similar to: RXgain

I have had a lot of complaints about the time it takes to setup a call. I have timed it and it is almost five seconds before it even starts ringing. The SIP device sends the request almost instantly but the channel is taking a long time to pickup and dial. It wouldn't be so bad but they hear nothing. I would like to provide ringback before the zaptel actually starts ringing the channel. Has

We are using an Asterisk box to do conferencing right now. I have had about sixteen active lines in conference and the quality was acceptable. We now have a need for 50 people to conference at one time. Does anyone have enough experience doing this to give me some pointers. Will it even be reasonable to try this? Is the mixing done on the the hardware, I plan on using a quad span t-1 card from

I have compiled zaptel on Mandrake following everything I have always done on Fedora. It is 2.6 udev so... I had to modify the 01-devfs.rules Make linux26 Make Make install... Everything appears to compile correctly but it says module not found when doing "modprobe zaptel" Is this a rights issue? Jordan Novak -------------- next part -------------- An HTML attachment was

I have installed asterisk on numerous servers. Every install was done on Fedora and (White box Linux). I now have zap channels in one of the boxes (T-1). No matter what type of channel I call on (sip or zap) I get some really strange artifacts in the sound, almost like a skip in the playback. It seems to always be in about the same place in the recording. Usually in the beginning of playback. For

On 6/4/07, Jordan Novak <jnovak@logisticshealth.com> wrote: > I am having a difficult time with the transition from agentcallback login... > Here are a few of the isssues, I am logging in using chan_ local > ie:local/8000 as the extension I'm not sure if this will solve any of your problems or not, but I've found it's often necessary to use the "/n" on the

I am looking at some directions on how to install and it is asking me to edit defines.php, it states that the file should be located in the source directory, but I can't seem to find it anywhere on my machine. Anyone been thru this? Jordan Novak Communications Technician -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello. I have a MinITX motherboard with only one pci slot and one onboard ethernet interface, I have a TDM04B card plugged into that motherboard and the /proc/interrupts: CPU0 0: 169626332 XT-PIC timer 1: 1270 XT-PIC i8042 2: 0 XT-PIC cascade 8: 4 XT-PIC rtc 12: 170166219 XT-PIC eth0, wctdm 14:

I agree with these fella's, this is a piss poor way of fixing it. I only know of one call center that used static agents, mostly because they were sold a peice of crap and they had no idea how to use it the other way. I think you will find the majority of call centers are callback centers. This decision has taken Asterisk out of the realm of providing reasonable call center solutions. VIVA

I am using Asterisk to send Voicemail out as Email. I am running into a problem I believe to be caused by the exchange server requiring SMTP authentication. I cannot get the sys admin's to turn it off. Does anyone know enough about sendmail to help me. I am assuming that the default mail client is sendmail. It will also send to other non-SMTP authenticated servers. Your help is much

Is there an app or softphone for meetings that displays the hosts screen like webex or intercall. Jordan Novak -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060321/df90d527/attachment.htm

I am getting quite frustrated today, so please bear with me. I just installed Fedora Core 4 (was running RedHat 9 with a working Asterisk) now my Fedora does not appear to be recognizing my X100P (clone) at all. Hardware browser just shows them as unknown device. driver: hisax So, of course, my zaptel drivers do not work and therefore my asterisk does not work. any help would be greatly

Hello, I have configured my TDM01B Card (1 FXO Port ) as follows (below) but it will not pick up an incoming call. Any suggestions/tools to see what the problem is? I have looked at zttool where this line changes but I don't understand what it means (The last digit changed from 0 to 1) Total/Conf/Act: 4/ 1/ 1 /etc/zaptel.conf fxsks=4 loadzone=nl defaultzone=nl

I am looking for a way to allow a user to record a call simply by pressing a button or some combination of buttons on their phone. Is this possible? I have read the stuff about the monitor command; however, this doesn't seem to be very interactive for the user. Thanks, Andy -- H. Andy Goss Network Engineer Network Advocates Inc. Main: 502.412.1050 DID: 502.992.5933 Mobile: 502.387.8216

Hello - I have 8 polycom 501s all setup great using ulaw. We have put them through a pretty rigorous torture over the last 4 months, and they've performed famously. No dropped calls ever. We invested in some g729 licenses. changed my ipmid.cfg so that g729 is priority 1 and ulaw is priority 2. I added allow=g729 to my extension's sip.conf entry, where existed before disallow=all

I have three polycom 501 that are all hearing echo. The other party sounds fine but you can hear yourself rather well. The volume does help if lowered but that also makes the other party extremely quiet. Is there any way to control the gain of the mic or stop the microphone from picking up so much from the handset. It only happens while you are on the handset. -------------- next part

I am looking for completly wireless desktop phones. Until I realized we needed wireless i was going to use polycom soundpoint 501's. Any suggestions on a comparable wireless phone? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070328/88e22671/attachment.htm

Guys. I have an issue with a te110p card and also some tdm04b cards on the same system: Zttest returns this for the tdm04b cards: [root@mollendo ~]# /usr/src/zaptel-1.2.4/zttest 38 -v Opened pseudo zap interface, measuring accuracy... 8192 samples in 8191 sample intervals 99.987793% 8192 samples in 8192 sample intervals 100.000000% 8192 samples in 8192 sample intervals 100.000000% 8192 samples

Hiya, hope I don't bore anybody with this. There are certainly a lot of monitor-y things out there and they just didn't fit my need, so maybe this will fit someone's besides mine. http://horanappraisals.com/asterisk/pbxmonitor/ contains two files. one is a php script called pbxmonitor, and one is a flat file of extensions to extension name mappings of internal users. It

On this page http://www.voip-info.org/wiki-Asterisk+record+calls there is "Example by Mojo". I have done everything he said and I have sox package installed. [root@pbx recordings]# sox -help sox: Version 12.17.7 ... When I open this web page http://10.0.0.26/recordings/index.php I get this: No Recordings Found And there are recordings in /var/spool/asterisk/monitor Do I have to do

Skipped content of type multipart/alternative-------------- next part -------------- _______________________________________________ Asterisk-Dev mailing list Asterisk-Dev@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-dev To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-dev