similar to: Call Waiting CallerID not showing up

Hi, According to the wiki, we need to have both callwaiting=yes and callwaitingcallerid=yes , and that's what I have in zapata.conf. I can hear the call waiting alert tone when a 2nd call comes in during an established call, and I can switch between the calls without problems. However, CallerID on the 2nd call does not show up with the call waithing alert tones. Am I missing something?

Dear All, I am a newbie about asterisk. I have 1x X100P card 3x Sip phone I got aware of problem, after I saw the caller id on my sip phone. I noticed that if I receive a call from GSM Operator A, I can see caller id. But any other operator, I got no caller id, even my direct PSTN service operator. So at that moment I was using *1.0.9. than I changed to asterisk@home 1.3(1.0.9). I got same

Hi, I have "callwaiting=yes" in my zapata.conf, and "Call Waiting Serv: Yes" in the PAP2s. However, there's sitll no callwaiting on the PAP2s. Everything else work fine. Any ideas? Am I missing something somewhere? Thank you. AK -------------- next part -------------- An HTML attachment was scrubbed... URL:

I've got a rather strange callerid problem and don't know how to debug it. I've got two X100P cards installed in a RH9 box and both are connected to individual pstn pots lines. Both are equipped with callerid and both display callerid info on regular analog phones (verified 100%). Incoming and outgoing calls are handled just fine. When an incoming call arrives on one X100P card, *

> I have "callwaiting=yes" in my zapata.conf, and "Call Waiting Serv: Yes" > in the PAP2s. > However, there's sitll no callwaiting on the PAP2s. Everything else work > fine. Any ideas? Am I missing something somewhere? Hi Andy, You also need to set "CW Setting: Yes" on the User 1 and User 2 screens. Or, dial from each line, whatever you have set for

Hey all, posted this the other day, but re-read it & realized I didn't give enough info to be useful.. so I thought I'd try again.. I'm using AAH 2.0 (* 1.2.0) and am unable to transfer a call when I initiate the outgoing call. In AMPs general settings, I've tried changing the Dial command using tT but transfers are only available when I'm the recipient of the call, not

FC2, Asterisk 1.0.0, Zaptel 1.0.0 TDM400P Port 1 FXS Port 4 FXO Standard analogue handset plugged in with pstn line. Problem: I have 2 analog phones that I use, when plugged directly into pstn line both phones work perfectly, dialing no issues. When I plug the handsets into the TDM400P, one works perfectly the other drops random numbers. Its like the tone is slightly different on the second

Hi, I have a weird situation where I have a noop command putting the callerid of the caller on my asterisk console so I know who is calling as a test, but it is putting the callerid of my extension in instead of the callerid of the incoming line. My /etc/asterisk/zapata.conf is [channels] context=default ;switchtype=national usecallerid=yes cidsignalling=v23 cidstart=polarity hidecallerid=no

Hi all, I've been trying to wrap my mind around this one for several days now. How can I 'debug' the CallerID reception on a Zap/POTS channel? I have a POTS line with CallerID and a Digium TDM11B card right now. I have my signalling set to ks for both sides, can make and receive calls just fine. But I never get CallerID on incoming calls. I get the following messages: Aug 11

Specs FC2, Asterisk 1.0.0, Zaptel 1.0.0 TDM400P Port 1 FXS Port 4 FXO Standard analogue handset plugged in with pstn line. Problem: When I go to dialout it drops numbers on the outgoing number. Keys dialed from handset were 9 0418800185 I tried hitting the keys slowly as well as at my normal speed, all tones are heard in the handset for all numbers.

Hi, I'm just starting out with Asterisk, in combination with a TDM400, filled with 2 FXS on channels 1 and 2, and 1 FXO on 4. Having just started, all I want right now is to be able to answer incoming calls on a phone connected to channel 1. The trouble is the caller id. I have caller id enabled on my line, my phone supports it, and when I connect the phone directly to the line, it works.

Hi there, So I've finally got our Definity and * box talking back and forth, but can't figure out how get callerid sent from the Definity to *. Has anyone had any success with this? I've tried every combination of zapata.conf variables pertaining to callerid with the same results: Accepting call from '' to 'xxxx' on channel 0/1, span 1. On the SIP phones I receive the

Hi I am in the middle of move a small business over from legacy PABX + PSTN lines to VOIP infrastructure. I borrowed a spa9000 to place between the PABX and the PSTN lines. I have had this going for a while (>5 months) and it has been working fine (some issues with echo and other minor things), which is why I am moving to asterisk. I bought a tdm410 with 3 fxo + fxs. The fxs is connected to

Hello all, I have one Asterisk 1.4.21 system connected to a North American POTS line. Normally hangup detection works fine, and Asterisk hangs up properly if you are talking to a caller and they hang up; but occasionally a call comes in (typically from a US telemarketer) where the caller hangs up just as voicemail recording is starting, and you get a voicemail recording of dialtone (then

I don't succed in getting callerId on incoming calls on a zap trunk. I am using a zaphfc card When a call is received, one line in asterisk pbx says -- Executing SetCIDName("Zap/32-1", "") in new stack second parameters should be the caller ID, but it is not set The callerid is not hidden at source, so I think that is some kind of setting in zapata.conf I am using

Hello. After doing much web searching and searching archives of this mailing list, I see that my question has been asked at least 6 separate times but no answers have been attached. In a nutshell, is there a way for a SIP phone to easily hook flash a ZAP analog trunk mid-call? (This is important when trying to make use of features on a PSTN analog line such as call waiting, call forwarding,

Hello All, I have new TDM04B installed and working fine with Asterisk 1.0.5 built on RedHat 9. All is working fine except CallerID that bothers me big time. I have several Panasonic and Sony phones and CallerID works fine with it (when I plug in the line into phone instead into Asterisk I get CallerID) but fails with Asterisk. I am based in California (San Francisco) and my Telco is SBC

Hello. I am a spanish student, so excuse my English. I have this HW: - 2 X100P PCI with two analog lines plugged in. These lines are two extensions of a panasonic PBX. Zap/1 = X100P <-- analog line --> extension #237 PBX Panasonic Zap/2 = X100P <-- analog line --> extension #245 PBX Panasonic - 1 TDM20B with two analog telephones plugged in. Zap/3 = TDM20B

Hi, I just upgraded by 1.0.x home server to 1.2.2. Overall the upgrade went fine, but a strange problem has cropped up with the CALLERID name value of incoming calls from the X101P card. When an incoming call is presented (via Vonage ATA), the calledid value getting double quotes up from: -- Executing NoOp("Zap/1-1", """WIRELESS CALLE" <1404xxxxxxx>") in

Hi, I restarted my * box before and now my second X100P card has stopped showing up in Asterisk. It shows up in my dmesg in Gentoo, but only 1 channel is being registered: [chan_zap.so] => (Zapata Telephony w/PRI) == Parsing '/etc/asterisk/zapata.conf': Found -- Registered channel 1, FXS Kewlstart signalling == Registered channel type 'Zap' (Zapata Telephony