similar to: Asterisk with HT 488 FXO

hi all, how can I set the interval in second from retrasmit the magic packets when qualify is set to on? I want to view whitch voip-phone is connected but I don't want to DOS my adsl connection.... ;) Thanks Enrico P. -- Pasqualotto 'Pasqu' Enrico enrico AT pasqualotto DOT org web: http://www.pasqualotto.org skype: epasqualotto

Hi, I have HT488 with it's FXO connected to Israeli PSTN (bezeq) when dialing to that PSTN line asterisk see gets the call and direct it to the right extension but if the extension doesn't answer and the dialer is hanging the call the extension will keep on ringing. I'm not an expert but it seems like my asterisk doesn't recognize the hangup signal from the HT488 -or it's the

Hi all, in witch way can I put in a log file the asterisk console? I have tried with some settings in file logger.conf but the log not contain the same debug that I can see with "asterisk -rvvv". I need it in debugging purpose for tracking some bug. Thanks Enrico. -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type:

hi all, I have a little question about meetme in Asterisk. One of my client ask me that all call can, if is necessary, become conference for 3-4 user during conversation. I think that are 2 way for make this: 1- all call (instead if the users are only 2) are conference 2- using n-way call (http://www.voip-info.org/wiki/view/Asterisk+n-way+call+HOWTO) I decide to implement the first way because

Hello, i've recently switched over from 1.0.9 to 1.2.3. I've experienced some (to me) weird behaviour. This is the config for an example queue.conf: [654] wrapuptime=30 timeout=20 strategy=ringall retry=5 queue-youarenext=queue-youarenext queue-thereare=queue-thereare queue-thankyou=queue-thankyou queue-callswaiting=queue-callswaiting music=default monitor-join=yes monitor-format=

When I make a call out on the Faktortel number I am then able to transfer to call to my asterisk meetme room of 801 by hitting 'transfer' then '801' then 'send' on my grandstream phone. This connects my faktortel trunk (and who ever is on the other end) to my conference room I can then make another call using my local pstn service and set up a 3 way (or whatever number

Hi, guys, For my server, if i use my handphone to call in the PSTN line by TDM400p card, the server could not receive the caller id correctly. anyone knows the problem? I am currently using asterisk 1.2.14 with freepbx 2.2.1. The CLI is as below, "Caller ID name is 'zap1' number is '4521'" , this 4521 is one of my FXS zap extension created. dialparties.agi: Starting New

Skipped content of type multipart/alternative-------------- next part -------------- asterisk1*CLI> soft hangup Zap/1-1 Requested Hangup on channel 'Zap/1-1' == Spawn extension (macro-exten-vm, s-BUSY, 2) exited non-zero on 'Zap/1-1' in macro 'exten-vm' == Spawn extension (ext-local, 220, 1) exited non-zero on 'Zap/1-1' -- Hungup 'Zap/1-1' --

Hi Everyone, I have an asterisk box in my office. It does not display the correct Incomming Caller id. For incomming we are using ISDN Bri line which is terminated in a Digium 4 port bri card (B410P). Like if a number say 02 12345678 calls to our line asterisk displays it 12 12345678. Similarlay if a mobile number say 0416 123456 dials us , asterisk displays 1416 123456. I am not sure where the

Anyone tried to muck around with using the 488 for both fxs and fxo with asterisk? I've been playing with one for the last couple of days, and it looks like its a little lower quality then the spa3k. No gain settings, echo canceller is less then ideal on long analog pstn loops, etc. Anyone with good experiences?

I have Asterisk 1.2.29, Zaptel 1.2.24 and Freepbx Setup for a queue up to 15 agents through a PRI line, it was working fine for more than 1 year, suddenly, when there is a load on the queue, the asterisk service disconnects and the calls are dropped. And the service starts again after few seconds, and so on. I am not using fax. I checked PRI by zttool and there are no alarms. The cdr logs

Hi, I set up a ring group. I would like for people who select a certain voice menu option to ring a list of extensions (I have just one extension in there at the moment) and if it doesn't answer to go to an extension's voice mail. I am using a version of asterisk from CVS, last updated a couple of weeks ago. This line in extensions_addtional.conf sends the call to ringgroup 3 if

chan_sip.c6524 reload_config= unable to get ip address from asterisk, sip disabled The ip address is working fine, Internet works great. Can anyone help...Thanks

Hello, Just want to tap the collective wisdom of this list as to experiences pertaining to the Handytone HT488 and the Sipura SPA-3000 adapters... Basically I'm looking for a FXO/FXS/LAN ATA and these two seems to be the top of the pick..Any comments and experiences esp. with Asterisk compatibility would be great, before I plonk in the bucks. TIA. /wai-sun

I am using asterisk version 1.2.6 with Zaptel version 1.2.5. I have a POTs line coming into a Digium TDM01B. It appears to not be getting CID at all. If I hook up a POTS phone to the line CID comes through fine. Inbound and outbound calls work fine but there is just no CID on inbound for this channel.The incoming route for the channel is Zaptel Channel 0. No DID or CID settings applied. My IP

Hi people, I have the following dialplan, but it doesn't have the behavior that I think it should have. [default] exten => 2001,1,Answer exten => 2001,n,Dial(local/3005) exten => 2001,n,Hangup exten => 3005,1,Set(__RINGTIMER=10) exten => 3005,n,Macro(exten-vm,novm,3005) exten => 3005,n,Hangup When I execute the Originate (AMI) with the argument Channel=local/2001, It rings

Hi, spandsp-0.0.2pre18 works fine for txfax with HT488(version-1.0.1.2), but rxfax doesn't work. After some FAX sounds, it hangup! Could someone tell me how to debug? The following is the * CLI> log to 192.168.0.161:43222 -- Executing NoOp("SIP/4881-bde9", "") in new stack -- Executing RxFAX("SIP/4881-bde9",

Hi I've been looking for 10 minutes and cant find dialparties.agi Can anyone tell me what folder this is located in as I'm going crazy. (if it makes a difference I use asterisk@home and am replacing the AMP dialparties.agi file) Super big TIA, Dean -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, I'm trying to setup a Quiz/feedback for caller of call center when a agent hangup. I use Asterisk 1.8.16 and I'm trying with Queue and Dial with options c and g but every time I try to play something I got: -- Executing [301 at from-test:1] Dial("SIP/300-00000045", "SIP/301,60,rjtTg") in new stack -- Called SIP/301 -- SIP/301-00000046 is ringing

Hi to all I've mada up my mind and i tried to change from i4l to chan_capi, following some councelling from the gurus. I compiled it up, and when i try to load it in modules.conf, i get that wonderful message and Asterisk does not start: [chan_capi.so]Feb 17 09:21:40 WARNING[16384]: loader.c:239 ast_load_resource: /usr/lib/asterisk/modules/chan_capi.so: undefined symbol: ast_get_group Feb