similar to: chan iax2 auto congest

I've already sunk several hours into this without any real progress, so I'd really appreciate any help My task is simple -- establish a connection between a softphone on XP ProSP2 to a Asterisk server on Linux FC4 over a LAN through a Netgear router. The server will then go out to a PSTN termination service. Thus far, the PSTN termination connection works fine -- I've opened up 4569

Hy all! Your Asterisk server is return this log : *CLI> -- Executing Dial("Khomp/B0C0", "IAX2/*.*.*.*/9834|30|r") in new stack -- Called *.*.*.*/9834 Mar 14 15:35:40 NOTICE[4212]: chan_iax2.c:2836 auto_congest: Auto-congesting call due to slow response -- IAX2/*.*.*.*:4569-1 is circuit-busy -- Hungup 'IAX2/*.*.*.*:4569-1' == Everyone is

Hello all, Here is my problem, I try to place a call to FWD (free world dialup) trough my asterisk PBX. my config is as follow: extensions.conf ---------------- [internal] exten => 613,1,Dial(IAX2/iaxfwd-outbound/613) (service echo de FWD) exten => xxxxxx,1,Dial(IAX2/iaxfwd-outbound/xxxxxx) mon numero FWD exten => yyyyyy,1,Dial(IAX2/iaxfwd-outbound/yyyyyy) celui d'un ami FWD

I am using Asterisk CVS from last week and have been using Realtime SIP for a couple weeks now without any problems. Yesterday I decided to turn on Realtime IAX but I am having problems dialing to my long distance providers like Voicepulse, Sixtel or Nufone. I get the following: -- Executing Dial("SIP/2001-3761", "IAX2/password@voicepulse/19566680301") in new stack

Hi All, I am using Asterisk 1.4.26.2 and I am getting the following problem making connections to this server. My other servers are Version 1.2.x which have no problems and this 1.4.26.2 server can call the other 1.2.x servers. The error is: chan_iax2.c:4251 handle_call_token: Call rejected, CallToken Support required. If unexpected, resolve by placing address 192.168.25.250 in the

Hello, I Have an agent on a queue, evry thing works normally, but after a time (about 5 minutes) my agent is pauses (agent is still regitred but can't takes calls), on Astrisk console i have the message : [Jun 20 11:55:12] NOTICE[8803]: chan_sip.c:2757 auto_congest: Auto-congesting SIP/anna-08215f68 -- SIP/anna-08215f68 is circuit-busy -- Nobody picked up in 8000 ms I think

Hi List, I have set up the following in my extensions.conf ; local numbers look like 0262XXXXXX ; but must be dialed 262 262XXXXXX exten => _0262XXXXXX,1,Dial,IAX2/543@voipjet/011262262${EXTEN:4} exten => _0262XXXXXX,2,Dial,IAX2/jhiver@NuFone/011262262${EXTEN:4} exten => _0262XXXXXX,3,Congestion It did work for a while, however when dialing I get: stargate*CLI> -- Executing

We just released a new version of the idefisk iax2 softphone, version 1.21 beta, available for download at http://www.asteriskguru.com/tools/idefisk_beta.php Some bugs were fixed, some new bugs might have been introduced :) - The problem with delays is finally gone!!! (one of the bugs was a memory leak, everybody using an older version is encouraged to upgrade.) Privacy Warning: Version 1.21 of

Hello I just settup a realtime mysql table for sip_peers. All peers (friends) is autenticateing but when i want to initiate a call between them i got the following error. Someone have some ideea? Thank you. ---<Cut Here>--- pbx*CLI>console dial 1014 == Console is full duplex -- Executing [1014@default:1] Dial("OSS/dsp", "SIP/1014|40|t") in new stack

Hi all, I have here several IAX2 Softphones(IDEFISK, DIAX and an own develop based on iaxclient.lib). I have follow dialrules in my std-test extension: [std-test] exten => *601,1,Answer exten => *601,n,Dial(IAX2/pbxnetwork/xxxxxx,30,m) exten => *601,n,Hangup exten => *602,1,Answer exten => *602,n,Dial(IAX2/pbxnetwork/xxxxxx,30) exten => *602,n,Hangup No I have a problem when

Is iaxtel down? Ive been getting this: May 21 19:23:42 NOTICE[29984]: chan_iax2.c:2782 auto_congest: Auto-congesting call due to slow response -- IAX2/Iaxtel-12 is circuit-busy -- Hungup 'IAX2/Iaxtel-12' is it down or am I doing something wrong?

I just had a situation where I could not get calls from or out to one of my IAX2 boxes to another. The one which seemed to have a problem didn't show the server in its "iax2 show registry" list. I reloaded and the register showed up. Looking at the server, when I called the number I got the message: Jun 2 20:48:34 NOTICE[25542]: chan_iax2.c:2209 auto_congest: Auto-congesting

Hi - I'm running CVS-HEAD from 2005-08-11 20:17:17 UTC, and I'm trying to set up some redundancy on IAX connections between locations. I have two IAX peers set up that work correctly by themselves: "ast551-out" and "ast551-out-backup": [ast551-out] type=peer secret=secret username=ast551 host=X.X.X.X qualify=1000 disallow=all allow=gsm allow=ulaw trunk=no

Ok so I've just built and installed a CVS (HEAD) version of asterisk on RHFC2 running a 2.6.13.3 kernel.org kernel. I installed the samples via "make samples". Everything seems to work except one thing. I'm trying to do the connect to the Digium IAX demo server portion of the demo (dial 500) and I just get the following messages. I am behind a NAT server and did NOT change

Hi, I have an FWD account and it's configured in asterisk. I can be called by people using FWD, but I cannot make FWD calls myself. Every number dialed with a 8 prefix goes to FWD, if for example I call the echo servie I get this: Connected to Asterisk 1.2.13 currently running on asterisk (pid = 2865) Verbosity is at least 35 -- Executing SetCallerID("SIP/timothy-08224f08",

Hello, I've got various phones (mostly SPA-922) behind NAT registered to Asterisk. I've set nat=yes and canreinvite=no, and everything seemed to work great with 1.2.17. After upgrading to 1.4.2 using users.conf and macro-stdexten my spa-922 can't call other extensions. -- Executing [23@default:1] Macro("SIP/22-b72006f0", "stdexten|23| SIP/23") in new stack

Hi All, I am stuck with an issue in the Openser+Asterisk Forking. In this solution we are using Openser as the Registrar. Hence it will store all the contact bindings along with the q values for a given user, say ua1. The current setup is such that the INVITEs are sent to Asterisk by Openser and Asterisk sends out the INVITE. Now if ua1 is registered with two different contacts having

Hi, after some corrections in my settings IAX2 dialin seems to work now. I get the incoming call, but i cannot here anything or can speak. (If I take the call the other side see that the connection is established if I close the call the other site is seeing it too) If I press hold in Idefisk the other side can hear MoH but not me. Asterisk print in the CLI interface that he starts MoH. The

Hi list, I have 2 softphones, 1 Idefisk (IAX), 1 Xlite (SIP) registered to Asterisk. One call the other-one, is it possible to order Asterisk to force answering the call ? i.e. Xlite call Idefisk, Idefisk is ringing, I send a command to Asterisk which force answer, so Idefisk answer the call without clicking on "Accept" button. Greg -------------- next part -------------- An

I've just setup a new asterisk box (cvs HEAD) with a digium tdm411 and a couple computers with eyebeam. I have one small. I cannot call the eyebeam clients from the phone connected the fxs port. I can call the phone from the eyebeem clients. And, I get both the fxs phone and eyebeam clients to ring when a call comes in through the fxo port. I have been trying to get this straightened out