similar to: clid and src fields wrong in cdr

I have a very strange problem I'm hoping someone has encountered already. I've scoured the internet for an answer to this one. My phone company provides no disconnect supervision. Hence I'm forced to use the busydetect feature. I have a TDM400 with two FXO ports. If I call from an internal extension to a landline and then hangup the landline Asterisk detects the busy signal

Hello, After installing on Ubuntu 10.04 using the tutorial on http://hmontoliu.blogspot.com/2010/03/installing-asterisk-and-freepbx-on.html I have a running instance of Asterisk. PROBLEM: result of dahdi_cfg: DAHDI Tools Version - 2.2.1 DAHDI Version: 2.2.1 Echo Canceller(s): MG2 Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2)

I am trying to use misdn insted of zaphfc to drive two billion isdn cards zaphfc is ok, but the problem with cdr and the fact tha you always have to wait the bristuffed version of asterisk took me to try another way. so I downloaded the misdn installation script from beronet for the last version ( I am using asterisk stable 1.2, so now is 1.2.5) wget

Hi All, For some reason since moving to Asterisk 1.6. my CDR records are no longer displaying the Clid field. The CDR records contain the Source field be for some reason not the CID details. I am logging CDR to mysql. Is anyone able to help? Regards David. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I am using asterisk 1.4.28 with freepbx and Wildcard TDM410P card. Everything is working fine except the caller ID of incoming call from PSTN line. The phone display is showing "Unknown" when there is an incoming call. *My log file showing this while an incoming call on PSTN line:* tail -f /var/log/asterisk/full [Dec 30 06:36:16] DEBUG[2559] dsp.c: dsp busy pattern set to 0,0

Thanks in advance root@asterisk01:~# modprobe wcfxo /lib/modules/2.4.20/misc/wcfxo.o: init_module: No such device /lib/modules/2.4.20/misc/wcfxo.o: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.20/misc/wcfxo.o: insmod /lib/modules/2.4.20/misc/wcfxo.o

After working fine for a week or so my new Quad E1 asterisk 1.8 system has started rejecting outbound calls from the Nortel BMC 450 it is connected to. The cli fills up with these: sig_pri.c: Ring requested on unconfigured channel 255/255 span 3 Is this likely to be a 1) config error 2) cable issue (I made them) 3) hardware problem with the Digium card 4) software (lib pri) Any clues?

Hi; I have problem inserting cdr to mysql,Asterisk has logged to asteriskcdrdb successfully.It says: Dec 6 13:36:26 DEBUG[1221985728]: cdr_addon_mysql.c:178 mysql_log: cdr_mysql: inserting a CDR record. Dec 6 13:36:26 DEBUG[1221985728]: cdr_addon_mysql.c:197 mysql_log: cdr_mysql: SQL command as follows: INSERT INTO cdr

Hi, I know it sounds weird, and this is part of the reason I have not reported that sooner. As I upgraded from 1.6.2.x to 1.8.x several months ago I am experiencing this problem. If a call is initiated from a DAHDI extension after no DAHDI extensions were used for some time, arbitrary DTMF digits are skipped and the call fails. If the call is redialed it goes through. Normally just one (1)

Hello All I am trying to answer incoming SIP calls, first, by dialing an extension, thence into voicemail, which works; and secondly by going straight into voice mail which does not. The extension.conf that works is like this; [incomingSIP] exten=>_.,1,Dial,Zap/2|1 exten=>_.,2,Voicemail,u5152 exten=>_.,3,Hangup the extension.conf which does not is like this; [incomingSIP]

I used the "FreePBX on Debian" HowTo at http://powerontech.com/freepbx-on-debian.htm to install. I use callfiles to initiate calls to my SIP carrier. They get my registration, but they see that my call is interrupted before they can complete the connection. My Asterisk log shows that the call times out after the time (45s) specified in my dialplan Dial() command. What is wrong? [from

Hello I just settup a realtime mysql table for sip_peers. All peers (friends) is autenticateing but when i want to initiate a call between them i got the following error. Someone have some ideea? Thank you. ---<Cut Here>--- pbx*CLI>console dial 1014 == Console is full duplex -- Executing [1014@default:1] Dial("OSS/dsp", "SIP/1014|40|t") in new stack

So I'm noticing from the docs/ on Asterisk Addons 1.4.10 that the database structure for cdr_mysql is: CREATE TABLE cdr ( calldate datetime NOT NULL default '0000-00-00 00:00:00', clid varchar(80) NOT NULL default '', src varchar(80) NOT NULL default '', dst varchar(80) NOT NULL default '', dcontext varchar(80) NOT NULL default '', channel

Hello, I am having an issue whereby calls are being dropped randomly. I have an ISDN 30 E1 line going into a Wildcard TE220 (4th Gen). My Asterisk install is based on Trixbox 2.0. However, I have updated the source code to the following. The Asterisk release is asterisk-1.2.20. Zaptel release is zaptel-1.2.18. And libpri release is libpri-1.2.4. I have include an extract from the Asterisk log

Hi i have an issue getting agentLogin working /etc/asterisk/queues.conf member => Agent/1001 member => Agent/1002 extension.conf exten => 110,1,Wait,1 exten => 110,2,AgentLogin() now, i call 110 by a firefly client, trying to login in as 1001 agent: Aug 12 16:31:36 DEBUG[1103408048]: chan_sip.c:4423 build_route: build_route: Contact hop: <sip:sip3@192.168.1.151:5060> --

> > Hi, Remove usecallingpres=yes busydetect=yes from your zapata.conf file. and the restart asterisk. Hopefully you will not faced drop call issues. Regards, Vidura Senadeera. Message: 3 > Date: Mon, 24 Sep 2007 12:29:40 +0100 > From: "Richard Young" <Richard.Young at intrintech.com> > Subject: [asterisk-users] Asterisk Dropping Calls > To:

Hi, I'm currently running CVS-HEAD 2005-09-03 I do plan to upgrade to the newest version, but need to do some testing with it first. In the mean time... does anyone know what these messages below are about? I've never seen it before, but when it happened it locked Asterisk up pretty good. Feb 10 10:16:51 DEBUG[14917] chan_zap.c: Echo cancellation already on Feb 10 10:16:57

Hi all, Have been experimenting with agents and queues instead of placing calls direct to a user's phone extension, but I've run into problems with calls to both the agent and the extension which creates a zombie and double records calls abandoned etc. We're using a unique queue for each agent (only a handful of users) to try and get some agent/queue information to see what the

Hi, Returning to my office I find two "missed calls" (from autodialers) that my IP601 displays as originating from 01111111111. However the CDR database recorded the call this way: calldate: 2008-04-04 14:18:16+02 clid: 0172752780 src: 0172752780 dst: 2131 dcontext: default channel: Zap/1-1 dstchannel: SIP/0146472131-007a7e80 lastapp:

Can someone tell me what is wrong here: Feb 2 19:45:44 ERROR[1074441696]: cdr_addon_mysql.c:381 my_load_module: Failed to connect to mysql database asteriskcdrdb on localhost. The database is created, cdr table also, the username and password is right. I have tried configuring cdr_mysql.conf to connect via localhost mysql.sock or via tcp port, but in both cases I got this error. Thanks!