similar to: disallow, allow codes

In my sip.conf, under general I have: disallow=all allow=g729 allow=alaw allow=ulaw Then I have a specific sip: [RNK] <clip> disallow=all allow=alaw allow=ulaw allow=gsm If I do this: exten => _9.,1,Dial(${EXTEN}@RNK,60) The call still goes out as G729 even though I've told the RNK to disallow g729. I need to be able to make other 729 calls but to this one paticular group, they

You got to be kidding about 53 calls being recorded at sametime is an issue. I have done at least twice as many on my dual xeon 3.4Ghz system and had no problem as clients like to record every call that goes through the system. Then again, in my system, the in and out channels are mixed first before they are written to the disk. ________________________________ From:

Hi, I am using Asterisk for a call center on a Dual Xeon machine.. I currently have 109 active channels 53 active calls Every body is complaining about quality and cpu is around 80% idle. Is there any tuning I can do??? Besides that, Asterisk normally goes down once or twice per day... Thank you Dov -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I have developped an application that monitors the status of my queues through the events triggered on the Manager Interface. This way, I can know the status of my Agent real time. Now, I have a new requirement that I must allow a manager to click on the Agent he wants to monitor and be able to monitor the call. My idea was to, when the user clicks on the Agent, I would Originate a call

Hi, I got this message on my Asterisk messages file and after it Asterisk went down... 2006-02-18 08:13:55 WARNING[3214] ast_expr2.fl: ast_yyerror(): syntax error: syntax error, unexpected TOK_PLUS, expecting TOK_MINUS or TOK_COMPL or TOK_LP or TOKEN; Input: + 1 ^ 2006-02-18 08:13:55 WARNING[3214] ast_expr2.fl: If you have questions, please refer to doc/README.variables in the asterisk source.

Hello Everyone, I have disallow=all and allow=g729 set in sip.conf however, it seems that asterisk still thinks it support other codecs: Capabilities: us - 0x80000008000e (gsm|ulaw|alaw|h263|testlaw). How can I disable gsm,ulaw,alaw..... Thanks in Advance, Nick.

Hi, For the dial application, parameter g is described as a.. g: When the called party hangs up, exit to execute more commands in the current context. I want the following priority (or at least a priority I can jump to) to be executed anyway, it doesn't matter which party hang up. Is there a way to do so? Thank you Dov -------------- next part -------------- An HTML attachment was

Hello, After 2 weeks and 4 days without a problem, Asterisk went down. What happened is that I am using Asterisk 1.2.1 on a machine and have a MySQL for CDR on another machine. The machine with MySQL went down and the Asterisk box was unable to connect to MySQL. This made Asterisk to go down and it was unable to restart until MySQL was back. I know that Asterisk displays a lot of warnings, but

Hi ALL, Is it possible to use symbols # and * in the dialplan for pattern matching? I am doing a "follow me" dial plan, and wanted that my users could dial everything in one shot. But, exten => 888*XXX*XXX,1,NoOp(Follow Me from XXX to XXX) doesn't seem to work... Thank you Dov -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I have the following requirement.. after a customer is answered by a Queue, I want him to be redirected to another extensions, where an IVR would answer and ask for his opinion about the analyst who just solved his issue. Is there a way to redirect him automatically, or do I have to ask my agents to manually transfer the users to this IVR extension? Thank you Dov -------------- next part

Just good old monitor with no mixing onto the scsi drive. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Tamas Sent: Wednesday, April 12, 2006 4:55 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] call center running Asterisk - sound quality-critical! Hi, how do

Hi, I made a simple menu using the Background application and some wav files. I converted the wav files using for a in *.wav; do sox "$a" -r 8000 -c1 "`echo $a|sed -e s/wav//`gsm"; done (from http://www.voip-info.org/wiki/index.php?page=Convert%20WAV%20audio%20files%20for%20use%20in%20Asterisk) The first two files "01/bemvindo" and "01/menu_top" are good.

Hi, I know this has already been discussed here, but I still have the problem even with 1.2.6: When I call a mailbox in a context "company" is doesn't play my busy message... It goes directly to the temp message... Am I doing something wrong? == Everyone is busy/congested at this time (1:0/1/0) -- Executing NoOp("SIP/200.234.208.250-0840f548", "Voicemail de

Hi, This seems to be a fairly common question, but I have Googled for this quite a bit and looked at the Asterisk documentation/book and haven't been able to find an answer. My question is: Can I get my IP phone to select a different codec depending on the final destination of each call? I've got these things connected to my Asterisk box: - Snom 300 phone (supports g729 and

Hi all, I need to test the following scenario: +-----------+ +-----------+ | asterisk 1| | asterisk 2| +-----------+ +-----------+ | | | | _______|__________________|___________ | | | | | | +-------+ +-------+ | ATA 1 |

the legs separately as if they were not related to the same call. So the ingress leg negotiates ulaw, and despite it knowing that the peer also supports g729 fails the call since it's already decided on ulaw and the egress leg only accepts g729. If this is design intent I'm wondering if there is demand enough to justify a feature request? Any advice on how I can work around this issue?

I'm communicating a softphone (SJPhone) to a Grandstream phone GXP-2000. The codec order on each one is the next: SJPhone: GSM - iLBC - PCMA - PCMU GXP2000: G729 - GSM - PCMA - PCMU (I have a G729 license, so there's no problem with transcoding G729) In my sip.conf, I've defined the following codec order: disallow=all allow=g729 allow=gsm allow=g726 allow=alaw allow=ulaw And my

Hi, all. I have problems with iax2, when try to communicate with one third server, asterisk reports the following errors in server's, could help me? Server A it speaks It with C in iax and Server B it speaks with D in iax, but Server A it does not obtain to speak with B in iax, reports the following error in server B "chan_iax2.c:5749 socket_read: Host 200.xxx.xxx.xxx failed you

I have a fresh 1.4.10.1 installation that appears to have a problem with g729 pass-through. I can see the gateway in question sending an INVITE using g729b. However, the Asterisk is only sending g711 in the INVITE to my Polycom phone. [gateway] disallow=all allow=g729 [phone] disallow=all allow=ulaw allow=alaw allow=g729 There's the codec configs for the gateway and the phone in question.

Hi, I am doing an AGI that logs to a database every Agent login/logoff. My idea is to be able to go to this database and check which agents where logged so that I can force their login in case Asterisk goes down for some reason. The problem is that I would need to reload their status from this AGI when Asterisk initializes. Is there a way to do this? One idea I had was to make safe_asterisk to