel on channel 40) --NOTE: signaling was spelled wrong in the error

I'm going to install asterisk with four digium cards. Can anyone mention a brand that carries boards with 4 compatible pci slots? Thanks Shoval Tomer, IT Manager, SofTov Advanced Systems, Ltd. Office: +972-3-9230686 ext. 179 Fax: +972-3-9216642 Mobile: +972-54-8000200

Hi, At one location we have a user whose Polycom IP430 suffers from erratic reboots. We swapped his phone for a brand new one, but the problem remains. Has anyone seen that?

I have a client who wants a Meetme box with 12 FXO ports, to connect to Analogue lines coming from an Ericsson PBX. It looks like I could do this with four different hardware configurations: a) three TDM04B cards (based on TDM400P) b) one TDM04B and one TDM808B c) one TDM804B (or TDM854B?) and one TDP808B d) one TDM2403B (half filled TDM2400P) Apart from considerations of cost and PCI slot