similar to: Grandstream Budgetone mass deployment?

Hallo! Anyone tried connect PC port of BT-102 to Mac mini? I have four BT-102. Looks like none of them works with Mac mini G4...

Is anyone else having an issue with GXP-2000s and transmit gain? All my other phones are fine on my TDM400P with txgain set at 0, but the GXP-2000 caps at about a third of the scale in ztmonitor. I'm getting people complaining they can't hear me on my GXP-2000s, whereas my Snom 320 and Polycom 301 are great, and my Budgetones are overmodulating. Is there any conceivable fix on the

I am setting up a small Asterisk system for use at home. I have one Budgetone 101, one Cisco 7960 and two Xten lite softphones. So far everything is working expect for an issue with the Budgetone. When a call is placed between the Budgetone and any other phone, the call is setup and sounds good. If I hang-up on the Budgetone, everything is ok. If I hang up on the other phone, the Budgetone

Does anyone know what the Grandstream Budgetone is going for $$$ in the US? I didn't immediately see pricing on the phones page. AJ

Hello guys, I ask you to share your experience with your BudgeTone 100.... I have my asterisk @ work and I've bought a GrandStream BudgeTone (SIP phone) and I usually use X-Lite I have plugged my BudgeTone into my home network because I want to be called even at home. I succeed to register my X-Lite with Asterisk from home but I can't do that with my BudgeTone. (I don't know

Is anyone using this combination successfully? I have a dell 500sc running rh9 and asterisk 1.0rc1. It is configured with an x100p. I have a Sipura SPA-2000, laptop with Xlite and a Grandstream Budgetone BT-101. I have signed up with Voipjet (they use iax2). I also have an FWD number via iax2. I can sucessfully call back and forth to all devices via zap, sip, and fwd. I can successfully

Maybe I'm loosing my mind but I've just noticed that if I put a call on speakerphone and I press speakerphone again it hangs up the call, you would expect it to take the call off speaker back on to the hand piece. I'm using V 1.0.5.22 firmware. Is there any other way to turn off speakerphone I'm missing? Cheers, Dean -------------- next part -------------- An

I have upgraded the GXP-2000 to the newest firmware 1.0.1.12<http://1.0.1.12>and the phone is much more usable However, I still have two slight sound quality issues: 1) There is static on the line at all times. It is not that noticable to me, but when I make calls out the PSTN the person on the other end hears it. If I use a Cisco ATA with an analog phone and call the same person again

Hi all, thanks to the all of you. This list is very interesting also for a newby like me. My problem: I just setup my first full working asterisk installation with this config: 1. n.1 GXP-2000 2. n.4 Budgetone 102 3. n.1 TDM400p (3 FXS, 1 FXO) Everything seems to work fine, but the sidetone... it's really annoying! We can hear the sidetone only when we call to the outside (PSTN), it

I bought three plus two Grandstream BudgeTone 101 phones. The shipping cost more than the phone itself from Pulver store. The first shipping had one phone defect. Nothing on the display. (Can happen!) The second shipment had one phone with a defect display, but it still worked. The second phone's handset was defect too (microphone did not work). Changing the handset from this one to the

Symptom: Phone after about 15mins will stop functioning Problem: DHCP lease renewed but default route dropped Fix: Assign a static ip and problem is resolved. Upgrade to new firmware once it is released It turn's out that these phones have a few issue in 1.0.3.81 firmware. The phone may stop transmitting packets if configured with DHCP, if DHCP is being provided by certain devices. Netopia

Hi all, I have to buy some IP phones. Previously I have used Grandstream GXP-2000, Budgetone 101 and Linksys SPA-841. I always had problems with sound quality with all of them, and I was always of the opinion that it were the phones which were not good. In GXP-2000 deployment of about 50 phones, some work good, some have sound problems like words missing, clicking sounds when talking, and some

I logged a bug I wanted to see if anyone else is having this problem or if it's just me. http://bugs.digium.com./bug_view_page.php?bug_id=0000486 I just downloaded the newest version from CVS(Tuesday@~7pm) and I am getting an error whenever I call the asterisk box. I cannot here any audio on the budgtone. This works fine with my pingtel phone and my sip 7960. Also if I call my Skinny 7960 it

Hi everyone, This is off topic and is for GS technical support really but it seems that there are a lot of Budge Tone 100/101/102 users out there. I've got a Budge Tone-100 (101 - without the extra 10base ethernet connetion?) here. I changed the configuration through its web based interface and I clicked the reboot link. But then something went wrong and ever since then it doesn't

I have two problems with Asterisk and my Budgetone 100s. 1. Sometimes when outside callers dial my Budgetone it will ring twice, then the caller will receive a busy signal. This happens intermittently and I cannot pin down the circumstances of when it works and when it doesn't. Asterisk logging doesn't give me too much info when this happens: *CLI> -- Executing

After reading about these $75 SIP phones on this list, I purchased a couple for evaluation. They do work with asterisk - and are good value for money, but as somebody commented: they are not yet perfect. I just wondered if anybody had managed to get either the message-waiting indicator or the conference button to work? Phil Skuse <phil.skuse@vicorp.com>

Hi Folks, Since there isn't a grandstream forum AFAIK I guess someone here may be able to shed some light on this. Apologies if this is viewed as offtopic.. I think I may have killed the firmware on my Grandstream Budgetone 101. I found a source for the 1.0.5.30 firmware and made the files available over tftp. The phone downloaded the files but now doesn't boot and hangs with a blank

Hi there, I'm having problems with the Grandstream Budgetone 101 on hangup - "show channels"/"show channels concise" output is still showing the call's channels as active. The problem does not exist when I use SJPhone, so I'm assuming it isn't an Asterisk configuration issue. Has anyone seen this, or better, does anyone have a fix? :) Thanks, David. --

Hi, I am thinking about getting some of these phones to use with my Asterisk system.. So I would be interested to hear from the people who have tired and tested these phones.. What is the voice quality like using alaw/ulaw or G.729?? Are there any problems getting them to play nicely with Asterisk?? How sturdy is the construction (reciever, handset, buttons, cable connections, etc..) ?? How

I've looked through the archives - and see questions similar to mine, but no answers. What, if anything, can be done to get the incoming Caller ID to be presented on the Budgetone's Caller ID display? In all other respects the phone+Asterisk seem to be extremely happy with each other.