similar to: GXP-2000 Volume Issue

I have upgraded the GXP-2000 to the newest firmware 1.0.1.12<http://1.0.1.12>and the phone is much more usable However, I still have two slight sound quality issues: 1) There is static on the line at all times. It is not that noticable to me, but when I make calls out the PSTN the person on the other end hears it. If I use a Cisco ATA with an analog phone and call the same person again

I'm using a few GXP-2000 with firmware 1.0.2.13 and everything seems to be working fine. However, there are a couple of issues I'd like to know if are possible: 1) Even though the phone has 4 line appearances, if I am speaking on a line, the phone can no longer receive phone calls. I can manually select another line and make calls, but when Asterisk tries to send a call to it, I

I have a client with 20 GXP-2000s. Everything seems to be working fine. However, after a couple of weeks of use, the client is having a hard time adjusting to the new IP based phone systems and only misses one feature from their old Lucent system. That is, they had 8 analog lines before and all their old Lucent phones showed a button for each line. So, it was easy for anyone to say,

I have about 30 GXP-2000 phones running 1.0.1.9 which have all been configured using the provisioning feature so the configuration is all identical. The problem I am having is that they randomly seem to stop registering with asterisk. When they stop registering they can still make calls but oviously asterisk cannot ring the phone so all incoming calls go to voicemail. Has anyone else had similar

FYI, spoke with Grandstream this morning, the GXP-2000 release has been delayed again. Looking like April now before these hit the street. -- Cory Andrews Senior Partner VOIPSupply.com +++++++++++++ V: 800.398.VOIP X22 F: 716.630.1548 E: Cory@VOIPSupply.com

Hi, I have a lot of GXP-2000 phones not registering with Asterisk server. After two days of attempts, it seems that problem is due to the fact that phones and server are not on the sme network. Do you know if this is known issue? -- Domenico Viggiani

Anyone know if it is possible to control how aggressively the "Aggressive" mode behaves. Meaning, is it possible to dial back the aggressive mode to have a happy medium between Regular and the Aggressive defaults. I have a situation where Normal echo cancellation is not quite enough, however when I turn on aggressive mode We are attacking it to hard and I am unhappy with the walkie

Hi all Slightly OT but I know a lot of GS experts hang out here - I just upgraded a GXP-2000 to firmware 1.0.1.13 to try out the BLF functionality with Asterisk (which so far works as expected), but as a side-effect the phone won't sync with an NTP server - I've tried different server names (time.nist.gov and pool.ntp.org) and IPs in the config, but it refuses to update the time on

Greetings all I was wondering if any of you have found this problem. I have a setup with 80 GXP-2000s which work great until I decide to stop now my asterisk server. When it comes back up half of the phones (not always the same ones) fail to register with Asterisk. I set up the phones to register and send keep alives (register every 4 minutes, send keep alives every 20 seconds) to no avail.

Hello! I am considering mass deployment of Budgetones 102. According to their website, remote provisioning (configuration via TFTP) is possible. Anyone has experience with this? Is this really working?

Is it possible to program the multi-purpose keys on a GXP-2000 remotely via a TFTP configuration file? If so, what are the parameters to put in the configuration file? Thanks, Daniel

Hey Everyone, We are in the process of reviewing headsets for use with our GXP-2000s. I'm looking for some feedback as to which headsets people are using, the pros and cons of those headsets, and if they would recommend them to someone else. Any help would be appreciated... - Jason -------------- next part -------------- An HTML attachment was scrubbed... URL:

Anyone used the new Grandstream GXP-21XX series phones. We have been testing these phones and like what we see. We are looking for a greater cross section of testing before we roll them to production. Any feed back would be appreciated. We are talking with Grandstream engineering and they are looking for feed back as well. Any input is appreciated. Thanks Bryant -------------- next part

Guys. I just downloaded the recent firmware for GS GXP 2000 and I must say the phone works great but... How do you make the conf button work?????? Anybody done that? Also, with great dissapointment I must ask, where is ILBC support? GS web page mentions it and the manual says it supports it almost using bolds :) soooooo where is it???? Any light on this?

I've done some googling and searched voip-info but I'm not able to find a good answer about how to provision the GXP 2000. Based on questions I've asked before it seems like a lot of people are using the grandstream phones so I figure provisioning can't be that hard. Is everyone using the web interface for *every* phone? Or is there a better, more automatic, way? TIA!!! Thanks,

Hello I'm about to order a GrandStream GXP-2000 and a Linksys SPA-921 I'd like to have some user feedback about how those phones perform, and whether their LCD screen displays both the caller ID name and number (The GrandStream BT-100 only displays numbers, which isn't very helpful). Thank you.

Hi, I'd set the daylight saving option to yes on all the GXP-2000 phones, but apparantly it doesn't move it an hour back on last sunday of October. So now I am stuck will all the phones showing the wrong time. Isn't there an option so that it'll automatically update daylight savings? Thanks -- Zeeshan A Zakaria -------------- next part -------------- An HTML attachment was

Hi folks, Just a quick question. Does the GrandStream GXP-2000 phone support presence (hints)? Cheers, Richard. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060109/26c4a63c/attachment.htm

I have had 2 GXP-2000 for a while now and been slowly following the firmware releases made by Grandstream and am now up to 1.1.0.13. This version works really well on these 2 original phones (MAC's 00:0B:82:06:xx:xx), so I went ahead and ordered another 2 phones (MAC's 00:0B:82:09:xx:xx). One of these I upgraded to 1.1.0.13 (it came with 1.1.0.5) and pressed it into use. The Speaker

Dear, I'm having problems with the configuration of this gateway(GrandStream GXW 4108), I used the instructions from GrandStream but it doesn't work. Someone has a good configuration for this gateway? Thanks in advance, Nelson -------------- next part -------------- An HTML attachment was scrubbed... URL: