similar to: pickup problem on Asterisk 1.2.4

Hi everybody. Just noticed that when calling a mobile phone, Asterisk doesn't bridge the voice message by telco if mobile is unreachable, but keeps on ringing till it receives a hangup signal. I think this is due to the fact that the message is played without the call has been answered, but I'm wondering if there's some way to let Asterisk realize it. All I see in the CLI is the line

Hi all, I would like to eliminate about 150 lines in log /var/log/messages) every time a call is placed/received If I type, on the asterisk console, set verbose 0 the lines in the log disappear, but it appears to me too drastic as a method.... The lines shown in the log don't appear (at least to me) very critical: no problems at all are shown. Isn't any way to turn off this debug ? I

Hi all, Just a random shot in the dark. Does anyone have/know of a function for the CDF of a generalized error dist? -- Elliot Williams (ewilliams at ucsd.edu) Economics Department, UC San Diego -------------- next part -------------- An embedded message was scrubbed... From: Elliot Williams <ewilliams at ucsd.edu> Subject: [R] Generalized Error Distribution (Exponential Power) CDF?

I apologize, but I can not find a complete list of directives in dovecot.conf possible. where can I find? thanks excuse my for my orrible english -- Caselle da 1GB, trasmetti allegati fino a 3GB e in piu' IMAP, POP3 e SMTP autenticato? GRATIS solo con Email.it http://www.email.it/f Sponsor: Apri Conto Corrente Arancio entro il 28 febbraio 2011 e ricevi 100 euro da spendere su Media

Hi folks, I've already searched the mailing list but no one else seems to have my same problem. I'm using Asterisk with the following configuration: Fedora Core 4 (but I also tried Fedora 3) 1 Digium TE110P 1 TDM40B 1 HFC-S 'Cologne' bristuff 0.2.0-RC8o (zaptel 1.0.9.2) I compiled right, I can load kernel modules but when I try to unload wcte11xp module (the one

I cannot use CVS, is there anoyher way to use direct pickup ? Thanks again Giordano ________________________________ Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Alexander Lopez Inviato: venerd? 16 settembre 2005 17.53 A: Asterisk Users Mailing List - Non-Commercial Discussion Oggetto: RE: [Asterisk-Users] direct sip call

I have the same problem in a box with 2 HFC-PCI, but i already remove the row in modprobe.conf and load the module manually. Both cards works fine Any idea ? Giordano -----Messaggio originale----- Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Julian J. M. Inviato: luned? 27 giugno 2005 12.04 A:

I known. I'm using the 1.44 firmware version relesed on 26 may. I worked for italian IVR an HTTP pgaes. So i can only update asterisk with CVS and try atxfer. Thanks for all -----Messaggio originale----- Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Gavin Hamill Inviato: luned? 30 maggio 2005 18.40 A:

Mine is very similar: i don't have echocancelwhenbridged=yes because it seems work only on TDM, is it ? And in Italy, I often have set pridialplan = unknown About echo I have some problems, but only at the beginning of the call. After 3-4 seconds the echo became almost null, specially with snom 190; with pa168s and ywh10 I have again some problem, the echo come up also after 1 minute of

Good...it almost works fine! I just have 't' in command Dial, but i also have 'T'. Is it a problem ? This is my Dial() exten => 605,1,Dial(${GIORDANO NAT},60,Ttr) I have only a problem: A and B are speaking, B calls C and ask it if wants speak with A, C accept but if B hang up A is waiting and C get busy tone. To make it works B don't have to hangup but habe to press

Ok, but is there a way to check if echo cancellation is active on a call in progress ? Thanks Giordano -----Messaggio originale----- Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Steve Davies Inviato: marted? 28 marzo 2006 16.43 A: Asterisk Users Mailing List - Non-Commercial Discussion Oggetto: Re: [Asterisk-Users] Echo cancellation

Hi all, sorry if my question is too stupid, i''m trying to compile both XEN 4.0 and the kernel but when i do "make world", according to http://wiki.xensource.com/xenwiki/Xen4.0, i always receive this error: + git clone git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git linux-2.6-pvops.git.tmp Initialized empty Git repository in

HI Steffen. In folder /var/vmail/example.com/user_a i've a dovecot-acl file with " user=test at example.com lrwstipekxa " IN mysql table user_shares i set: +---------------------+------------------+-------+ | from_user | to_user | dummy | +---------------------+------------------+-------+ | user_a at example.com | test at example.com | 1 |

Hello I try to run SAMBA with security = ads on AIX 5.3 with SAMBA 3.0.23d. "net ads join" was successful and the machine is now visible in the Domain with the netbios name. When I try to access the shares on the machine the log.smbd files says: (...) [2007/05/10 08:58:16, 1] smbd/sesssetup.c:reply_spnego_kerberos(310) Username MYDOMAIN/MYUSERNAME is invalid on this system

Hi, Thanks for yuor answer. The boot time of the phone is very very fast, 10 sec to startup and 2 or 3 second to login to asterisk. I set the NTP server to 255.255.255.255 so it don't try to get time. I thinked carefully to your scenario and i am going to try it, but i don't known if it could like to my customer I will try also to use CVS, but i am skeptic to utilize asterisk to

Hi. I'm trying to get a Beronet QuadBRI card work with bristuff drivers. Though qozap module loads right, all card spans are in deactivated status. I'm quite sure my configuration is correct and using a single BRI card instead of the quadBRI the status is active and I can place and receive calls. On Beronet installation manual I read that Beronet and Junghanns cards are identical in

Hi BioC user, I have a problem extracting the gene set I would like to work with. Here is I work with my data: normData <- read.delim("normalizedData.txt",sep ="\t") ######### two class unpaired comparison # y must take values 1,2 classes <- c(-1,-2,1,2) #prepere the data for the samr analysis data.x <-as.matrix(normData[,8:11]) d=list(x=data.x,y=classes,

That's exactly what I was looking for. By the way, I discovered Local channels to fork into dialplan. I also discovered that roundrobin policy does not work as I expected, but that's another story. Thanks for help, _fangi_ -----Messaggio originale----- Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Chris Bagnall Inviato: luned?

hello, on Slackware 9.1 I have e2fsprogs 1.34 and lvm 1.0.7. In lvm package I have e2fsadm command;in e2fsprogs package I have resize2fs command. In man page for e2fsadm it refers to ext2online to extend a mounted file system, but I have not that command. Where can I find it? On my system I have resize2fs. is it the same of ext2resize or they are different programs? Are they mantained in parallel?

I got the same problem yesterday and i just ch'ange the kernel from 2.6.12-1.1372_FC3 to 2.6.9 kernel of fedora core 3, and now it work perfectly. I think there is some problems with the new kernel of fedora. -----Messaggio originale----- Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Altus Snyman Inviato: mercoled? 27 luglio 2005