similar to: Aastra phones and common directory?

I upgraded my office server from 1.4.22 to 1.6.0.5 on the weekend and after some testing there seems to be a compatibility problem when using Aastra phones. With 1.6.0.5 all incoming calls to all Aastra phones were dropped after a minute or so. I installed 1.6.1-rc1 and now the newer Aastra phones (5xi) work properly. The problem remains with the older phones (9112i, 9133i and 480i). If I dial

I have a customer that has recently upgraded their network and now their Aastra 9133i phones are loosing their connection to the Asterisk server. They were using an external Asterisk server and now we have installed a new internal server with Asterisk 1.4.8 on a SIP/IAX implementation with no Zap cards. Only hard phones seem to be having problems keeping a connection to the server, soft phones

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20060111/d66d1599/attachment.pgp

Getting "no service" display on aastra 480i. Sip debug shows an "unathorized" blub when the aastra tries to register. Some reading indicates that 1.4 firmware wants aastra.cfg and mac.cfg in /tftpboot/. There are none. Anyone have basic config files? Or can point me to a good link? All links I have tried, that purport to have config files, are either dead or error out.

Hi. Does anyone have a patch or workaround for the 50 BLF limit of Aastra phones? I have a couple 57i with the 560M console and only the first 50 BLF lines get registered. I am using the latest firmware from Aastra but I read that this limit was imposed because of a memory leak. Obviously my customer is complaining about these last 10 lines not showing their status. -- Telecomunicaciones

> > Allen Casteran wrote: > > Anyone know what the POE draw is for the Aastra 480i phones? > > We have switches that will do 15 watts on 12 ports but only do 7.7 watts on all 24 ports. > > A Cisco 3560 switch will do 15.6 watts on all 24 ports. > > Just trying to find out if we need that much power. > Drew wrote: > According to Aastra tech support, 5 watts

Anyone know what the POE draw is for the Aastra 480i phones? We have switches that will do 15 watts on 12 ports but only do 7.7 watts on all 24 ports. A Cisco 3560 switch will do 15.6 watts on all 24 ports. Just trying to find out if we need that much power. Can't seem to find any info on the Aastra site. Comments?

Does anyone have success in upgrading Aastra/Sayson 480i CT firmware? All I get, no matter what I've tried is "Unable to upgrade firmware". tftpd is working because the dialplan freshens, and I have aastra.cfg whatevermacaddressfile.cfg and firmware.st in /tftpboot Am I missing something stupid? Is there another way to upgrade it? Chris Coulthurst chris@shuksan.com

Hi Folks, Looking for feedback on the cordless phones with the Aastra 480i CT handset. Is voice quality comparable to standard consumer residential 2.4GHz cordless phones in the US$30 - $50 price range, or better/worse? How about handset and speakerphone quality for the main phone? Seems like there have been various big issues with firmware in past, but is it pretty stable now? Thanks,

I have this Aastra 480i phone, and you can set the TFTP server IP address manually in the phone, but there should be a way to have it find the TFTP server information via DHCP. Does anyone know if this is possible, and if so, what is the attribute I have to set on my DHCP server? Thanks! __ Dana Olson Disclaimer: The information transmitted in this message is intended only for the person or

Hi, I need to make use of BLF feature on Aastra 6757i phones but its an Asterisk 1.4 using realtime architecture. Extensions are defined in realtime database and dial plan is in AEL. I am able to correctly setup hints in the dialplan, but they don't work. Did some research and found out that hints don't work work with realtime extensions. Is there any work around? On voip-info I read

I just bought an Aastra 480i CT for a client who needed cordless capabilities in their office. I'm trying to set up the base station and cordless handset in my office first. I'm able to connect the phone to my Asterisk box and make outgoing calls from either the base station or the handset - to extensions within my office as well as numbers outside the network. But I can't

Just found out my maintanence agreement with fonality does not cover phones over a year old. So, of course, they don't repaird phones, only replace them. Very worldly of them... Anyone know where I can get an Aastra 480i repaired? The phone works on speakerphone, but when you lift the receiver offthe hook, the phone does not engage. There is something wrong with the "hook". The

After upgrading to 1.8.3.2 today, I notice that my Aastra 480i SIP phones no longer initiate hold music when a call is placed on hold. I seem to be having the same issue as the person here: http://forums.digium.com/viewtopic.php?f=1&t=77553 Has anyone else run into this issue? -- Anthony - http://messinet.com - http://messinet.com/~amessina/gallery 8F89 5E72 8DF0 BCF0 10BE 9967 92DC 35DC

Sorry for being a little off topic, but I'mconsidering a few new phones for my Asterisk installation. I have a mix of Polycom 500/600s and an Aastra 480i CT. I'm considering adding a couple of Aastra 57i or 57i CT. Does anyone here have experience with the 480i CT and the newer 57i CT? I'm curious as to the real differences. Thanks, Michael Graves Sr Product Specialist Pixel Power

Are the cordless phones on the 480i CT from Aastra registered independently in Asterisk? Such that if I have 5 of the cordless phones hooked up, each one is it's own "extension?" ________________________________ This e-mail, facsimile, or letter and any files or attachments transmitted with it contains information that is confidential and privileged. This information is intended

Having scoured the web, I still am no better off .. I have 2 Aastra480i's , and 120+ cisco 7940's :) . I am trying to decide which model to use going forward when we purchase more kit. They both seem much on a par regarding features. Q1: Is there anyway of making the cisco auto-answer _without_ having to manually edit the configuration on each phone ? I've been able to get the

I have read the user reports on the Aastra 480i SIP phones, but the last report is from October, and the advice was to stay away from these units. I was looking at the cisco 79XX series or the SPA-941's, but they don't have backlit displays. I also like POE support so I don't have to run multiple wires to the phones and makes for a neater look. I dislike the looks of the SNOM

I need to provide a 80 people office with VOIP. I want to commit to one vendor Polycom or Aastra. Price of the phones is not a factor in the decision. The quality of the phones is the factor. Some of the features that I am evaluating on are: (arranged in order of priority) 1. Sound quality 2. complete product line with conference phone and receptionist phone (not on Aastra) 3. cordless (not on

There is no release note, just a text file that says AASTRA TELECOM INC. February 2006 FC-000046-01-07.st - 9133i Generic SIP Firmware 1.3.1.1095 for customer release. ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Gareth Owen Sent: 15 February 2006 02:00 To: asterisk-users@lists.digium.com