similar to: Junghanns and Digium TDM400?

I will be on vacation from <22/06/06> to <30/06/06>. I will not be reachable on my mobile. I will have limited access to mails, and please expect a delayed response. In my absence, please contact the following: Ray Richard or Safeer Mohammed Thanks H.Gireesh

Hi We are currently using Asterisk 1.2.4 with IAX and app_meetme for conferencing, but are looking to move to SIP because of issues with an IAX control we're using. The reason we moved from SIP to IAX in the first place was because of the poor NAT traversal with SIP. At that stage we were using Asterisk 1.0.*. How does Asterisk 1.2.4 handle NAT traversal and firewalls compared to the older

I am having major problems with the first run of Snom 360s that rolled out last month. I am working with the US vendor and they in turn are working with Snom but I wanted to see of anyone else was using these or having issues with them. Issues: Speakerphone/Hands Free volume spikes up and down during a call. You have to manually set the volume during every call. This makes it totally unusable.

On Saturday, April 15, 2006 3:17 PM Remco Barende wrote: > I heard that Junghanns is working on such an interconnection. It is > already possible to connect their PRI cards, and they are working on > BRI<->PRI. Correct. The next driver generation is supposed to support this fully. > I ise their bristuff for an HFC-S BRI card and am not happy at all > with the way they

Hi, is the following possible? I would like to transfer a call to my "personal" MeetMe conference room and get transferred there automatically as well. Currently I can transfer the call to the conference, have to hangup and then call the conference number myself. I would love to have this in one quick function. Moreover is there a way to disable the "You are currently the only

Hi friends ! I want to add stun functionality in asterisk. can anybody give me some hint that how can i start that. thanks in advance Deepak Dhiman

Greetings, Quick question: I am about to acquire some disks for use with ZFS (currently using zfs-fuse v0.7.0). I''m aware of some 4k alignment issues with Western Digital advanced format disks. As far as I can tell, the Hitachi Deskstar 7K3000 (HDS723030ALA640) uses 512B sectors and so I presume does not suffer from such issues (because it doesn''t lie about the physical layout

Hi, I would like to see if during a call a new voicemail was recorded. I want to send a SMS to mobile phones if someone recorded a message on our voicemail system. I can use VMCOUNT to see if there are new messages in the Inbox but this will result in new SMS being sent even if the caller hangs up during the Voicemailpromt, at least if there are still unread/unheard messages in the inbox. Is

I cannot join a Win2k machine to the Samba LDAP PDC. Have added a root account in ldap added the machine in /etc/passwd and added the machine via smbpasswd but to no avail. I have turned up logging to level 3 and can't find anything. Below are the following errors.: On Win2k PC : Logon Failure: unknown user or bad password Samba LDAP PDC: Jul 2 14:54:24 devel smbd[19074]: No user to

Hey, anyone know if it's possible to receive faxes through a Junghanns bristuff quadbri card? In germany, currently I have faxes coming in on DID line into QuadBRI and then passing to Digium TDM400 (analog) and into faxmachine. But the reliability of TDM card is spotty, so I want to maybe just accept faxes in on ISDN card and save on asterisk system ...? keeping digital signal strong ...

Hi, my oi151 based home NAS is approaching a frightening "drive space" level. Right now the data volume is a 4*1TB Raid-Z1, 3 1/2" local disks individually connected to an 8 port LSI 6Gbit controller. So I can either exchange the disks one by one with autoexpand, use 2-4 TB disks and be happy. This was my original approach. However I am totally unclear about the 512b vs 4Kb issue.

Hi all, I'm trying to get a junghanns QuadBRI to coexist in the same machine as a Digium TDM400P card (so I can run the ISDN lines in and bridge with analog phones plugged into the TDM). I'm having a problem loading the modules. If I follow the BRIstuff (0.3.0-pre-1l) install method.... it's to modprobe zaptel, then insmod qozap.o I'm on Debian 2.4.31. That works. But then I

Hi all, I've got a Junghanns QuadBRI card which I'm going to install on a system in Germany Anyone give me some tips on the Jumper settings? I'm guessing it's going to be NT mode with p2p? I haven't used ISDN before. I'm going to also put a Digium TDM400P card in there to plug the analog phones into. I'm just worried about the jumpers and modes. Suggestions

Hi everyone! I have two strange problems I cannot solve with my PDC SAMBA: 1) >From every XP Pro PC I can access but sometimes I have to try 5 or 6 times to enter my domain. Then, once entered, everything works good, until next login, when I have the same problem. This is what I can see in SAMBA log file: [2006/09/12 09:17:42, 1] smbd/service.c:close_cnum(835) mario (192.168.1.101) closed

Anybody knows if it's possible to disable zap echo cancellor from dialplan only for certain outbound calls ?? I share the same phone lines for voice calls and faxes. Iaxmodem works fine for me only turning off the echo cancellor, but I need it for voice calls. Any ideas ? maxx

Hi, Trying to implement a master user (1) for auditing purposes without luck. Ubuntu 18.04.3, canonical official repos only, no ppa nor self-compiled anything. From the log below I understand the master password succeeds but AD auth fails. I am pretty sure I missed something here. Also, notice the messages "Ignoring unknown passdb extra field: original_user". Log: Nov? 1 14:02:32

Hi, this is the scenario: One * is placed in a central location with more than enough up/down bandwidth. One * is placed behind a DSL 3000/384. Both * are linked via IAX trunking. Everything is fine until the upload channel of the remote site is filled with a download, then heavy voice distortion starts. Well of course this is expected. So I fooled around with HFSC QoS scheduling on the remote

The USB core was completely rewritten in 2.6, and as such the functions that ztdummy depends on do not exist in 2.6. I get the feeling that these changes are too much to easily fix ztdummy, so I don't expect to see it working on 2.6 any time soon (if ever) I made some small changes to zaprtc to work on 2.6 and I have MoH and Meetme functions working fine in my lab. For production I would

I know it is a strange arrangement but due to contracts, it is what it is, no PRI for now. I wonder if anyone on the list has run a server with both types of cards installed? Results? I have never touched a BRI except in concept and Cisco lab. Not sure what the BRI stuffed package may or may not do to anything else that might relate to zaptel or Sangoma. Thanks, Steve Totaro

Hi! Asterisk in Debian/Lenny claims to be bristuffed, not? At least the the Debian patch tracking system shows the bristuff-patches: [1] http://bit.ly/bRRHe7 We have a QuadBRI-Card and recently needed support from Junghanns.net but they refused telling us there is no bristuff installed because of the show version output: *CLI> show version Asterisk 1.4.21.2~dfsg-3+lenny1 built by pbuilder @