similar to: Asterisk + Ericsson PBX

Hi all, Did anyone had success with Q.Sig on * 1.2, especially with Alcatel 4400 (which seems to only support Q.Sig) ? I am thinking about interconnecting 15 sites together with asterisk (probably using IAX or SIP). I have a very heterogeneous environement using both PRI and BRI, but my pilot will start with the Alcatel at the central site. Any help/example is most welcome. BR, - Patrick -

I was just wondering if someone has experiences to use Asterisk in an existing Ericsson MD110 environment. Particulary I'd like to know if it is possible to use the MD110's system phones directly connected to Asterisk. I'm not very familiar with it but would it be possible to use ADSI with these phones? Are they more like analog or more like digital phones or is the protocol even more

hi, i'm having problems getting asterisk spliced between an E1 PRI (german Telco Arcor) and an Ericsson Business Phone 250 digital PBX. The Asterisk Server has a TE405P with it's port 1 connected to the E1 PRI provided by our telecommunications provider Arcor and port 2 connected to the E1 PRI of our Ericsson BP250. the setup before: Arcor TelCo PRI(E1)

Hello, I am trying to install my E1 card to make a conection with an Ericsson MD-110 PBX. I installed dahdi drivers as: dahdi_hardware pci:0000:04:08.0 wcte12xp- d161:8000 Wildcard TE121 ran dahdi_genconf and it created all my e1 ports. On the other side i also configured the pbx to communicate with TE121. On ericsson side, i have no error messages. On asterisk side, no error messages. But

I'm haveing trouble connecting an Ericsson Webswitch 100 to asterisk. Has anyone gotten a Webswitch running? When I try to connect asterisk thinks everything works fine, while the webswitch just rings. I belive chan_h323 is picking the wrong port to talk at the webswitch on, however I'm not sure, nor am I sure how to fix it. Any clues/hints? A tcpdump is attached to show the session.

I am trying to use TE110p card for Euro ISDN with Ericsson AMS switch. I consistently get one of the following errors: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 or PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1 My zaptel.conf file: -------------------------------- span=1,0,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 loadzone=us defaultzone=us

hi, well, most of the things work right now due to the help of peter svensson, but after heavy use of our ericsson BP250 today several problems appeared. i split into several mails as they are seperate problems. * i can't signal Busy to the calling party. asterisk receives busy from the ericsson PBX but does not forward this to the external caller. i tried with exten =>

Hello All I am wondering is someone knows how to configure the * to work with an Ericsson MD-110 with SL60 signaling?? through a TLU76 card. What is the right configuration in the zaptel.conf ? I currently have it configured as span=3.0.0,ccs,hdb3,crc4 but it doesn't detect anything when I connect it to the PBX and no activity can be seen either in the logs or in the asterisk console.

Hello, We are having issues with a NEW Sangoma A108D: -- Executing [691918892 at pbx1:1] Dial("SIP/xtravoip200-009d24b0", "DAHDI/g0/691918892|30|m") in new stack [Oct 1 10:04:43] WARNING[14171]: channel.c:3170 ast_request: No translator path exists for channel type DAHDI (native 76) to 256 [Oct 1 10:04:43] WARNING[14171]: app_dial.c:1237 dial_exec_full: Unable to create

Hi, Does anyone have any experience connecting asterisk to alcatel 4200 series pbx with bri cards? Does it should work with asterisk bri in NT mode, and alcatel bri with TE mode? Cheers, Igor Neves.

I have been asked by a potential customer whether we can connect an Asterisk box to an Ericsson MD110 that has an E1 port with ISDN-USR. They are unable or unwilling to upgrade their E1 port to QSIG. Has anyone here had experience of successfully making such a connection? I have found a couple of hits on Google that suggest it "should" work, but I'm after something a little more

Hi, Has anyone on this list tested out the new SE P1 phones ( http://www.uncrate.com/men/gear/cell-phones/sony-ericsson-p1/). It says it supports VOIP, wonder if it is working with asterisk. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070517/467cbea1/attachment.htm

Dear Telcotype Braniacs, I have tried doing a google search to find out what this switch looks like, what the physical interface is, but havn't been successful. I am quite new to the ISDN world so I'm not sure what to expect when I see this switch. Does anyone have any experience connecting to this switch? The following is basically all I have been given for info: 1) Ericsson, AXT121,

Hi list, I'm trying, as usual, to set up voicemail. It works, but signaling to phones, doesn't. Into XLite logs, I have: -- Messages-Waiting: yes Message-Account: sip:voicemail@mydomain.com Voice-Message: 1/0 (0/0) -- but nothing appear on the XLite screen. So, I understand that I'm able to send the right signal, but something is still wrong. Ideas? Thanks in advance -- .:FaberK:.

Hi, i know i am asking a lot of questions lately in this forum..sorry about that first of all. :) Ok, here is the deal.. I am trying to make a hybrid system with an ericsson MD110 and asterisk. Internally we have 4 digit phone extensions on ericsson.. and so in asterisk. So, what i want to do is to call pbx side without adding 9 or etc to the begining of the number from asterisk clients.. For

Do you have any extension in default context of your extensions.conf file to accept incoming calls ? It must be something like; exten => 12345678,1,Answer() exten => 12345678,2,Playback(Welcome) ... 12345678 = The DID number you are calling to reach E1 Idris -----Original Message----- From: Erick Perez [mailto:eaperezh at gmail.com] Sent: Thursday, July 26, 2007 7:03 AM To:

Hi folks, I've just updated my * and I noticed that from the update the uniqueid field into mysql, is not written and ASTPP do not charge the calls. I got an eye to cdr_mysql.c and I found that at line 212, into one insert query, uniqueid is missing. But I can be wrong. In any case, somebody got same problem? Any suggestions? Thanks to all. -- .:FaberK:. -------------- next part

Hi to all, I got a Cisco 2651XM wired to an E1 PRI. What I want to do is to pass all incoming calls to my asterisk. This is my actual conf: http://pastebin.ca/270677 with this I'm able to call my number from outside, but the call stop on the 2600, infact I can hear the tone, but I'm not able to forward calls to my asterisk. Anyone got an idea of my errors? Thanks to all. -- .:FaberK:.

Hello, I would like to convert an objects list such as objects() or ls() that outputs "a101" "a102" "a104" "a107" "a109" to read within a list statement as follows : list(a101,a102,a104,a107,a109) Thanks Tony

Hi all! I've got a problem with thia PA168S/AT320P telephone. I got 2 servers: one with SER and the other with Asterisk. All users are on SER and Asterisk is the gateway/voicemail. In these days I'm starting some tests using Asterisk accounts users. With this PA168S/AT320P, if I use it with a user from SER, it's ok but I can forget to use it with Asterisk users!!! I've also updated