similar to: NEAX 2000 IVS Integration

Hi, How can I make calls from Asterisk client to NEC NEAX 2400 traditional phone ? Is it possible to have a connection between Asterisk and NEC NEAX 2400, since NEC-NEAX2400 is an IP-PBX and supports SIP. Please help me to find a solution ;;; Thanks & Regards Ram Kumar Customer Support Engineer Barcode Gulf LLC Dubai , UAE Mobile : + 971 50 5594178 Email : Ramkumar@barcodegulf.net

Is there anyone out there who has tried to connect up an asterisk box to make and take calls through a NEC NEAX 2400 using Q.sig or anything like it? Can anyone tell me if it is possible? Thanks in advance, Phil Allred Brooklyn Law School

hi. i connected Asterisk to an NEC NEAX system with a crossover T1 cable and the Digium TE405P using E&M wink signaling. the connection's ok. however when dialing from the NEC to the Asterisk. most of the time the Asterisk only sees the first digit of the dialed number(which is 4 digits). some time if i dialed the 4 digits very fast it might get through. seems like there's a timming

OK, background/config. running * (show version reports 0.9.0) on Mandrake 9.2 (kernel: 2.4.22-32mdk) with a dual 800mhz PIII with 256M Ram 4port FXO digium card, no IRQ sharing I can find (cat /proc/pci & cat /proc/interrupts), vmstat reports a minimum of 80+% CPU idle when problem occurs. connect to a Grandstream 101 (GS) via vpn (no nat). Link has 100ms - 150ms ROUND TRIP latency

Does Asterisk need a sound card or functional Console/dsp to answer inbound DID number from PRI and playback .gsm files? I can call from any of the SIP extensions on Asterisk and hear audio from Playback(), MeetMe(), or MOH. The problem I am having with calls from my PRI is as follows: I have an Asterisk (CVS-HEAD-08/25/04-20:28:51) currently interfacing a NEAX 2400 IPX with PRI. I have a

Dear all, Hope this question is not too trivial... In order to correct standard errors from an estimation of a fixed effects regression model y need to extract the vector of standard errors of the coefficients of a simple linear model estimated using lm(var1~var2+var3+var4) Unfortunately I can't find out the corresponding function. Thank you very much for your help. Uli -- Uli

This patch cleans up some 80-odd warnings I was seeing when compiling the xenpci driver, all completely trivial. It also replaces the use of asm for calling cpuid with the __cpuid compiler intrinsic, and modifies calling code accordingly. I''m pretty sure my mailer going to mangle the inline patch (below) so I''m attaching the pristine version. (will try to fix for next time) --

Dear R useRs, I have a problem with nls.lm function of minpackl.lm package. I need to fit the Van Genuchten Model to a set of data of Theta and hydraulic conductivity with nls.lm function of minpack.lm package. For the first fit, the parameter estimates keep changing even after 1000 iterations (Th) and I have a following error message for fit of hydraulic conductivity (k); Reason for

I'm working with an historical image that may be (one of?) the first uses of gray-scale shading to show the pattern of values in a matrix/table, later used by Bertin in his 'reorderable matrix' and sometimes called a scalogram. The image is at http://euclid.psych.yorku.ca/SCS/Gallery/images/Private/scalogram.jpg The rows refer to the arrondisements of Paris, the cols to various

Trying to install Java JRE, but getting this error: ronv at speedy:~/temp$ wine jre-1_5_0_16-windows-i586-p.exe err:service:validate_service_config Service L"Mscromw" has an unknown service type err:service:scmdatabase_load_services Invalid configuration of service L"Mscromw" - skipping fixme:sfc:SfcIsKeyProtected ((nil), (null)) stub fixme:advapi:RegisterEventSourceA

In order to allow for CBC to be chained, which is something that the CTS template relies upon, implementations of CBC need to pass the IV to be used for subsequent invocations via the IV buffer. This was not implemented yet for virtio-crypto so implement it now. Fixes: dbaf0624ffa5 ("crypto: add virtio-crypto driver") Cc: "Michael S. Tsirkin" <mst at redhat.com> Cc:

In order to allow for CBC to be chained, which is something that the CTS template relies upon, implementations of CBC need to pass the IV to be used for subsequent invocations via the IV buffer. This was not implemented yet for virtio-crypto so implement it now. Fixes: dbaf0624ffa5 ("crypto: add virtio-crypto driver") Cc: "Michael S. Tsirkin" <mst at redhat.com> Cc:

Hi there, I'm trying to prep some data for a persp() surface plot representing the predictions from a regression with two inddependent variables. The regression model "m3" has an intercept, 2 linear terms, and 2 squared terms. The coefficients are given by coef(m3). My approach to generating the predictions for a range of each of my IVs, "s" and "d" was

Dear All, I'm a beginner user in R and I would like to make a quadratic and plateau model in R. Can you help please with an example? Thanks so much -- Ahmed M. Attia Assistant Lecturer El-Khattara farm Station Agronomy Dept., Zgazig Univ., Egypt Visiting Scientist Haskell Agricultural laboratory Agronomy and Horticultural Dept., Univ. of Nebraska-Lincoln ahmedatia at zu.edu.eg

Hello folks, I am wondering how to do survival analysis with time-related IVs in R. For example, > > If we have time-related variables, such as the Overall Condition of 1990, 1991 etc., how can we include these variables in coxph model? > > > > If we can not use coxph model, do we need to rearrange the dataset to make it something like: > > ID time age

Hey there folks- I''m happy to announce the first useable release of my new pocket- framework Merb. Merb is a mongrel handler with built in controller and view templating with erb. It has a nice routing system similar to rails but much simpler. It uses some of the code from the camping handler and the rails handler and then some of its own secret sauce to form imho a nice fast

Got problems with plotCI (plotrix) I only want to plot the upper part of the error bar in my barplot I had the exact same commands working two months ago Now I wanted to change the legend and when I ran it again plotCI stopped working. To me it seems like there must some bug in R library(plotrix) library (graphics) x = matrix(c( 13.75516276, 3.944604404,

On 6 May 2016 at 22:21, Tanya Lattner via llvm-dev <llvm-dev at lists.llvm.org> wrote: >> How many is "many, many", actually? How many of these are really in fear, how many are just trying to impose their mindset without actually planning to contribute in earnest, how many are so fearful that they should really seek professional help? > > And this is illustrating my

Ok, that makes sense. I don't see this as a good enough argument to remove backslash support though. For problems like the clang_cc1 substitution mistakes, it would be much better to just improve the substitution support so that those cause immediate test failures. I would definitely support a move to make lit's substitution machinery more strict. For problems like your first search, I

On 08/12/2013 16:43, Daniel Dunbar wrote: > > With one-to-one mapping, it becomes possible to use simple tools > like grep to validate common mistakes like %clang / %clang_cc1 > mixups, a missing -o flag and so on. > > Right now there's no obvious way to do those checks and we've > ended up without an easy way to lint for broken tests as a result.