similar to: Nortel IP2000

Does anyone know if Asterisk can function as a voicemail system for a Nortel Option 11 PBX? We will be connecting Asterisk to act as an IVR before sending calls to the Nortel and as a Voicemail system in case the user does not answer. That part is trivial, the only problem we have is that the customer wants the Voicemail light on the Nortel phones to light up when a user gets a new message.

I am trying to integrate a Nortel Norstar system with an Asterisk service using a TDM04B card (4 fxo). So far everyting works from Asterisk to Nortel. The problem is when someone dials from the Nortel PBX to the Asterisk server. Asterisk answers the call and provides a dialtone (with DISA) but appartently the DTMF tones are not passed to asterisk and the call cannot proceed. This only

I'm trying to get a basic connection setup between a nortel C10k and an asterisk box. All I want to be able to do is forward sip calls from the nortel switch to the asterisk box, and make calls from asterisk to the nortel.... ie: if someone dials my # on the PSTN, send it to asterisk and let me manage it, and if I dial 7xxx-xxxx drop the 7 and send it to the nortel switch I've done

Hello to all, I have a problem with an asterisk qsig. I have three machines: Nortel CS1000 --- Card Sangoma PRI ---> Asterisk QSIG ---SIP Trunk---> Asterisk I use Snom phones on Asterisk. If I call from Asterisk to Nortel, Nortel reminds me of the name of the person i'm calling and I visualize on the display of Snom phone, but if I call from Nortel to Asterisk, the QSIG does not send

Dear List, Need to know if anyone on this list has had any experience with using the Nortel BCM 50 for Call Account Reporting using an IP connection to a Linux / Asterisk interface? Presently, I have a BCM 50 installed that uses a local Lenova Small Form Factor PC with a windows XP / os that quit reporting because of a up-grade to the Nortel reporting software. Nortel support is now telling

Well I am entering into a realm that I don't know. 3 sites with Asterisk 1 site with Nortel Asterisk/Sip calls working fine between the 3 sites. Asterisk to Nortel set calls working fine. (call comes from asterisk to nortel and rings telephone, people answer and talk happens, hangup call clears) Nortel to Asterisk. Set on Nortel gets a busy signal. Any suggestions on what to look

Has anyone had any luck getting an asterisk box to talk to a Nortel C15K softswitch? Or any Nortel "sip" products? I've been playing with it for several days and can't seem to pass calls either direction. I know that whike the Nortel says the C15K speaks SIP, it really speaks nortel's implementation of SIP, but I thought I could get it to at least pass simple calls back

I have a couple of questions I'm hoping folks can help me out with. When I search the mailing list, I see folks doing what I'm interested in so here's hoping ! - How are people making out with interfacing to the 7960? I'm considering buying a number of these as they look quite feature rich. But, are they easy to interface to? - Will I be able to interface with softkeys on

I have gone through some archive about Nortel MICS (Meridian ?)+ Asterisk Integration but I'm not sure whether same as my case . 70 telephone sets | | Nortel MICS 4.1 --------- Asterisk | PSTN I have read the David Gomillion's Guide and got the idea . However, my plan is slightly different from what he did , I need to use Nortel MICS to connect to PSTN (I

Hi Srs. we have to integrate a Nortel MATRA M6501-L with Asterisk with a TE410P. All call from outside get into asterisk and asterisk send to Nortel in a correct way. My problem is when a call is made from Nortel to Asterisk. If we digit a national Number in Spain([98]ZXXXXXXX or 6XXXXXXXX) all work find. But if we digit an international number call doesn't progress. I Have seen in

Hello, I am using a Cisco-2,811 as a gateway between the Asterisk PBX and our Nortel TX-1 university's PBX. It is working but no names are exchanged. From the debug mode I see that the Cisco sends the display name (which does not appear on the Nortel's phones) and the Nortel does not bother to send it at all. I recall that when I had a pilot with Cisco CCM two years ago we had to set

I am connecting to a Nortel CS 1000. I can place calls out to an extension so we are half way there. When calling into the box I get the following from sip debug ip X. I get dead air when calling into the box. In my sip.conf I have a context of nortel and in extensions.conf the nortel context just has a s,1,Playback(demo-congrats). Any suggestions as to why the call in might not be working but

I am using asterisk 1.4.32 and wish to connect using SIP to a nortel 1000 switch with the ability to have 90 calls at a one time outgoing or incoming. the nortel reseller is asking me what to do. I dont know nortel at all. I thought I just needed a "SIP trunk and IP address of the their server and an account name, and provide her my IP address". They didn't know what to do with

Hi. I had successful confiured my Asterix PBX, but now I need to connect it to a Nortel Meridian phone plant, I got a Digium T100P on the machine I got the Asterisk and I already connect it with the phone plant, I need to know what configuration do I have to do so the ip extensions can make calls to the extensions of my plant Nortel. And extensions from the Nortel plant can call ip extensions of

Hello, I am wondering if anyone is using the Nortel 2001 2002 or 2004 phones on their asterisk implementation. My local dealer says they are not compatible with any open source implementations. Is there a phone compatibility list somewhere? Cheers Cian

All, I am connecting to a CS 1000 nortel PBX. I can call out, I have limited success with call in. I get debug traffic that a call is coming in but I get the message "Unable to create/find channel". I was expecting that incoming calls over the trunk would be handled from my sip definition and goto the nortel context. It is not. Below is the actual incoming call debug information. I am

Hi I want to connect asterisk 1.0.9 ( kernel 2.6.8-2 debian )with TE110P and Nortel meridian option 11c release 25.40 with NTBK50AA card which is An E1 card. But the main problem is the first stage that no sync occurs the * card never syncs with meridian card I am using euroisdn, ccs , hdb3, crc4 , pri_net on asterisk And I am assuming that meridian is using same as it is

folk, I see from the archives that the issue of nortel handsets not sending dtmf tones to asterisk has been discussed a couple of times, but there is something I quite havent seen answered yet. Is this dtmf issue a problem with the nortel handsets or the PBX itself? If the handset were changed to another one, would this issue be solved? Or must the PBX be changed completely? rgds eb

Anyone interfaced * to the Nortel option 61c pbx via T1's, pri, etc? Need to begin planning the implementation, purchase cards, etc. Any recommended approaches, configuration problems, etc? Off-list is fine if you'd like. Rich radamson @ routers . com

[asterisk-users] Asterisk <-> Nortel Phone Switch Date: Thu, 29 Nov 2007 07:52:17 +0000 (GMT) X-Mailer: sendEmail-1.52 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----MIME delimiter for sendEmail-20854.4017086787" This is a multi-part message in MIME format. To properly display this message you need a MIME-Version 1.0 compliant Email program. ------MIME delimiter