similar to: Re: Asterisk-Users Digest, Vol 18, Issue 144

Greetings fellow list members, I am trying to add some tricky functionality to Asterisk dialplan and I was curious if anyone else has come up with a solution to something like this. Basically I have phone representatives that log into one of several queues (not using chan Agent, we log in by the extension), and frequently these agents have to make attended transfer calls to outside numbers.

Hello I upgraded to CVS head yesterday (due to the lack of zaptel drivers working with 2.6.10) And noticed that now DBGet and DBPut have been deprecated in favour of the new Set/DB one. In the UPGRADING.txt in Asterisk it says: * The applications DBGet and DBPut have been deprecated in favor of functions. Here is a table of their replacements: DBGet(foo=family/key)

Yo all, As there has been some intrest, here's my updated version: I post it to "-dev" as well as "-users", as it may be of intrest to both. Inspired by the example in the tips & tricks-section of "http://www.junghanns.net/asterisk/", I built a more elaborate set of features. Currently, my implementation supports call- forward unconditional, on no answer

hi, This question is about DBPut and DBGet, Can i put about 1000 keys in a single family, (only once for the lifetime) for ex. exten => _X.,5,DBput(family/key1=${val}) ... exten => _X.,5,DBput(family/key1000=${val}) like above and if i later retrieve it, randomely, with inbound calls, will it affect performance? Surajee -------------- next part -------------- An HTML

I have put together this call forwarding and dnd config: I'm sure it can be dome with macro's but I couldn't figure that out... anyone care to input. 74 Turns DND on my phone will not ring, drops caller to voicemail... 73 Turns DND off 72+ext forward your extension to another extension and voicemail is left at the forwarded extension. 71 turns off call forwarding. ; dnd Could

Hi, do i need some other software than asterisk to use database commands - dbput and dbget in asterisk ? regards Marian -- SUNTEQ s. r. o. Hviezdoslavova 9 # Prievidza # 971 04 # Slovak republic Tel: +421-46-5430 754 # Fax: +421-46-5439 144 http://www.sunteq.sk/ ------------------------------------------------------------ A mind is like a parachute... it only works when it's open.

Hei! I have a little problem with the subject. I use Asterisk CVS-HEAD-09/06/04-12:42:56 as a production *, but I do tests with a newer version Asterisk CVS-HEAD-11/18/04-10:01:32. Ok the problem is: in extension.conf I use macro for redirection, found on wiki pages: [macro-stdexten] ; ; Standard extension macro (with call forwarding): ; ${ARG1} - Extension(we could have used ${MACRO_EXTEN}

I set up a call forwarding script in extensions.conf which uses the AstDB but I'm wondering if I reboot the server, will the entry in AstDB still reside? What the script does is when a call comes in, it check to see if there is a null value or a call forward number. If null, it will call the local office connections. If there is a number, it calls that. Now I just need to know if I reboot

Where can I learn the syntax for DBput and DBget? is it working with MySQL? do I need to set up tables? URiel -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030508/a2598dc8/attachment.htm

Dear All, I was trying to enable call forwarding, following the steps of the link on voip.org regarding this issue it doesn't work and the phone I am trying to implement on is still ringing. below is my conf in extensions.conf and the CLI output during the process. My configuration is : exten => _*5X.,1,DBput(CF/${CALLERIDNUM}=${EXTEN:2}) exten => _*5X.,2,Hangup exten =>

hello all, another desperate request for help debugging my dialplan... from a certain extension i do the following: DBput(CFIM/${CALLERIDNUM}=${CALLERIDNUM}) a NoOp to the console says DBput: family=CFIM, key=2122022001, value=2122022001 and database show says /CFIM/2122022001 : 2122022001 so far, so good. but in a macro, when i try to get the data, exten

Yo, Inspired by the example in the tips & tricks-section of "http://www.junghanns.net/asterisk/", I built a more elaborate call divert-feature. This one validates if the extension a call-forward is to be set to is actually valid for the current context and additionally saves this context into the DB and always uses it to originate the divert from, as you can't expect the

Hi all, I'm using Asterisk 1.0.9-BRIstuffed-0.2.0-RC8o on box A with a TE410P (EuroISDN cpe) connected to another similar asterisk box B acting as EuroISDN master. I'm performing some load tests by contiously feeding up to concurrent 30 call files to /var/spool/asterisk/outgoing/ on box A which inititate via a dialplan context/extension a outbound call (redirected via chan_local) to

Does anybody has a php code for using DBput (DBget, DBdel) from a web interface, which database is used for astrisk? bye Ronald

Hi ! I'd like to connect phpgroupware to asterisk: when a user click on a phone number, his phone rings and he gets connected to the number he just clicked. I've tried by putting various files in /var/spool/asterisk/outgoing, without results (we are using SIP phones + CAPI channels). Is there a way to do that ? (If it's impossible (something impossible in *, LOL ?!?) I will create

Andi - I have experienced the same issue you mention and gotten no reply as to a way to fix it. I finally implemented "blacklist" into my Asterisk and added "Anonymous", "anonymous", "unknown", "Unknown", etc., into my blacklist file. When those come in with an IP address instead of a phone number but have no real name, they get the

My setup : Trixbox 2.6.1 & TE410P running well .: 1. I need to store the CallerId of the PSTN caller with his language preference so that next time he is played the prompt in his language that he chose the first time.What would be better - storing his number in the Asterisk DB and using Dbput and DBget ? or storing it in MySQL from the dial plan and quering it everytime to see the callers

I'm trying to figure out a way to make my own agent login, because I don't like how the default works. I have the login and logout working fine using the dynamic add and remove commands, but I need to be able to create a list of users and passwords. I thought of a way to do it using a list of passwords, but the agent would only ever be prompted for their password. I won't want that.

hi just donwloaded the 1.6.1 branch and made configure & install. so far so good. after staerting asterisk with: asterisk -vvvvcr Could not load features.conf == Registered application 'ParkedCall' == Registered application 'Park' == Manager registered action ParkedCalls == Manager registered action Park == Manager registered action Bridge == Manager registered

(Sorry if this has hit the list before. I sent it yesterday, but never saw it come through) I actually got rid of my phone service.. no more pots line in my house. But, I miss my call screen macro. Any way to do this with a SIP channel? (Obviously the parking isn't the problem, but rather recording their name). I set it up so they should only have to record their name once provided they