similar to: Setting up an EICON CARD with CAPI

Hello, I have an issue getting the chan_capi module to load in asterisk cvs from today. Plain 2.4.20 kernel with melware patches for the Eicon Diva Server Bri card. I load the modules with: modprobe -v divas divacapi I load the firmware with: divactrl load -c 1 -f ETSI -vd6 Output in /var/log/messages is: Nov 9 19:26:26 voice kernel: Eicon DIVA - DIDD table (http://www.melware.net) Nov 9

Hi list, Does chan_capi work with kernel 2.6? The Eicon Diva server card loads fine judging from /var/log/messages but Asterisk gives an error when trying to load the chan_capi module. I'm using chan_capi-0.3.5, zaptel-1.0.0, libpri-1.0.0 and asterisk-1.0.0 on a Fedora box with kernel 2.6.8-1.584. Zaptel and ilbpri work fine as does *. I have seen a msg that may be related and don't know

Hi! I have some (short) question about the Eicon DIVA (V-)4BRI cards I want to have (short) answered before buying the DIVA card. I know there are several Eicon guys active on the list, thus I ask on the list instead of directly to Eicon so that all other will benefit as well. 1. Do Eicon DIVA (V-)4BRI cards support TE and NT mode? 2. Can the clock (master/slave) be configured independent

Hi (Armin?) ! Today I had a problem with Diva Server 4BRI-8M 2.0. Asterisk 1.2.12.1 chan_capi-cm-0.6.5 divas4linux-melware-3.0.f-106.622-1 Asterisk could not receive and make calls on the BRI ports, although the ports looked fine within Asterisk. I usually use "/usr/lib/divas/divactrl dchannel -c 1" to test line activity. This time there was no activity (cryptic log

Hi, I am trying to configure a Diva Server 4BRI to work with chan_capi. Here are the steps that I took: - compiled fresh kernel with new-style CAPI support: i4l_divas_1.2 - got the divactrl_1.2 utilities, configured the card startup scripts, - rebooted, card firmware loaded properly, "capiinfo" displays detailed info on 4 controllers, however there is an error message: FAC REQ -

Hi! This weekend we had a problem with our Asterisk Box which ran flawlessly for nearly 4 weeks. The Asterisk server sits between the PSTN and a Siemens PBX and bridges 2 BRI lines. No calls, not incoming, not outgoing. The admin rebooted the Dell Box and then everything worked fine again. Now, I'm analyzing log files to find the cause. During the Asterisk outage the logfiles only show

I am trying to use chan_capi with an Eicon Diva Server BRI. I installed the Eicon drivers from source including CAPU and I can use the board correcly using tty_test and minicom over /dev/ttyds01 or /dev/ttyds01. I need to insmod capi ( why? it is not written anywhere) and then capiinfo shows me all board parameters, but I have to break it otherwise capiinfo doesn't exit at all, but I don't

Hello, Does anyone know what driver to use with an "Eicon Diva Server 4BRI" card? My modem.conf: -------------- [interfaces] context=remote driver=i4l msn=16453 device => /dev/ttyds01 -------------- I get the following error: -------------------------- == Loading modem driver chan_modem_i4l.so => (ISDN4Linux Emulated Modem Driver) WARNING[8192]: File chan_modem.c, Line 383

Hi *, I want to integrate the Eicon Diva 4Bri Card to Asterisk. Eicon drivers and capi is installed. I use the latest dev version from eicon compiled and installed for my fedora 2 system. I found the chan_capi for asterisk from www.junghanns.net. Also loaded the patch and applied to the chan_capi source tree. I changed the Makefile to include the capi20.h from eicon:

Heya Mark (and others), Here's an update on my adventures while trying to debug the Zaptel-related panics, as discussed on this list a while back. While debugging the problem, I completely swapped the machine for an entirely different model (Supermicro dual Xeon 2.4GHz with 2Gb of RAM), put the cards in, recompiled * + Zaptel and administered my stress-test. The machine stayed up in excess

Hi Everybody, Has anybody tried the above (or indeed any other 4XBRI cards) successfully with Asterisk. As far as I can see the above mentioned card is an active ISDN card but supported by it's own I4L driver. This leads to interesting questions particularly regarding echo cancellations (which usually doesn't work on the cheap passive cards with one exception as far as I can see).

Currently we have problems with our asterisk server connect with an Eicon Diva 4BRI Card to a PBX. Asterisk is running in version 1.0.0 on RedHat Enterprise Linux 3AS with kernel 2.4.21-4.EL. The Diva server is running in version 7.5 Can someone help us in reolving the errors with incoming calls? When we try to call to an extension we get these messages in the CLI: -- creating pipe for

Hi; I've got an AAH installation where a customer wants to install an active Eicon DIVA BRI card. AAH is built on Centos 3.5 which is currently at kernel 2.4.21.37. Support for Eicon active cards is built-in. I've debugged and run the A@H install-Eicondiva script but when I try to run divactrl load -c 1 -f ETSI -Debug I get a response : A: can't get card type for DIVA adapter

Hello, I want to use a 4 port ISDN card from EICON/DIALOGIC in our asterisk server. The system is a Ubuntu 7.10 with kernel 2.6.23.1. The compilation of the kernel finishes without any problems. I have downloaded and installed the deb-source package that EICON/DIALOGIC offers. Th installation script crashes with the following error messages: # LOG ---- START SECTION read kernel version

Hello Everyone, I am once again wondering about EICON. I have had no success with the Diva Pro or Diva Pro PCI, so my question is, does anyone use an Eicon Server BRI card on Asterisk? Or would I be better off trying to get a split PRI? Regards, Greg

Hello all, I'm having problems getting chan_capi 0.3.5 to work well with an Eicon Diva Server card using using the driver from linux kernel both 2.6.10 and 2.6.12 (vanilla versions). I have a (really two) producci?n system(s) running chan_capi in another identical Eicon Card using kernel 2.4.27 and the Diva Server drivers from Eicon. I installed an compiled the source level rpm

Are there any step by step instrunctions on how to install drivers and I guess bristuff for this card? Just need to use it to handle voice on 2 BRI circuits (UK) then utilise with Asterisk and some Digium cards handling POTS phones (and some VoIP out the back). It's the EICON card stuff and how to make it all work I'm finding confusing? Steve -- NetTek Ltd UK mob +44-(0)7775 755503

Hello, I try to use Asterisk with an Eicon-card called "DIVA Server 4BRI-8M PCI" but I don?t get it to work. I?m running on RH8.0. The Eicon-card supports isdn4linux. In the modem.conf file i have put following: ----------- [interfaces] ; By default, incoming calls should come in on the "remote" context context=remote ; Modem Drivers to load driver=i4l ; Type of dialing

Hi I've got a dell 2550 with an Eicon Diva server PRI card plugged into it. I can call out using the acopy2 test utility. I'm having trouble with asterisk making calls however... my capi.conf and modules.conf looks correct by the wiki instructions - does anyone have any advice on where to look ? I can attach conf files etc. if needed. Asterisk says it has 30 capi channels available,

I have installed Asterisk 1.2.18 am am trying to install chan_capi. The current RPM ftp://ftp.melware.net/Trixbox/chan_capi-1.0.1_1.2.14-1.i386.rpm installs but Asterisk dies on startup. The following appears in the log: May 27 03:28:18 asterisk1 kernel: divas: Diva Server V-4BRI-8 IRQ:7 SerNo:25290 May 27 03:28:18 asterisk1 kernel: divas: started with major 252 May 27 03:54:17 asterisk1 init: