similar to: SPA-941 auto-answer capability

does anyone get a hold of the SPA-941 Provisioning Guide? i tried call Sipura's tech support, seems like none of them heard of the term "remote provisioning". they kept refering me to their web site which i've check thoroughly, and could not find any documentations on the SPA-941. finally they gave me a phone number to call, which appears to be a fax machine. that's when i

Hello! We are using several Linksys SPA-941 in our office. After IP change occur devices seems not to be reachable, actually unavailable! Devices is connected, e.g. we can place a call using SPA-941 but can not receive any calls... Kim __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

I dont recall the SPA-941 playing a stutter tone in the previous firmware but it is driving me nuts, anyone know where to turn it off? Kerry Garrison Director of Technical Services Tech Data Pros - Orange County's Mobile IT Service Provider (949) 502-7819 x200 - <mailto:kerryg@techdatapros.com> kerryg@techdatapros.com <http://www.techdatapros.com/> http://www.techdatapros.com

Has anyone had any experience with the Linksys SPA-941 when it comes to multiple line appearences? The 941 comes with 4 line appearence buttons which can individualy be configured to point at any extension. The phone is capable of 2 extensions out of the box with the option to add 2 more for a license fee. The 941 manual states that, "The Call Waiting function is activated when a

Has anyone got any information on bulk provisioning of Linksys SPA-941/94s? There is an overview in the admin guide but it refers to a different provisioning guide that I haven't found anywhere. Kerry Garrison Director of Technical Services Tech Data Pros - Orange County's Mobile IT Service Provider (949) 502-7819 x200 - <mailto:kerryg@techdatapros.com> kerryg@techdatapros.com

Hello, This is not exactly an Asterisk question, but I was encouraged to seek advice here anyway. The kindness of the * open source community is legendary :) I am getting going with an Asterisk 1.2 box, and I'm having trouble getting good quality transmit sound using handsets with VoIP phones. I'm primarily trying to focus on SPA-941, but also experimenting with Aastra 9113i and Uniden

Hi, Is it possible to get the XML config off of a Linksys SPA-941 or 942 phone? I've tried http://[ip address]/admin/spacfg.xml however that file doesn't appear to exist. Thanks.

Hello. A while back, I noticed an odd problem with our SPA-841 phones connected to Asterisk. Now we are having a different odd problem, and I'm not sure if they're related. I wonder if anyone else has experienced anything else like this, and/or if there is any reasonable explanation? Occasionally, one of our SPA-841's will spontaneously start up with "Welcome to Comedian

I'm experiencing a problem with a Sipura SPA-941 not available for incoming calls after Asterisk & Freepbx upgrade. I can dial out with the phone gto any other internal or external ext. It is registered with the Asterisk server. When I dial the Sipura directly from any other extension, it goes directly to vm. I have other Sip softphones that are working fine. A sip debug when calling the

I'm trying to disable call waiting for Linksys SPA-941, but unfortunately as far as I have seen, there are no parameters on the web interface regarding this feature. I just want callers to hear the busy tone when the called party is at the phone. Probably I can accomplish this by using the "disable call waiting" in asterisk as well, but I have not been able to find any

I have read the user reports on the Aastra 480i SIP phones, but the last report is from October, and the advice was to stay away from these units. I was looking at the cisco 79XX series or the SPA-941's, but they don't have backlit displays. I also like POE support so I don't have to run multiple wires to the phones and makes for a neater look. I dislike the looks of the SNOM

All other phones we work with will auto-answer when we do this: [macro-paging1way] exten => s,1,SIPAddHeader(Call-Info: answer-after=0) exten => s,n,Page(${PAGINGLIST}) exten => s,n, Hangup The SPA phones simply ring. I have verified that Auto Answer Page is set to yes (the default). We've tried a variety of firmware versions and phone ages, going back to an old 942 and new 504s.

Is anyone out there using any of the newer linksys phones since Cisco took over? I am more specifically looking at the spa-941 & 942's. Just curious about call quality, programability, and functionality with asterisk. I have read through the literature, but would like some real world feedback. Thanks

We're investigating audio quality issues in our system; maybe someone can help. We're using Asterisk as a basic PBX, with a single PRI on one side and SIP phones on the other: Sipura SPA-841's. We're experiencing several audio effects which seem to commonly correspond to network failures (packet loss, high jitter, etc manifested as "robot voice", dropouts, periodic

Sipura has implemented auto-answer in version 0.9.5 of the SPA-841 firmware. However, it is implemented via the Call-Info header, which Asterisk stable doesn't currently support. The attached patch implments a quick hack to support the Call-Info header from the Dial() application by way of setting the CALL_INFO variable. For example, the following macro can be used to dial up a single

I recently posted a question RE the Sipura 941 and using different ring tones, Thanks to hads I managed to use SET(_ALERT_INFO=Classic-1) to achieve this but trying this on the GXP 2000's didn't seem to do the trick?? Has anyone one had any luck on this topic? Also haven't been able to find any info on an auto-answer for the GXP 2000, again, I have succeeded in doing so with the

Hi all, i need an XML file format which is used in remote provisioning of different spa devices. Please somebody tell me the format or tell me where can i find it on the internet. I also need a list of parameters which are configured using auto-provisioning. -- Best Regards Rizwan Hisham Software Engineer Axvoice Inc. www.axvoice.com -------------- next part -------------- An HTML attachment was

Hello I'm about to order a GrandStream GXP-2000 and a Linksys SPA-921 I'd like to have some user feedback about how those phones perform, and whether their LCD screen displays both the caller ID name and number (The GrandStream BT-100 only displays numbers, which isn't very helpful). Thank you.

Greetings, We are currently testing a Sipura SPA-3000 as a gateway from our Asterisk system to a PSTN line for 911 access. We have a number of locations and want to place an SPA-3000 in each, connected to a PSTN line that will provide the correct ANI/ALI information to 911 for each location. It all works great, except for a reasonably significant (4 seconds) delay between when the SPA-3000

Hey, all. I quoted a customer about $100 for some cheap SIP phones. I was planning on using the BT-102's, but he called said they look like "Princess phones," and I have to admit that he has a point. Some of the other inexpensive phones look decent, but (for example) the SPA-841's wiki entry says the remote end gets a lot of static. Since it'll be being used from a noisy