similar to: [OT?]SCCP image for cisco 7905g

Has anyone successfully gotten an SCCP cisco phone to register to two different asterisk servers at the same time for redundancy? I can't seem to get the phone to recognize the second server in the callmanagergroup... Aaron -- Aaron Daniel Computer Systems Technician Sam Houston State University amdtech@shsu.edu (936) 294-4198

To get the SIP firmware for these phones, you need to buy a Cisco SmartNet support contract (about $75 USD in the USA, though I've heard rumors a Europe-only contract exists for about $10 USD.) You can purchase one through most Cisco resellers. That will give you access to Cisco's download site. Configuration of these phones under SIP is not quite as straight forward as it is with SCCP,

I have some Cisco 7960's and want to use them with SCCP - I have gotten it working with a few different firmware versions but all seem a little flakey. I know that SCCP is not as solid as SIP but am wondering, which firmware version is advised for use with chan_sccp from http://chan-sccp.sourceforge.net/ -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi to all, I've just received my Cisco 7905G ipphone. I want to connect it to asterisk server but it looks that it has been preloaded with sccp protocol, so I guess I need H.323 or SIP firmware image of some kind. I have a working tftp server on my asterisk box also....What do I need to do now to get things wokring? Thanx in advance, Victor...

I'm trying to setup a couple of Cisco 7960's in asterisk. I have asterisk working fine for sip clients, and can call the 7960's just fine, but I can't seem to dial out on them. As soon as I enter the first digit, the phone attempts to dial it without waiting for the rest. I've changed timeout settings, etc but can't seem to get it to work. Any ideas? Asterisk

I am trying to register cisco 7920 to asterisk using sccp since to sip firmware upgrade to it ,but its ends with failed registration.Can you please send me a sample for sccp.conf configuring cisco 7902. Thanks -- SCCP: Accepted connection from 192.168.5.163 -- SCCP: Using ip 192.168.5.228 -- SCCP: Accepted connection from 192.168.5.163 -- SCCP: Using ip 192.168.5.228

I don't think that will fix my problem. The hints on the individual user extensions (101, 102, 103 and 104 below) are working just fine. sccp.conf example of 1 user: [devices] type = 7970 description = User1 tzoffset = -6 autologin = 101,401 speeddial = 102,User2,102@wct-internal speeddial = 103,User3,103@wct-internal speeddial = 104,User4,104@wct-internal device => SEP000F90CEF9D3

I have a new asterisk installation (1.4.2) that is working fine with SIP. Now I'm trying to add 2 cisco ip phones (7960) running SCCP (latest chan_sccp). I have the phones booted, and the tftp directory all setup, etc. But the phones do not quite work right. When I lift the handset I only get a dial-tone 1 out of 5 or so times I try, though hitting the speaker button works. I can dial

Hi All, I'm thinking of creating a new asterisk server using the latest 1.4 stable release to replace my ageing Asterisk SVN-branch-1.2-r7231 (its been a while!). My only concern - my phones are Cisco 7960's (with sccp firmware 7.2 loaded) and to support them better, I remember compiling in a skinny(?) driver to replace the (from what I could tell) basic in built sccp support. After

Hi! I have two, not too related questions: - the probably simpler one: if anyone can help me out using a Cisco 7905G with chan_sccp? I did already managed to get it working with a SIP image, I'd just like to see it work with this one as well. It's probably something I screw up with the configuration, as the phone registers, only I don't get any lines with it, although I have it

Hi folks, some of you might know Sergio Chersovani's rewrite of chan-sccp, the asterisk channel driver for Cisco Skinny phones. I have put up an unofficial site with some sample configs, a little help and a webbased forum. Both are just new, so don't expect too much :-). Everybody is invited to participate especially at the forum. Any comments, proposals, critics are very welcome. Find

Interesting notes on the 79xx series. The 7920 is the wireless phone; not mentioned here. For a more complete guide to Cisco's phones, see: http://www.cisco.com/en/US/products/hw/phones/ps379/products_data_sheets_list.html The 7902 is the "very inexpensive" Cisco phone, and it looks like it will be SCCP (Skinny) only. Twiddling my thumbs here waiting for the chan_sccp to

Dear I installed chan-sccp-b v3 on a powerful virtual machine, with 4 cpu cores and 16GB RAM(enabled in kernel by PAE) about 1,200+ clients are going to register in this machine. all data of clients are saved in ORACLE. The asterisk (1.6.2.18) connected to the database throw odbc(unixodbc). all logging are disabled( verbose, debug and sccp debug) . the asterisk was crashed every few minutes. here

Hi, An Cisco 7960 ipphone has been set to SCCP firmware by one of our students. I want to set it to 7.5 SIP firmware and I've been unsuccessful yet. Firmware versions are SCCP 3.0 (Source: http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/ipp7960/addprot/mgcp/frmwrup.htm#wp1045789) ie: Application Load P003F300 Boot Load ID PC030300 When I browse, phone settings, I see

Hi all, I have a Cisco 7905g with the default cm firmware. It is connected to * using chan_sccp.so. Normal operations with this phone work perfect. Now I'm implementing a click to call app in php. This php app connects to the manager interface and sends the following down the line: $this->_write($fp, "Action: Originate"); $this->_write($fp, "Channel:

Does anyone have the 7970 work with sccp? I have used the example configurations from the wiki. I can see that the phone is failing to retrieve the CTLSEP<MAC>.tlv file and then is able to retrieve the SEP<MAC>.cnf.xml file. The phone is hanging with the message "updating ctl". Thanks, John SEP<MAC>.cnf.xml: <device> <devicePool>

I have the option of running either SIP or SCCP for my cisco VoIP rollout..can someone shed light on what the pros/cons are? Seems everything is SIP these days so that's the option im leaning. Thanks- Matt

What is involved in getting SIP firmware into a Cisco 7960 with sccp installed? Expensive image from Cisco? Plated in unobtanium? joe a.

Dear all I have configure Asterisk 1.4 with sccp and configure Cisco phone 7975G model with Asterisk and it is working fine but i have one problem when i going to confance like when i call to someone and put it on hold and want to take in another New call to new person and want to take both live call in confrance how to do it in asterisk is there any configuration XML

Hi people, I have a Cisco ATA 186 which understands only the SCCP protocoll, therefore I am a pure beginner and I hope that anybody of you could help me. How will I configure the ATA which has 2 analog ports? For any support I would kindly thank you Tamer