similar to: Unable to do anonymous outbound calling

Hi all, A few days ago I found out with help of some of you guys how to set CLIR. (Calling line identification restriction) My first idea was to use the keypad protocol to set the CLIR with dialing *31* before the number but this was not possible. So thanks to Damon Estep I got it to work with executing 'SetCallerPres(prohib)' before the dial command. This works perfectly! But now

I have a little call recording script that I am running and it works fine, but I have one problem. I get CDR when a user calls into the extension, but I do not get CDR for the call that it makes outbound on # 17. Any idea why? Here is the extensions info: [default] exten => 2211,1,Answer exten => 2211,2,Wait(1) exten => 2211,3,Playback(/etc/asterisk/recording/getshop) exten =>

Hi, Using * 1.2.5 with a euro_isdn PRI I need to hide the callerID on certain extensions. I have usecallingpres=yes in zapata.conf, and am using SetCallerPres(prohib) in my dialplan prior to the Dial command. No matter what I set SetCallerPres to the CID is still displayed. Is there something else I need to make this work? I can't just set the CallerIDNUM to null, as it is needed for

Hi, I am using: Asterisk 11.2.0 libpri 1.4.12 Dahdi: 2.6.1 Sangoma E1-Card with Wanpipe-Drivers 3.5.28 I call my asterisk box via SIP and connect the call to an AGI-Script. Within the script I do EXEC SetCallerPres prohib or EXEC SetCallerPres prohib_not_screened But I get the following error: ast*CLI> == Using SIP RTP CoS mark 5 -- Executing [100 at sip:1]

Does SetCallerPres(Prohib) remove the ANI data from a SIP call or does it simply set a flag telling other devices not to display the data? In other words, could another system override that and see the caller ID anyway? The answer may affect how I handle 911 calls, so I'm very curious.

Does anybody know if SetCallerPres works on calls via SIP through a Cisco gateway? We are trying to mark outbound calls as anonymous and we set it to prohib, but calls still show outbound callerid. We are SIP from * to the Cisco gateway and then PRI outbound. If we strip the callerid num, then the first number on the PRI gets added as teh callerid, so we can't do that. We need to make

Hi All, I got this figured out, when the privacy is ON at the other end of the server and when we get the Invite message to the server connected to PRI's, just take the details from the invite message in the Dial plan and send the calls as anonymous: exten => _1NXXXXXXXXX,n,Set(PRIVACY=${SIP_HEADER(Privacy)}) exten => _1NXXXXXXXXX,n,ExecIf($["${PRIVACY}" =

Michel Send me the same output for a dial string that only sends the *31* Is this an ISDN line? What type of card/signalling/switchtype are you using? It looks as if the PSTN switch accepts the *31* and then hangs up so you can make the NEXT call with the *31* feature enabled. If so I assume the *31* feature will be enabled for the next call on the ENTIRE SPAN if it is an ISDN trunk group. If

> Hi Gareth Blades & Doug, > > Thanks so much for for the feedback. I have searched on lot of documents > but couldn't able to find clear answer regarding it. > > I hope you guys replies are very much help all in aterisk community. > > > Thanks & Regards, > > Vidura Senadeera, > > Network Engineer, > > Debug Solutions > > Sri Lanka .

Hi all, I'm using Asterisk 1.0.9-BRIstuffed-0.2.0-RC8o on box A with a TE410P (EuroISDN cpe) connected to another similar asterisk box B acting as EuroISDN master. I'm performing some load tests by contiously feeding up to concurrent 30 call files to /var/spool/asterisk/outgoing/ on box A which inititate via a dialplan context/extension a outbound call (redirected via chan_local) to

Tobias Wolf wrote: >Lets say i have a configured number range from 1000 to 1999 and 1000 is >my base number. I make an outgoing call from a phone which sets its >CallerID to 1500. > >Can anyone be so kind to tell me what is shown to the callee in either >case? > I can only tell you, that after I set exten => _0[23456789].,1,SetCallerPres(prohib) the callees phone

Hi all, I'm running a stable Asterisk on a HP DL380G2 1.4Ghz 0,5GB RAM equipped with 1x TE410P and 2xJunghanns QuadBRI running in NT-mode. Connected to the BRI-Ports are 12 Fax-Modems (Elsa MicroLink ISDN/TL V.34) which are only operating in dial out analog mode to deliver fax messages. After a while of running fine (50-200 dial out connections) on some S0 spans the following message occurs

Hi, I just installed spandsp 0.0.3pre6 with libtiff 3.7.1 and evrythinghs is ok. I recompiled asterisk and run ldocnfig, but whrn I start asterisk I get this error: [app_rxfax.so]Jan 12 16:40:42 WARNING[1569]: loader.c:258 ast_load_resource: /usr/lib/asterisk/modules/app_rxfax.so: undefined symbol: fax_set_phase_d_handler Jan 12 16:40:42 WARNING[1569]: loader.c:440 load_modules: Loading

I'm having trouble setting the outbound caller ID on calls I make from my PRI trunk group. The PRIs are served out of a 5ESS. Telco has set the PRIs up for user provided caller id information, so I believe I just don't have it set up right in my dialplan or something. I can't seem to find an example of setting the outbound caller ID specifically for a 5ESS. Does anyone have an

I there, I have some trouble to do working caller id name for outgoing calls on the PRI we just installed. Caller id name work on incoming calls only. Caller id number work on incoming and outgoing calls. The provider, Goup Telecom, said that's in what i'm sending. They said that I send the cid name in ascii code and to do it working, I need to send it in hex. So I take some traces

Hi all, does anybody know how to make on-demand anonymous calls? I've tried code *67# before the number to call but it is working with some providers only. Any hints? Thank you.

Hi, I'm trying to configure a Linksys/Cisco SPA8000 talking SIP to both a local Asterisk server and also with a trunk directly to a VOIP provider. Everything works great, except I'm having a problem setting the outbound caller ID to a value different from the SIP username/authname. The SPA8000 has SIP setting for Display Name, User ID, Password, and Auth ID, as well as a "Use Auth

Hi all, I just posted this question before last week. Meanwhile after upgrading Asterisk 1.0.7-BRIstuffed-0.2.0-RCg to 1.0.8-BRIstuffed-0.2.0-RCh the same problem occurs, but seems to be more seldom. Attached is now the output of "zap show channel" . - I'm running a stable Asterisk on a HP DL380G2 1.4Ghz 0,5GB RAM equipped with 1x TE410P and 2xJunghanns OctoBRI running in NT-mode.

As an employee in the technical operations of a CLEC this information is easily obtainable by anyone that has access to the Class 5 switch servicing that PRI... A Q.931 trace in the Class 5 Switch will tell the whole story.... -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Rich Adamson Sent: Tuesday, June

Hello, on my ISDN phone I can configure that on the next outgoing call, my telephone number should not be transmitted, instead it should be UNKNOWN. How can I configure Asterisk to do the same? Is this a feature/parameter of the driver (chan_capi) that I'm using? BTW: I'm using ISDN and Deutsche Telekom, if the provider makes any difference. Thanks for your help, Stefan --