similar to: chan_modem_i4l delay

Hi, I currently use Asterisk 1.0.7-BRIstuffed-0.2.0-RC7k on a debian sarge with a kernel 2.4.27 on a P4 3Gig with 1Gig of memory When i use i4l on any call, the called party ( on the telco operator side ) ear me with a delay of 1 sec after 1 minutes , 2 sec after 3 minutes and so on... After a quart hour, the delay make the conversation just impossible !!! I use a tdm400P to connect my analogs

Hello all, I currently have an Eicon Diva Client isdn card using i4l. Outbound dtmf doesn't work (and never has), but there has been an annoying problem with false dtmf detection in calls (that could be triggered easily by blowing into the receiver on the remote end). I looked through the list and found two patches that need to be applied - 1 to isdn_tty.c in the kernel, and another to

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I'm having some problems using the asterisk modem driver with an ISDN4Linux card (AVM Fritz). (I realise that it's better to use CAPI, but unfortunately this card doesn't have any CAPI drivers). Every so often the ISDN just stops working (it neither dials out nor accepts incoming calls). Trying to dial out just logs: --

Hello, I just got my isdn-card working together with i4l and asterisk. Everything seems to be working fine: I can accept calls coming from the outside and I can dial out. Even setting the msn works like charm but my problem is that I cannot hear a word. There's complete silence in both directions. Any idea what could be the cause? Thanks for your help, Gunther Lspci: 0000:01:07.0 Network

Hi, I am using Asterisk on a DSS1 ISDN-BRI with ISDN4Linux (and a Fritz Card PnP). The ISDN-BRI is in PTP-Mode (Point to Point "german: Anlagenanschluss") which is enabled within I4L with "hisaxctrl fcpcipnp0 7 1". Everything works fine except that I can not see the called number/MSN of incoming calls within Asterisk and because of this I can not route incoming calls

Hi all, this is a rather "newbie-oriented" question, so please bear with me... The system running Asterisk has been provided with an AVM FRITZ!Card PnP. SuSE Linux 9.0 recognizes it right after booting the system and it seems to be configured (MSN) correctly... The hwinfo looks like this: --- pbx:/etc/asterisk # hwinfo --isapnp 11: ISA(PnP) 01.0: 10300 ISDN Adapter [Created at

Hi to everyone! I am new to this list and i want to greet you all! I am trying to install Asterisk on a Fedora Core 3 Distribution with a Digi Datafire Micro V ISDN Card. I know that I have to use the ISDN4Linux so in modem.conf I set the I4l driver ,the msn and device. Modem.conf [interfaces] context=remote ;driver=aopen ; modem by AOpen driver=i4l ; isdn4linux - an

Hello, I'm trying to understand why when I make a call from a SIP phone to an external number who has an IVR system in which I've to choose some options using the dialpad, it does'nt recognise the key pressed and remains still waiting for my choose. I'm tryng using Grandstream 102, and i've tryed with all the 3 modes possibile: Dtmf inband, rfc2833 and INFO (obviously

Hi, I have read the wiki entries on IAX(2), but I'm afraid, it still have some questions: I have a working connection between two Asterisk-Servers (Asterisk 1.0.7-BRIstuffed-0.2.0-RC7k on Debian 3.1) via IAX. Does this connection work with IAX or IAX2? When I try to load chan_iax2.so, I get the error message chan_iax2.so]Oct 11 10:09:52 WARNING[2288]: loader.c:258 ast_load_resource:

Hi, i have a debian-system with the asterisk 1:0.9-1 packages and chan-capi 0.3.1-2 installed. My chan-capi seems to be out-of-order. Capi and I4l work in general. I can use isdnlog and capi4hylafax. Using chan_modem_i4l with the sam context work fine too. But no incoming calls are answered by asterisk over chan-capi. If have 2 isdn-card: a passive avm a1 (i4l/hisax) and a active avm b1

Hello, Does anyone know what driver to use with an "Eicon Diva Server 4BRI" card? My modem.conf: -------------- [interfaces] context=remote driver=i4l msn=16453 device => /dev/ttyds01 -------------- I get the following error: -------------------------- == Loading modem driver chan_modem_i4l.so => (ISDN4Linux Emulated Modem Driver) WARNING[8192]: File chan_modem.c, Line 383

Hello all, This new version (0.6.1) of asterisk-oh323 fixes the "one-way audio" problem of the previous release. Download from the usual location: http://www.inaccessnetworks.com/projects/asterisk-oh323 Regards, Michael.

Hello! Im pretty new of asterisk world: my goal would be using iaxcomm to call ppl over POTN. Yesterday i configured asterisk to be able to hear a song (with Playback() command) with iaxcomm, and it was wonderful. Now, today i tried to configure asterisk to use my ISDN4Linux supported card (a plain HFC card) with asterisk. i configured modem.conf this way, after reading

Hi all, I'm new to asterisk and not too knowledgeable on ISDN, so please be gentle :) I have a dual-channel Eicon Diehl Diva card in a Debian Woody box with kernel 2.4.27, connecting to a Telstra (Australia) Onramp Home Highway ISDN line. I'm pretty certain the card and line both work since they've been used in this machine for PPP before this (but with an older kernel with DoV

All, Currently I've got my Asterisk machine running smoothly on IP bases. Meaning I can reach all phones or softphones within my LAN or remote LAN's via VPN. The next step for me is connecting it to the PSTN network. After some tweaking with the modem.conf I got the i4l driver running correctly, and it appears that my Fritz! ISDN v2 card is working correctly. I have added the

I have asterisk loaded and seemingly working with 4 snom 200 phones. I cannot dial in or out using a DIVA isdn card When I dial out i get "not found xxxxxxx" on the handset. When I dial in i see in /var/log/message isdn_net: Incoming call without OAD, assuming '0' isdn_net: call from 0 -> 0 1856 ignored isdn_tty: Incoming call without OAD, assuming '0' isdn_tty:

I have a North American BRI configured as National ISDN (NI-1) on an SBC (Nortel?) switch. SBC calls this "FastTrak ISDN", and it's surprisingly inexpensive -- less than two POTS lines. I've been trying to find an inexpensive PCI interface solution to connect this to Asterisk as voice lines. I prefer ISDN BRI over POTS lines because of the improved signalling, fast dialing,

Hi, I'm trying to get asterisk running on kernel 2.4.20 however trawling through the archives I've found a few references to patches to remove i4l's dtmf detection, but have been unable to find the patch itself (I think it is isdn_audio.c). Can anyone point me in the right direction? The problem I'm seeing is connecting a SIP softphone (tried a few) to an external number via an

Hi, I'am having some problems with new mainboards and 3xHFC-S cards. The the first problem was with interrupts, I mean if HFC-S card was using interrupt i.e. 21 or higher - it didn't work. Solved by disabling APIC. However, still the driver behaves a little bit strange. If card 0 & 1 is TE and 2 is NT, TE works fine, but NT is not working at all. If card 0 is NT and 1 & 2 TE - all

Hi I have installed the http://asteriskathome.sourceforge.net/ with a Digium card with no problems, very good ! Now I want to install my Billion PCI ISDN card (HFC based) in TE mode. I get a little confused with Isdn4Linux, ZapHFC HIAX and the need to install Capi ! Please suggest best and easiest approach ? Thank you ! HB Norway