similar to: Call completes but then drops?

Hello to all, I post again (last time subject: Line drops strange problem(got event On hook) because i have caught in debug a situation where i get a call and the line drops and i get a call from the same caller and the line works well and the call normally closes by both parties. The only differences i find are underlined. If someone can understand the reason why the line drops from the debug

Hello to all, I have a strange problem with my asterisk. Line drops while i am in a call and without a reason.The line drops no matter if it is a incoming or outgoing call and it happen while i am talking on the phone (no silence detection problem). I tried to debug the situation and the only strange thing is the "got event On hook" (i guess..). I am thinking that it is a problem

Apparently we've been having calls sporadically drop. We're using an IAX outbound trunk and SIP adapters on the inside. Below is a log excerpt detailing one of the calls which dropped, and it looks largely normal to me except for this: Jan 5 13:31:07 DEBUG[3776] channel.c: Didn't get a frame from channel: IAX2/teliax-2 Jan 5 13:31:07 DEBUG[3776] channel.c: Bridge stops bridging

Here i am doing a dial command from a php agi... EXEC DIAL H323/123456789@xx.xx.xx.xx:1720|40|HL(585000:61000:30000) But asterisk is not disconnecting the connection after 585 secs... the result is ... answered time is 1926n but thing is time out is working some time and some time not.... LOG: 2005-06-28 20:26:13 VERBOSE[19094] logger.c: callcard.php: string(111) "app_callingcard:

Hi, I have 2 systems (A and B). I have an 800 number... when someone calls the 800 number it goes: IAX2-->A---IAX---B--->SIP PHONE However.. if the user calling the 800 number is a SIP user that is registered to A it goes: SIP--->A---IAX---B--->SIP PHONE This is the problem... when a call comes in from the IAX2 800 provider, things work fine... however if a SIP user registered to

-----Mensaje original----- De: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]En nombre de asterisk-users-request@lists.digium.com Enviado el: jueves, 02 de febrero de 2006 10:15 Para: asterisk-users@lists.digium.com Asunto: Asterisk-Users Digest, Vol 19, Issue 15 Send Asterisk-Users mailing list submissions to asterisk-users@lists.digium.com To

Hi, I have 1.2.9.1 installed. It always rings first available agents for 15 seconds, then rings and hangs up the next agents straight away, then ring the next agents for 15 seconds. It goes as a loop. Any one has the following same problem? Thanks. Agents.conf [general] persistentagents=yes [agents] autologoff=60 wrapuptime=15000 ackcall=no group=1 agent => 7130,7130,agent1 agent =>

Using tdm400. While transfering a call from outside to another extensions, while this "outside call" is waiting with music, the "another extension" call hangs up suddenly, and the call is back to the "outside call" suddenly. Wathcing logs: Jan 15 13:32:44 DEBUG[30148] res_musiconhold.c: Read 462 bytes of audio while expecting 640 Jan 15 13:32:55 DEBUG[27850]

Hi all, Have been experimenting with agents and queues instead of placing calls direct to a user's phone extension, but I've run into problems with calls to both the agent and the extension which creates a zombie and double records calls abandoned etc. We're using a unique queue for each agent (only a handful of users) to try and get some agent/queue information to see what the

On 1.2.x I have a random problem when a Zap/x channel flashes to transfer or make a three way call. The Zap/x-2 channel is created and the transfer or three way proceeds, but on hangup the Zap/x-1 channel fails to destroy the old bridge and asterisk goes crazy logging the problem. Here is an example debug log. This happens only once a day or so, with 100 or so users transfering and three

Hi, Does any one experience that SIP phone to SIP phone (Polycom phone) calls can't hear each other, but Monitor application records both end's voices. It also happens in group pickup calls. Zap calls to queue (Local channel) also experience this problem (sometimes, our SIP phone can't hear any voice from incoming Zap calls when pickup, sometimes this happens after 10-50

Hello, I am having an issue whereby calls are being dropped randomly. I have an ISDN 30 E1 line going into a Wildcard TE220 (4th Gen). My Asterisk install is based on Trixbox 2.0. However, I have updated the source code to the following. The Asterisk release is asterisk-1.2.20. Zaptel release is zaptel-1.2.18. And libpri release is libpri-1.2.4. I have include an extract from the Asterisk log

> > Hi, Remove usecallingpres=yes busydetect=yes from your zapata.conf file. and the restart asterisk. Hopefully you will not faced drop call issues. Regards, Vidura Senadeera. Message: 3 > Date: Mon, 24 Sep 2007 12:29:40 +0100 > From: "Richard Young" <Richard.Young at intrintech.com> > Subject: [asterisk-users] Asterisk Dropping Calls > To:

I tried to add a couple of SIP phones (polycom 601s) to my existing asterisk installation. I can successfully make a call from the SIP phone to any other phone (inside or outside), but I can not make any calls to a SIP phone. Attached are the pertinent parts of sip.conf and extensions.conf. The log starts off normal with: Mar 26 09:51:15 DEBUG[4885] chan_zap.c: DTMF digit: 2 on Zap/55-1 Mar

I've been monitoring this problem for almost a month now. I realized that it is more extensive than what I described previously. I can very easily replicate this problem on every Zap channel. Following is the senario: 1. Call Zap/5 via say SIP/15 -> Zap/5-1 created and starts to ring 2. Call Zap/5 via say SIP/21 -> Zap/5-2 created and starts to ring 3. Hangup SIP/15 ->

Hello, I'm running Asterisk@home 2.5 asterisk 1.2.4 zapatel 1.2.2 libpri 1.2.2 on a Dell Poweredge 2850 (1 CPU) with a TE210P I have 2 t1 circuits using NFAS with dchan on 24 and no backup dchan. I am able to receive inbound calls on all channels and can only make outbound calls on channels 25-48. Attempting to make an outbound call on channels 1-23 results in congestion.

Hi, What do I have to do to get local\number to work in a context? It works from my [from-internal]... however from subcontexts it does not work: Jan 6 15:55:32 VERBOSE[20237] logger.c: -- AGI Script Executing Application: (Dial) Options: (Local/570323xxxx) Jan 6 15:55:32 NOTICE[20237] chan_local.c: No such extension/context 570323xxxx@default creating local channel Jan 6 15:55:32

I have a situation when I dial out my Zaptel I am getting a recording that I need to add a 1 or a 0 and the area code with this number. I have tried appending this and the number going out the zap is 1NXXNXXXXXX so it is going out with 1 and the area code. Someone has suggested that maybe the zaptel is dialing too fast. My question is how can I add a pause before dialing to test this out. I am

Hi, I have an Asterisk 1.2.9.1 box on a Debian distro with mISDN drivers. I installed the new driver (0.3.1-rc30) on our pbx but since no voice was passing I decided to go back to old version (0.3.1-rc23). Last friday everything seemed to work fine but now every incoming call drops after 3-4 seconds while Asterisk console is showing these messages: Apr 23 12:42:39 DEBUG[7625]:

Hey everybody, I've, within the last 3 weeks, moved over to a PRI from SBC/AT&T. I've received several complaints about dropped calls. Reviewing the archives on PRI and dropped calls shows that I should set the resetinterval=never in the zapata.conf and restart. This hasn't helped. The dropped calls have to date only been on outbound calls. Usually within 2 to 3 minutes