similar to: Cannot boot machine up after working on zaptel....

What happens if you take out the Zaptel I/F's? If it boots, you can correct whatever you did then replace them. hth -----Original Message----- From: Chris Earle (CBL) [mailto:cearle@cbltech.ca] Sent: Tuesday, February 28, 2006 7:45 AM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Cannot boot machine up after working on zaptel.... Hi all, hard for me to explain this, but

Hello all, With some help from people in #asterisk on freenode, I've managed to get incoming SIP calls working. Outgoing calls however are however a different matter. My whole working (incoming calls only) SIPgate configuration can be found here. [1] When I uncommon what's in there, nothing works. There doesn't appear to be any useful error being logged , even when debug is

Is anybody using 1.2 (or 1.2.1) in a production network using Realtime (voicemail, sip or extensions) with 100+ SIP phones? If so, what are your experiences? We've been running 1.0.3 for about a year and it's been rock-solid. We'd like to upgrade to Realtime and 1.2, but I'm afraid of killing our stability. Obviously, we'd do it in stages (upgrade to 1.2, then realtime

I'm a complete Asterisk novice and have an installation based on the Asterisk@HomeCD. I've installed my TDM400P with 2 x FXO & 2 x FXS, but every time I try to dial out, I get a message "No circuits available". Can someone confirm the pinouts for connecting the FXO's to a UK BT Line - I have RJ11 connectors on the back of my TDM400P card, so ideally I'd like to

Hey all, having a terrible time with asterisk-stat -- it runs, server is fine, but some of the pages don't display properly/at all --- I think this is a code problem with them, but not sure. I thought everyone loved the asterisk-stat package? See below problems. Any ideas? Areski hasn't replied to me since.... -- Chris ----- Original Message ----- From: "Chris Earle

Hi all, Has anyone ever thought about or implemented a way to use Rails to pull content from a database and actually *generate* static html pages from view templates? I want to throw a bunch of content into a db using rails and then put all my website templates into the views dir and write the files out with the content inside. The funny thing is that the html pages Rails normally outputs to

Is it possible to run the CVS-HEAD/Stable version of Zaptel (1.2 whatever) with an older version of Asterisk? I'm running 1.09, but I was wondering if I could get at the newer echo cancellers like KB1 and MG2 without upgrading to Asterisk 1.2? I'm going out on a limb here to try and fix a serious echo problem on a TDM + BT PSTN line in the UK Thanks for your suggestions everyone --

Hi all, general query here --- I'm about to set up an asterisk box for use in Japan but can't figureout if it's all ISDN there or what? I have gathered so far that the two major providers, NTT and KVH both offer ISDN lines with .......INS1500 and maybe INS64 protocols? Not sure... But I'm seeing stuff about J1 vs. T1/E1 .... so does that mean I can't use a Digium card it

Arrrrgh I hate trying to sift through all these messages and keep track of the various threads going on ......... Who else on here prefers the newsgroup/threaded approach? If you haven't already, check out news.gmane.org for mailing lists turned into newsgroups readable by news readers....... only problem being that this list requires list membership before

Hi all, I've been working with * for a long time now, but only with analog FXS/FXO systems. I am venturing towards setting up a box in Germany now and I believe that requires a Fritz card? Do I even have to use the Fritz cards? Why not a Digium card.... We have 2 ISDN lines ( --> 6 handsets) so I'm guessing that will require 2 Fritz PCI cards (they have 1 port only). Then

Hi all, is it possible to bridge a call between a Junghanns quadBRI card and a TDM400 in the same server? It should be I think, -- I am trying this and when an incoming call comes in, it hangs both up at the moment the bridge is attempted (and a subsequent 'qozap: dropped audio' error is show in the /var/log/messages) Any thoughts appreciated -- I've seen posts, but no clear

Hi all, getting a server going wiht a few TDM400's and some phones, and some IAXys too I haven't heard any issues about AU phones being able to RING in Australia, like the problem in the UK with ring capacitors on the BT system. Are there any problems like that? Also, with the iaxy's -- they should work (and ring) in Australia right? The only hint I'm seeing around is the use

This extension http://meta.wikimedia.org/wiki/Auto_Login_via_REMOTE_USER requires web server authentication right? Correct me if I'm wrong, but this means that the contents of the User Table would have to be in the passwd file defined through the .htaccess file right? .. because it passes whatever the user authenticates on the webserver with through to the wiki/extensions scripts right?

Hi all I'm using sangoma a200 cards in the UK and have the ongoing, often noted problem of disconnect supervision with BT POTS lines. Just noticed this post on http://www.voip-info.org/wiki/view/UK+Asterisk+Details stating that potentially someone's got a solution : "TDM400P & Not Detecting Hangups: Got a TDM400P installed and having problems with Asterisk not detecting

Hi all, haven't seen many posts about asterisk in Singapore... Getting a server going there and was wondering if TDM400Ps will be fine in FCC mode, and if there are indications / cadence values that I should be putting on there as in other international locations. Seen an unsettling post on voip-info about Singapore issues with Call Polarity/Hangup Detection -- crossing my fingers I

Hi all, I've got a Junghanns QuadBRI card which I'm going to install on a system in Germany Anyone give me some tips on the Jumper settings? I'm guessing it's going to be NT mode with p2p? I haven't used ISDN before. I'm going to also put a Digium TDM400P card in there to plug the analog phones into. I'm just worried about the jumpers and modes. Suggestions

Hi all, I'm trying to get a junghanns QuadBRI to coexist in the same machine as a Digium TDM400P card (so I can run the ISDN lines in and bridge with analog phones plugged into the TDM). I'm having a problem loading the modules. If I follow the BRIstuff (0.3.0-pre-1l) install method.... it's to modprobe zaptel, then insmod qozap.o I'm on Debian 2.4.31. That works. But then I

We have a location that is having a really odd issue. We have a sangoma POTs card. We are running software echo cancellation with the card (through asterisk) to try to eliminate some major echoing problems. I've turned on both EC and echotrain, which seemed to have gotten rid of the echo for the most part. However, we are now running into an issue where the outside caller hears a star wars

> > > Hi, > > > I checked by changing to from-zaptel, but no luck yet. Pls guide me on > this. > > Regards, > vudura senadeera > > > ------------------------------ > > > > Message: 9 > > Date: Fri, 19 Jan 2007 16:47:18 -0000 > > From: "Robert Jenkins" < raj@jrw.co.uk> > > Subject: RE: [asterisk-users]

Hi folks, I've already searched the mailing list but no one else seems to have my same problem. I'm using Asterisk with the following configuration: Fedora Core 4 (but I also tried Fedora 3) 1 Digium TE110P 1 TDM40B 1 HFC-S 'Cologne' bristuff 0.2.0-RC8o (zaptel 1.0.9.2) I compiled right, I can load kernel modules but when I try to unload wcte11xp module (the one